Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors
R72.90  Inc VAT
Designed with learning in mind
R89.90  Inc VAT
Ever wanted to use two different operating systems with the same Pi at the flick of a switch?
R269.90  Inc VAT
220V 360 Degree Recessed Ceiling Occupancy PIR Motion Detector Time Delay Light Switch (220AC pir switch occupancy)
Description:

Are you interested in saving energy? These new Recessed PIR motion/ occupancy sensor is perfect way to start saving energy and also on your bills.

Specifications:
Voltage:AC220-240V/50Hz
Load:800W (incandescent bulbs, halogen bulbs)/200W ( energy saving lamp, fluorescent lamp, LED bulb)
Detection Angle: Ceiling Installation 360°/Wall Mounted 140°
Sensing Distance: Max 8M (24°C)  Adjustable Distance
Delay Time: 5S, 30S, 1Min, 3 Min, 5 Min, 8 Min Time Adjustable
Light Control Settings: 10 ~ 2000Lux Light Control Adjustable

Package Includes:
1 X PIR Ceiling Light Switch
R299.90  Inc VAT
DC 12V PIR IR Sensor Module Relay (12VDC pir relay occupancy)
Description:

Based on infrared technology, automatically control products, when someone enters switch sensing range, pir detect changes in the human body infrared spectrum, switch automatically switches the load, do not leave the sensing range (who are active), the switch will continue to be on.

Person leaves, switch off automatically load delay.

Convenient and  saves energy.

Specifications:

1. Bipolar design: three-wire connection, and the load capacity 100W

2. Automatic sensors: switch immediately turned on with delay off after you leave.

3. Relay switch: can withstand high current output, high power load.

4. Adjustable delay time: 10 seconds -350 seconds

5. Ultra Low Power: Switch own power <0.0088W/h (annual power consumption of <0.077 degrees)

6. Induction: Passive

7. Operating Voltage: DC 12V

7. Inductive mode: passive infrared pyroelectric

6. Quiescent Current: 50uA

7. Sensing Distance: 3 to 5m

8. Load Capacity: Maximum: 100W

9. Induction Angle: About 120°, 100 ° up and down

10. Load Range: Various types of DC LED lamps, load

11. Ambient Temperature: -20 to 50℃

12. Output Mode: Relay control output DC 12V high level / low level

13. Size: 45 x 30mm, PIR lens diameter: 12mm

Wiring instructions:

Red wire: Power input 12V
Black wire: Power output -12V
Yellow wire: OUT 12V power output

Package includes:

1 x DC 12V PIR IR Sensor Module Relay
R119.90  Inc VAT
USB 2.0 Female Socket to DIP 2.54mm Pin 4P breakout Board (USB A breakout female)
Description:

This module can easily convert your USB charger's power and data cable into conventional DIP 2.54mm pins.

Package includes:


1 x USB female adapter board

Resources

R19.90  Inc VAT
Official Raspberry Pi 3A Red & White Case (Pi3A RW case official )

Please Note: This is only the case. The Raspberry Pi and cables are not included.

Description:

The Official Raspberry Pi 3 Model A Case is here! Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your Raspberry Pi 3A ! The case is composed of two separate pieces: a base, and a removable top that enables the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!

Features of the Official Raspberry Pi Case

  • Fabulous Raspberry Red and White Colour Combination
  • 2 Part "Snap-Fit" Enclosure
  • Cut-outs for all connection points
  • MicroSD card cut-out
  • Plastic LED light pipes
  • Stick on rubber feet for case stability
  • Super slim design measuring: 75mm x 65mm x 20mm
R69.90  Inc VAT
230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors (JST header kit)
Description:

JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.

