Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
XTC-3D 680g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 680g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

680g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE



R457.90  Inc VAT
Arcade Kit DIY Replacement Parts USB Encoder to PC Joystick and Buttons (C23 Arcade kit)
Features :

Each encoder can support one joystick.
Use them to DIY your own Arcade game machine.
The Zero Delay USB Arcade Encoder is a fully compatible plug and play solution, simply plug in your joystick and buttons into the encoder, plug the USB cable into the Pi, map your buttons in RetroPi and away you go - it really is that easy! You can use multiple encoders at the same time, so they're great for multiplayer arcade machines!
 
Specifications :

Joystick Size: Approx. 95x60x100mm
Encoder Board Size: Approx. 85x35mm
USB Cable Length: Approx. 1.8m
Colour: Red

We have tested this unit on Raspberry Pi using Retropie and a Windows 7 PC using MAME.
 
Package includes :

1 x Encoder Board
1 x USB Cable
1 x 5 pin Cable for Joystick
1 x 5 Pin Joystick
8 x 30mm Push Buttons
2 x 24mm Push Buttons
13 x Cables for Buttons

Get Retropie on the Raspberry Pi
ModMyPi setup guide
R499.90  Inc VAT
DIY Arcade 8 Way Joystick Replacement Part (3A2 DIY Joystick)
Features :

8 way operation.
Mountable in control panels.
Easy to operate with high sensitivity.
Use it to DIY your own Arcade gaming machine.
 
Specifications :

Top Ball Diameter: Approx. 35mm
Total Size: Approx. 95x60x100mm
 
Package includes :

1 x Joystick
Cables not included
 
Learn about RetroPie
Compatible with Zero Delay Arcade USB Encoder & Wire Set (Not included)
Compatible like buttons


Spec Diagrams :

1Pc DIY Arcade 8 Way Joystick Replacement Parts for Fighting Game Competition

1Pc DIY Arcade 8 Way Joystick Replacement Parts for Fighting Game Competition
R169.90  Inc VAT
Particle Photon (Headers) (3B5 Particle Photon(Headers))

Particle’s IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120MHz ARM Cortex M3 microcontroller with a Broadcom WiFi chip in a tiny thumbnail-sized module called the PØ (P-Zero).

These specific Photons come with headers, making prototyping easy as each board can plug directly into standard breadboards and perfboards, and may also be mounted with 0.1" pitch female headers on a PCB. The Photon is not only powerful, but easy to use. The small form factor is ideal for IoT projects with cloud-connectivity. To get you started quickly, Particle has added a rock solid 3.3VDC SMPS power supply, RF and user interface components to the PØ all on a small single-sided PCB.

Your Photon comes with access to the Particle Cloud, a free cloud service. The Particle Cloud has some great features for building connected projects, including over-the-air firmware updates, an easy-to-use REST API, and firmware development supported by web and local IDEs.

Features

  • Particle PØ Wi-Fi module
    • Broadcom BCM43362 Wi-Fi chip
    • 802.11b/g/n Wi-Fi
    • STM32F205 120Mhz ARM Cortex M3
    • 1MB flash, 128KB RAM
  • On-board RGB status LED (ext. drive provided)
  • 18 Mixed-signal GPIO and advanced peripherals
  • Open source design
  • Real-time operating system (FreeRTOS)
  • Soft AP setup
  • FCC, CE and IC certified
  • Pre-Soldered Headers

Documents

R379.90  Inc VAT
Creality Limit Switch 3D Printer part (3B6 creality limit switch)
High Quality Limit Switch 3D Printer part for CNC 3D Printer RepRap Makerbot Prusa Mendel RAMPS 1.4 Board
R44.90  Inc VAT
XTC-3D 180g protective coating for smoothing and finishing 3D printed parts (WH XTC 3D 180g)

Description

XTC-3D® is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D® cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

How To

Features

Inexpensive to Use – 1 oz covers 100+ square inches (see coverage information below).

90% Time & Labor Savings: XTC-3D® fills in 3D print striations and creates a smooth, high gloss finish. The need to post finish is almost eliminated.

