Search

Description:

Contains: INJECTOR and SPLITTER.

Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, Router BOARD, WRAP boards and other devices using passive POE injection.

Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 and 7,8 -

1. It is very simple to connect a passive PoE.
On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment.

The equipment is now connected by them.

Input / Output Specifications:

Supports Voltage: 5V, 12V, 24V, 48V
Max Output Current 0.4A Max.
Over Current Protection None


General Specifications:

 Operating Temperature 0° ~ 45°
Storage Temperature -30oC ~ 70oC
CASE OF MATERIAL PVC
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5
Humidity Up to 90%
Weight: 24g*4DC
Plugs 2.1mm x 5.5mm x 12mm
Length 155mm

Package Included:
 

POE HAT for Raspberry Pi

Power Over Ethernet HAT for Raspberry Pi 3B /4B, 802.3af-compliant
(any backward-compatible future versions will be supported as well)

OLED for real-time monitoring temperature, IP, and fan status



The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B /4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipment, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.


Features at a glance

 Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B /4B
 PoE (Power Over Ethernet) capability，802.3af-compliant
 Fully isolated switched-mode power supply (SMPS)
 0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
 Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
 Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins

Specifications

PoE power input:     37V ~ 57V DC in     
OLED size:     0.91"
PoE power output:     5V 2.5A DC out     
OLED pixels:     128×32
Network standard:     802.3af PoE     
OLED driver:     SSD1306
Dimensions:     56.5 × 65mm     
OLED display colour:     white

For use with Raspberry Pi 3B /4B



Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs

Power Over Ethernet

providing both network connection and power supply for your Raspberry Pi in one cable





0.91" OLED display

128 × 32 pixels, I2C-bus controlled
monitoring processor temperature, IP address, fan status in real-time



Cooling fan

allows auto running on powerup OR programmable control, configured by switch
automatically turn on/off depending on the Raspberry Pi processor temperature



Onboard PCF8574 chip

PCF8574 IO expander for I2C bus, providing 8 IO pins, of which P0 for fan control
and extra spare pins on solder pads (P1-P7, INT)



Pinout definition



Outline dimensions


Resources & Services

 WIKI: www.waveshare.com/wiki/PoE_HAT_(B)

Description:

Switch type: Unmanaged.
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000),
Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex.
MAC address table: 8000 entries,
Switching capacity: 16 Gbit/s.
Networking standards: IEEE 802.3,IEEE 802.3ac,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x.
Power connector: DC-in jack.
Power over Ethernet (PoE): 4 ports

Power Over Ethernet

The first four ports of the DGS-1008P support the IEEE 802.3at PoE protocol. Each of the four ports can supply up to 30 watts, for a total PoE budget of 68 watts, allowing users to attach an IEEE 802.3at-compliant device to the DGS-1008P that requires no additional power. 

What's in the box?

1 x  DGS-1008PE unmanaged switch

Industrial Gigabit PoE Splitter, 5V 2.5A Type-C power output. IEEE 802.3af/at-compliant Gigabit Ethernet




Features at a glance

•     Incorporates original chip Si3404, high-efficiency, high-safety, stable-performance
•     10/100/1000Mbps auto-negotiation Ethernet port
•     802.3af/at-compliant PoE (Power over Ethernet) standard
•     Isolated SMPS (Switching Mode Power Supply), effectively protecting the powered device
•     5V DC output, suitable for powering Raspberry Pi and other small-scale network devices
•     Black dull-polish metal case, sturdy and rugged, higher protection level, better heat dissipation

Specifications

Power supply	supports 1/2(+); 3/6(-); 4/5(+); 7/8(-) powering
PoE input voltage	37V ~ 57V
Type-C output	5V 2.5A (MAX)
Cable	Cat-5 UTP
Standard	IEEE 802.3 af/at PoE Ethernet
Data rate	10/100/1000Mbps
LED indicator	PoE power input indicator
Dimensions	86 × 30 × 25mm (l × w × h)
Operating temperature	-40℃ ~ 85℃

Original chip solution

Incorporates Si3404, high-integration, high-efficiency, more safe and reliable 

Isolated circuit protection, effectively protecting the powered device

Industrial grade protection case

aluminum alloy case, sturdy and rugged, higher protection level, better heat dissipation 

Powering the Raspberry Pi or other 5V-powered network devices by PoE switch

for reference ONLY, Raspberry Pi and switch are NOT included. 

Description:

PoE Ethernet / USB HUB BOX for Zero. Dull polish surface, well designed, nice & dust-proof. PoE 802.3af-compliant Ethernet Port | 3x USB 2.0 Ports.


Features at a glance

The PoE-ETH-USB-HUB-BOX is a HUB kit with PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.

•     Designed for Raspberry Pi Zero, compatible with Zero series boards
•     Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
•     PoE (Power over Ethernet) feature, 802.3af-compliant
•     Fully isolated SMPS (Switch Mode Power Supply)
•     3x extended USB ports, compatible with USB 2.0 / 1.1
•     Angle rounded design, smooth hand feeling, "simple snap" case lid
•     Quality ABS material, dull polish surface, anti-fingerprint
•     Comes with two different lids, changing as you like

Specifications

PoE power input:     37V ~ 57V DC in
Power output:     5V 2.5A DC out
Network standard:     IEEE 802.3af-compliant PoE
Dimensions:     72.80 × 37.50 × 45.80 mm


Compatible with Raspberry Pi Zero series

specialized pogo pin connection, dedicated cut-outs for Zero series, plug-and-play 

USB1 ~ USB3, compatible with USB 2.0 / 1.1

USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation

"simple snap" design, easy to change, allows attaching other Zero HATs



Application example



Outline dimensions





Resources:

Description

The D-Link DGS-F1006P-E 6-Port 10/100/1000 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DGSF1006P-E is compact and operates silently, making it ideal for most rooms and offices.

– 6x 10/100/1000 Mbps Ethernet ports
– 2x Uplink ports
– 4x PoE ports
– IEEE 802.3af/at Power Over Ethernet (PoE) enables installation in hard to reach locations
– 60 W total power budget
– Up to 30 W power output per PoE port


What's in the box?

1 x 6-port D-link switch

Description:

The Raspberry Pi PoE HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.

Specifications:

Standard: IEEE 802.3at-2003 PoE
Input voltage: 37–57 V DC, Class 4 device
Output power: 5 V DC/4 A
Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling

Features:

• Fully isolated switched-mode power supply
• Fan control

Operating temperature: 0 °C to 50 °C
Production lifetime: The Raspberry Pi PoE HAT will remain in production until at least January 2027
Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance

Physical specifications


What's in the box?:

1 x Power over Ethernet Plus (POE ) HAT

WARNINGS

• This product shall only be connected to a Raspberry Pi via the four PoE pins.
• Any external power-sourcing equipment/power injector used to enable an Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well ventilated environment, and if used inside a case, the case should not be covered.
• The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of
use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice when used in conjunction with Raspberry Pi computers.
• Where peripherals are connected that do not include the cable or connector, the cable or connector must offer adequate insulation and operation in order that the relevant performance and safety requirements are met.


SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source. Raspberry Pi computers and the Raspberry Pi PoE HAT are designed for reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered, and handle it only by the edges to minimise the risk of electrostatic discharge damage.