JST XH connectors were developed based on the high reliability and versatility of the NH series connectors




Package Includes:

2pin = 10Sets =20PCS   
3pin = 10Sets =20PCS   
4pin = 10Sets =20PCS   
5pin = 10Sets =20PCS   
Pin Connector Terminal :150PCS

230Pcs XH2.54 2P 3P 4P 5 Pin 2.54mm Pitch Terminal Kit / Housing / Pin Header JST Connectors
R72.90  Inc VAT
Camera Module for Raspberry Pi Zero without infra-red filter (zero cam NOIR)

How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Description:

This minimal Camera for the Pi Zero is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there Lennie.

Otherwise it's an economical and svelte solution for birdcams, bodycams, home security and simple computer vision projects.

Update: Without an IR filter, which is useful for night vision, especially when using IR lights to illuminate the subject

Only for Raspberry Pi Zero with CSI camera port.

Approx dimensions of camera: 10mm x 11.4mm x 5.1mm

Getting started with PiCamera

R329.90  Inc VAT
10mmx15mm Spst 2pin On/off G130 Boat Rocker Switch 3A/250V Black (10x15 rocker switch BLACK)
Description:

Rocker Switches house a button for operation that can be pressed on either end like a seesaw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices.

Specifications:
  • 250 V
  • 3A
  • 10mm x 15mm

Package includes:

1 x Black Mini Rocker Switch



Resources:

Python library
Introduction to Buttons and Switches
Types of buttons and switches
R4.90  Inc VAT
Infinity Cascade GPIO Expansion Board 32 IO Extend Adapter Module For Raspberry Pi (Infinity Cascade board)
Description:

This module is designed specifically for the Raspberry Pi IO expansion Modules, which can effectively solve the issue of Raspberry send IO port. Module uses four 74HC595 chips to expand 32 IO ports, the top of the module will expand the IO of Raspberry Pi again that can be cascaded for more IO expansion modules with theoretically unlimited expansion.

Features:
 
--Expanded 32 GPIO
--Infinity expansion by adding more modules
--Use wiring PI API,sample code
 
Port:
--Raspberry Pi 2*13port
--Raspberry Pi 2*13 cascade port
--Q0-Q31 expanded IO port
 
Product Parameters:

--Working voltage:2.4v-5v
--IO voltage:3.3v
--Expanded 32 unidirectional IO
--Connection through SPI
--100 MHz (typical) shift out frequency
--8-bit serial input
--8-bit serial or parallel output
--Specified from -40C to 85C and from -40C to 125C

Typical Application:
 
--Drive a lattice screen
--Driver numeric display
--Drive matrix LED


How to Use:

Insert the module that the silk screen says 'RPI IN'. Pay attention don’t make the direction reversed! The correct direction of insert module is above the Raspberry Pi’s PCB; The 8*4header in the module are Q0-Q31 expanded GPIO, they can connect to the peripheral through the Dupont Line. The header which near silk screen write 'EXT' expand GPIO of Raspberry Pi, user can cascade the other module or the same module.

Package Includes:


1x Raspberry pi IO expansion board
R112.62  Inc VAT
R149.90
Pi Stop - Traffic Light Add-on for Raspberry Pi (GPIO 3.3V stand traffic light)
Description:

The Pi-Stop is a low cost hardware module designed to allow Raspberry Pi users to take their first steps into interfacing with the real world.

Designed with the learning in mind, everyone will recognise and identify its familiar elements encouraging their use along-side their own projects.

Move past the Stop light

The Pi-Stop is designed to remove many of the common hurdles people are faced with when getting started using hardware with the Raspberry Pi. Often it is difficult to know what components to use and how to connect them, the Pi-Stop makes it simple by plugging directly onto pre-set positions on the Raspberry GPIO connector.

By plugging the Pi-Stop directly on to the Raspberry Pi GPIO header, no extra cables or wires are needed. Unlike many other add-on boards, they do not block unused GPIO pins, keeping them open for other uses. The Pi-Stop can be fitted in 4 standard locations, allowing up to four Pi-Stops to be controlled independently or combined with other hardware.

Prepare to go!

