Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
RP2040-Zero Pico-like MCU Board Based on Raspberry Pi MCU RP2040 Mini ver with pre-soldered headers (WS RP2040-Zero WH)
RP2040 MCU Board Zero, a Pico-like MCU board based on Raspberry Pi RP2040, Castellated module, suitable for SMD applications. Pre-soldered Headers.


Board specifications

  •     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  •     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  •     264KB of SRAM, and 2MB of on-board Flash memory
  •     USB-C connector, keeps it up to date, easier to use
  •     Castellated module allows soldering direct to carrier boards
  •     USB 1.1 with device and host support
  •     Low-power sleep and dormant modes
  •     Drag-and-drop programming using mass storage over USB
  •     29 × multi-function GPIO pins (20× via edge pinout, others via solder points)
  •     2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
  •     Accurate clock and timer on-chip
  •     Temperature sensor
  •     Accelerated floating-point libraries on-chip
  •     8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started



29 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board?



  1. USB Type-C connector
  2. W25Q16JVUXIQ 2MB NOR-Flash
  3. BOOT button press it when resetting to enter download mode
  4. RESET button
  5. WS2812 cool RGB LED
  1. ME621 low dropout LDO, max current 800MA
  2. RP2040 dual-core processor, up to 133MHz operating frequency
  3. RP2040 pins 10x solder points, 9 of which are for GPIO
outline dimensions


Wiki: RP2040-Zero

What's in the box?

1 x RP2040-Zero

R109.90  Inc VAT
RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040 with LCD and pre-soldered headers (WS RP2040-LCD WH)
Description:

RP2040 MCU Board with LCD, a Pico-like MCU board based on Raspberry Pi RP2040 with pre-soldered headers. Compatible with most of the Raspberry Pi Pico add-on modules.


Board specifications

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.

In additional, there'rs also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.

Key features include:

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core Arm Cortex M0 processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 2MB of on-board Flash memory
  • USB-C connector, keeps it up to date, easier to use
  • 0.96inch 160×80 pixels 65K colorful IPS LCD display
  • Lithium battery recharge/discharge header, suitable for mobile devices
  • Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
  • Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components)
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming using mass storage over USB
  • 26 × multi-function GPIO pins
  • 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C ,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started


Pico-like lcd code found at : 
sudo apt-get install p7zip-full
cd ~
sudo wget  https://www.waveshare.com/w/upload/7/74/Pico_LCD_code.7z
7z x Pico_LCD_code.7z -o./Pico_LCD_code
cd ~/Pico_LCD_code
cd c/build/



26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board



  1. USB Type-C connector
  2. BOOT button press it when resetting to enter download mode
  3. RESET button
  4. 0.96inch IPS LCD display 160 × 80 pixels, 65K colorful
  5. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  6. TPS63000 high efficiency DC-DC buck-boost chip
  1. ETA6096 high efficiency Lithium battery recharge manager
  2. RP2040 dual-core processor, up to 133MHz operating frequency
  3. W25Q16JVUXIQ 2MB NOR-Flash
  4. DEBUG points
  5. Pinout
outline dimensions



Wiki: RP2040-LCD-0.96

What's in the box?

1 x RP2040-LCD with pre-soldered headers
R279.90  Inc VAT
RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040 Plus version with pre-soldered headers (WS RP2040-PLUS WH)
RP2040 MCU Board Plus with pre-soldered headers, a Pico-like MCU board based on Raspberry Pi RP2040. Compatible with most of the Raspberry Pi Pico add-on modules.


Board specifications

Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now.

Same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.

What's different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.

Key features include:

  •     RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  •     Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
  •     264KB of SRAM, and 4MB of on-board Flash memory
  •     USB-C connector, keeps it up to date, easier to use
  •     Lithium battery recharge/discharge header, suitable for mobile devices
  •     Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch
  •     Castellated module allows soldering direct to carrier boards
  •     USB 1.1 with device and host support
  •     Low-power sleep and dormant modes
  •     Drag-and-drop programming using mass storage over USB
  •     26 × multi-function GPIO pins
  •     2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
  •     Accurate clock and timer on-chip
  •     Temperature sensor
  •     Accelerated floating-point libraries on-chip
  •     8 × Programmable I/O (PIO) state machines for custom peripheral support
C/C++,MicroPython support

Comprehensive SDK, dev resources, tutorials to help you easily get started



26 × multi-function GPIO pins

configurable pin function, allows flexible development and integration 



What's On Board?



  1. LED user LED (not power indicator)
  2. ETA6096 high efficiency Lithium battery recharge manager
  3. TPS63000 high efficiency DC-DC buck-boost chip
  4. USB Type-C connector
  5. BOOT button press it when resetting to enter download mode
  6. W25Q32JVSSIQ 4MB NOR-Flash
  7. RESET button
  1. RP2040 dual-core processor, up to 133MHz operating frequency
  2. Battery header MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
  3. Pinout compatible with Raspberry Pi Pico
  4. USB test points connecting to USB interface
  5. BOOT test point connecting to BOOT button
  6. DEBUG points
outline dimensions



Wiki: RP2040-Plus

What's in the box?

1 x WS RP2040-Plus WH
R189.90  Inc VAT
Per Page      1 - 3 of 3
  • 1