Coat any 3D Print Surface - XTC-3D® can be applied to both SLA and SLS prints. It works with PLA, ABS, Laywoo, Powder Printed Parts and other rigid media. It also can be used to coat EPS, EPDM and urethane foam as well as wood, plaster, fabric, cardboard and paper.

XTC-3D® does not contain VOC’s, phthalates or phosphates.

Pack Size

180g

Need more info? You can watch MatterHackers video at https://www.youtube.com/watch?v=ChkHuFU90WE


R199.90  Inc VAT
Assembled Extruder Hot End kit for CREALITY 3D Printer CR-X Dual-color Printing Nozzle (CR-X dual extruder)

Description:

 

  • Material: Aluminum & Stainless Steel & Brass
  • Installation type: external thread connection
  • Scope of application: 3D printer
  • Nozzle size: 0.4mm
 

Features:

100% brand new and high quality.

Tip of the nozzle, aluminum heating block, Throat pipe (built-in Teflon).

MK10 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V  40W.

 

 

Package includes:

1 x CR-X Extruder Hot End Kit 

R1,099.90  Inc VAT
Discontinued: Picade HAT + Parts Kit (AW Picade HAT & parts kit)

Turn your Raspberry Pi into a retro games console! Picade HAT includes joystick and button inputs, a 3W I2S DAC/amplifier, and soft power switch. Nice!

We've taken all the great features of the Picade PCB and crammed them onto this super HAT. Simply plug it onto top of your Pi, wire up your controls, and install our driver! It's ideal for your own custom arcade builds or interfaces that need big colourful buttons and sound.

Features

  • I2S audio DAC with 3W amplifier (mono) + speaker
  • Safe power on/off system
  • 4-way digital joystick inputs
  • 6 x game button inputs
  • 4 x utility button inputs
  • 1 x soft power switch input
  • Breakout pins for other GPIO features

The I2S DAC blends both channels of digital audio from the Raspberry Pi into a single mono output. This is then passed through a 3W amplifier to power any connected speaker.

The board also features a soft power switch that allows you turn your Pi on and off safely without risk of SD card corruption. Simply tap the connected button to start up then tap it again to fully shutdown and disconnect power.



R634.52  Inc VAT
Discontinued: Machifit 15pcs 400mm CNC Parts Kit (AW 3D3 400mm CNC parts kit)
Specifications:
Type: Sliding Rail kit
Glide Path: Linear Guide
Material: 45 Steel
Accuracy Class: H
Slide Fixed Way: Lock Type, Lock Type


15pcs 400mm CNC Parts Optical Axis Guide Bearing Housings Aluminum Rail Shaft Support Screws Set

15pcs 400mm CNC Parts Optical Axis Guide Bearing Housings Aluminum Rail Shaft Support Screws Set

 

 
Package Includes:
2 pcs x 8x400mm Steel Optical Axis
2 pcs x 55x13x30mm Zinc Alloy Pillow Block Bearing
4 pcs x 42x32x11mm Aluminum Rail Shaft Support
1 pcs x 400x8mm Stainless Steel Lead Screw Rod with Nut
4 pcs x 8x34.5mm Slide Bushing
2 pcs x 5x8mm D19L25 Flexible Shaft Coupling
R457.31  Inc VAT
R625.34
MS Spare parts kit (outdoor unit) for DIY Weather Station (WH weather sensor kit)

Description:

This kit includes the sensor parts to build your own DIY weather station

Includes the below parts:


Have a look at the Rasberry Pi Foundation weather project for a wired solution to use these sensors:
https://projects.raspberrypi.org/en/projects/build-your-own-weather-station

For the brave there is a discussion on sniffing the signal from the RF sender:
https://www.raspberrypi.org/forums/viewtopic.php?t=96780

And some good reading at https://rayshobby.net/wordpress/reverse-engineer-wireless-temperature-humidity-rain-sensors-part-1/
R1,399.90  Inc VAT
MS Top double mounting arm spare part for weather station (1B6 MS top mount double)
This is the top double mount arm spare part for the weather station.
It can support the below:

R109.90  Inc VAT
MS Weather Station Side mounting arm for rain gauge spare part for weather station (1B6 MS side bracket weather)
This side mounted bracket is used for the rain gauge on the weather station pole
R109.90  Inc VAT
Per Page      1 - 12 of 12
  • 1