The Pi-Stop provides a simple stepping stone, between pure screen based programming and using physical hardware to interact with the real world. Components like the Pi-Stop will provide a flexible and non-restrictive way to build understanding through experimenting.

Since it is only a step away from a bag of components, it also allows the programming of hardware to be introduced, and the electronics involved can be introduced separately, if desired. Allowing the pupils to discover they can control real things, and then again to discover they can also build their own circuits and control them in exactly the same way.

Often, people are faced with a magic board which they plug in and tell it to do stuff, however it isn't always clear to them why or how it does it. By providing something which they can remove and replace with something (apparently) completely different (- wires, breadboards and LEDs) they will be able to understand the link.

By keeping the hardware very simple, it allows better understanding of what is happening, and allows space to come up with your own projects and apply the concepts with your own ideas in mind.

GO Full throttle

The documentation and guides are openly available for the Pi-Stop for educational use. There will be guides, tutorials and workshop material available all of which can be taken as is[available as PDF format] or adapted to your own needs [available in markdown format].

It is encouraged that similar materials can be submitted back for others also to share and make use of.

The materials will demonstrate the concepts, methods and provide the building blocks to explore ideas and take learning further by with creative projects, activities and games.

Pi-Stop Documentation

The following material is available (in both PDF and markdown format):

Designed with learning in mind
R89.90  Inc VAT
IIC/I2C/TWI/SPI Serial Port Module 5V 1602LCD For Display (serial adapter board)
Description:

This is another great IIC/I2C/TWI/SPI Serial Interface. As the pin resources of Arduino controller is limited, your project may be not able to use normal LCD shield after connected with a certain quantity of sensors or SD card. However, with this I2C interface module, you will be able to realize data display via only 2 wires. If you already has I2C devices in your project, this LCD module actually cost no more resources at all. It is fantastic for Arduino based project.
I2C Address: 0X20~0X27 (the original address is 0X20,you can change it yourself)
The backlight and contrast is adjusted by potentiometer
Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable


Specifications:

Compatible for 1602 LCD Supply voltage: 5V

Package includes:

1 x serial interface module
R34.90  Inc VAT
RJ45 RJ12 Network Cable Crimping Tool (Network Crimping Tool BLUE)

Description:

Crimps 8P8C/RJ-45,6P6C/RJ-12, and 6P4C/RJ-11 connectors

Ratcheted handle movement for added precision

Plastic-covered handles to reduce fatigue

R264.14  Inc VAT
Pimoroni - Coupé 7" Touchscreen Display Frame (Stand Display Red Coupe)
Description:

Protect your new 7" Raspberry Pi Touchscreen with this lovely little display frame from Pimoroni! Designed with a slimline profile, it's perfect for keeping your Raspberry Pi screen upright, and at an ideal viewing angle!

Please note: Raspberry Pi Touchscreen and Raspberry Pi are not included

Pimoroni's Touchscreen Display Frame Features:

  • Slim profile made up of only 3 layers keeps the screen protected
  • 2 Legs hold the screen at an ideal viewing angle
  • Provides support and protection to the back of the screen
  • All Raspberry Pi Ports accessible
  • Leaves touchscreen free for touching
  • No tools required for assembly
What's in the box?:

1 x touchscreen Display Frame
Assembly screws
R191.67  Inc VAT
R249.90
Yellow blue double colour 128X64 OLED LCD Display Module For Arduino 0.96" I2C IIC SPI Serial (OLED display)
Description

OLED displays driven by SSD1306 driver IC. SSD1306 is a CMOS OLED driver with controller for OLED dot-matrix graphic display system.
This is a popular OLED display with Portable and wearable devices becoming the new trends. 

Specifications:

Driver: SSD1306
Interface type: IIC interface
Pin definition: GND, VCC, SCL, SDA
        1:GND(OLED power supply)
         2:VCC (OLED 3.3~5V)
         3:SCL(OLED IIC Clock line)
         4:SDA(OLED IIC Cable)


What's in the box?:

1 x OLED display

Resources:

We used these instructions to get it working on Pi: https://circuitdigest.com/microcontroller-projects/ssd1306-oled-display-with-raspberry-pi
R64.90  Inc VAT
One Roll 8 Colors 30AWG Wrapping Wire Tinned Copper Solid PVC insulation 250m(all colours in total) (multi wrapping wire 250m)

Description

Single-core tinned copper wire is used, which is easy to weld and anti-oxidation, and is not easy to break. The copper wire can withstand a high temperature of 80°C, making it suitable for a variety of thermal overload applications. The single-strand copper core has strong resistance to tension and surge current, which is convenient for shaping. Packaged by reel, the copper core has a moderate diameter and clear lines, making it easy to use and store. Copper wire is suitable for welding notebooks, motherboards, LCD screens, displays and other circuit boards.

Features

  • Material: Plastic and Metal
  • Total length of about 250M
  • Line: 30AWG
  • Single sheath outer diameter of about: 0.55mm, copper core diameter of about 0.25mm.
  • Temperature: 80 degrees, single-strand copper crossing tin, have antioxidant effects.

What's in the box?

  • 1 x PCB Test Core Line Single Tinned Copper Wire 8-color Board Cable Roll
R249.90  Inc VAT
2 in 1 Dual Micro SD Switcher for Raspberry Pi (Dual SD switch)
Description:

Ever wanted to use two different operating systems with the same Pi at the flick of a switch? Well now you can!

This 2 in 1 micro SD card switcher is specially designed for the Raspberry Pi, and you can now enjoy the convenience of using two micro SD cards at the same time on the same Pi!

To transfer between your operating systems, insert two micro SD cards into the adaptor (one on top, and one at the bottom, Then ensuring the Pi is switched off and power removed, switch the switch on the adaptor! Next time you boot, it will boot the secondary micro SD card!

2 in 1 Dual Micro SD Switcher for Raspberry Pi Features:

  • Designed for Raspberry Pi B /2/3/Zero
  • Dual micro SD card slot with switch
  • Enables the use of two operating systems on the same Pi without needing to remove/swap the micro SD cards.
  • Dimension: 36mm(length) x 24mm(width)

During testing we noticed that both micro SD cards have to be inserted for the unit to operate.
Ever wanted to use two different operating systems with the same Pi at the flick of a switch?
R269.90  Inc VAT
Automatic DC 5V-30V 10A Infrared PIR Motion Sensor Switch For LED Light Strip (black pir switch DC)

Description:

Great for small 12 volt DC solar panel LED Lighting systems to conserve battery power; also well suited for occupancy LED lighting control and security LED Lighting systems

Specifications:

  • Influence control: Light Infrared PIR
  • Two light modes: all day/at night(Auto switching on when detecting people coming.)
  • Super energy saving, super sensitivity within 7 meter distance.
  • Built in light sensor which can identity day and night by itself,
  • Sensor sensitivity distance: ≥7m
  • Sensor sensitivity angle: 145°
  • Load current:10A
  • Working voltage:DC 5V-30V
  • Delay time: If people leave, light will delay 30s-150s(Adjustable) to turn off
  • Certificate: CE
  • Suitable for use in homes, wardrobes, kitchens, stairs, camping tents...
  • Size:50mm x 43mm x 20mm(approx)
  • 5.5 x 2.1mm male to male cable length:1M(approx)
  • 5.5 x 2.1mm male to female cable length:1M(aprpox)
  • Color:Black
Package includes:
  • 1 x PIR sensor
  • 1 x 5.5 x 2.1mm male to male cable
  • 1 x 5.5 x 2.1mm male to female cable
R249.90  Inc VAT
R249.90
Mini 3-Pin Tactile Switch KW12-3 5A 125V Roller Microswitch (10) (black roller switch(10))
Features:

Operating temperature: -40°C to 70°C
Rated voltage: AC 125V-250V
Per weight: 2g
Current rating: 5A
Size: 20 x 10 x 6mm (L X W X H)
PCB Terminals Circuit Board
With Roller Lever Limit

Working principle:

By external mechanical force transmission elements (by pins, buttons, levers, rollers, etc.) will be used to force action on a reed, producing reed instantaneous action when action shifted to the critical point, so moving contact with the fixed contact spring at the end of the action point fast on or off.
When the force is removed on the drive components, action reed produce reverse action force transmission element reverse stroke when the action reaches a critical point reed, instantaneous reverse action.
Feature: contact spacing is small,short stroke action,according to the power of small,fast-break

Application:

Apply in  A computer mouse, car mouse, automobile electronic products, communications equipment, military products, test instrument, gas water heater, gas burner, small home appliance, microwave oven, electric rice cooker, floating ball supporting equipment, medical equipment, building automation, electric tools, ect.

Package included:

 10 x Micro roller switch
R39.90  Inc VAT
Adafruit PiTFT Plus 320x240 2.8" TFT Capacitive Touchscreen(40 pin) (2.8 display touch cap 40pin)
Description:

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad.

The screen looks much nicer, with a black bezel and glass overlay.

This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A , B ! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath.

The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.

Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.

Raspberry Pi computer and enclosure not included! As of July 22nd, 2015 this display comes fully assembled with tactile switches too

Check out Adafruit's detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT.

TECHNICAL DETAILS

  • Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
  • PCB Dimensions: 56mm x 85mm x 11mm / 2.2" x 3.3" x 0.4"
  • Weight: 47g

Datasheets, EagleCAD PCB files, Fritzing object and more in the tutorial!

R806.01  Inc VAT
5MP Camera IR-CUT 5MP 8 mm Adjustable Focus Night Vision NoIR Camera for Raspberry Pi 3 Model B (adjustable camera)
Description:

Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision, Type B

Features
  • Raspberry Pi Camera, supports all revisions of the Pi
  • Embedded removable IR-CUT filter, eliminating color distortion in the daylight
  • Comes with infrared LED, supports night vision
  • 5 megapixel OV5647 sensor
  • Adjustable focus distance
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 1.2
    • Focal Length : 8mm
    • Angle of View (diagonal) : 40 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension: 31mm x32mm
How to use Picamera with Raspberry Pi OS Bullseye: https://www.youtube.com/watch?v=E7KPSc_Xr24&list=WL&index=2

Note: to use the camera with Raspberry Pi Zero / Zero W / Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable

Note: the actual image pixels is 5MP, which depends on the sensor, so it doesn't matter that there is a 3MP silk mark on the camera.

Development Resources

Wiki : www.waveshare.com/wiki/RPi_IR-CUT_Camera_(B)


R459.90  Inc VAT
Mini Piano Module for micro:bit Touch Keys to Play Music (micro:bit piano)
Overview

Isn't it coooool to play your favorite song using the BBC micro:bit? Just plug it into this little piano, and enjoy.

Features
  • micro:bit edge connector, directly pluggable
  • Buzzer to play music
  • Onboard capacitive touch controller, 13x touch keys through I2C interface
  • 4x RGB LEDs, controlled by only one signal pin
  • Breakout module control pins, micro:bit SPI pins, and some of the GPIO pins, easy expansion
  • Comes with development resources (micro:bit graphical demo/python code/user manual, etc.)
Specifications
  • Touch controller: TTP229
  • LED: WS2812B
  • LED color depth: 16777216 colors
  • Dimension: 85mm x 56mm
  • Operating voltage: 3.3V
Pinouts
SYMBOLDESCRIPTION
VCCPower (3.3V input)
GNDGround
P0Buzzer control pin, related to mcro:bit P0
P1LED control pin, related to mcro:bit P1
SCLTouch keys control pin, I2C clock
SDATouch keys control pin, I2C data
Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/Piano_for_micro_bit

R159.90  Inc VAT
Per Page      141 - 160 of 418