Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
WS RPi Camera (E), Supports Night Vision (Camera (E) Night Vision)
Description

850nm wavelengths specification of an infrared LED is recommended for the Camera.

Features

  • Raspberry Pi Night Vision Camera, supports all revisions of the Pi
  • 5 megapixel OV5647 sensor
  • Camera specifications
    • CCD size : 1/4inch
    • Aperture (F) : 2.9
    • Focal Length : 3.29MM
    • Diagonal : 72.4 degree
    • Sensor best resolution : 1080p
  • 4 screw holes
    • Used for attachment
    • Provides 3.3V power output
    • Supports connecting infrared LED and/or fill flash LED
  • Dimension : 25mm x 24mm x 6mm

Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero Camera Cable
Raspberry Pi 2/3 ribbon cable included

Downloads

Getting started with PiCamera
Development resources:
user manual, etc.
Download: www.waveshare.com/wiki/RPi_Camera_(E)

OS releases from Bullseye onwards will no longer support the older camera system and applications. There is no Python interface yet. An alternative to the old Picamera, imaginatively named Picamera2, is in development. Raspberry Pi OS Buster is still available to download if you’re not ready to use Bullseye
R289.90  Inc VAT
WS 7inch HDMI LCD capacitive touch (C) display, 1024x600, IPS, supports various systems (1024x600 7inch HDMI LCD (C))
7inch HDMI LCD (C) Features
  • 7inch IPS screen, 1024x600 hardware resolution
  • Capacitive touch control
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
    • When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
    • When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Backlight can be turned off to lower power consumption

Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable



Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)

FAQ
Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

R1,169.90  Inc VAT
LCD module 3.5 inch TFT LCD display for Arduino UNO R3 Board and supports mega 2560 R3 (Arduino LCD display 3.5inch)
PLEASE NOTE: Arduino board and USB cable are not included

LCD module 3.5 inch TFT LCD screen 3.5 " for Arduino UNO R3 Board and support mega 2560 R3



Watch a video on this item at https://www.youtube.com/watch?v=PAPW97X6IRM
 


Package Includes:
 
 1 x 3.5 inch TFT LCD


Resources:

We have found the best Libary to use to run this display is: MCUFRIEND_kbv Library for Uno 2.4, 2.8, 3.5, 3.6, 3.95 inch mcufriend Shields
You can find out more: https://github.com/prenticedavid/MCUFRIEND_kbv
Open Arduino IDE
Click on Sketch -> Include library -> Manage Libraries -> and search for MCUFRIEND
Once installed, you can test your display using the provided examples
LCD Not Touchscreen
R369.90  Inc VAT
camera module OV7670 Supports VGA CIF auto exposure control display active size 640X480 for Arduino (Arduino camera)
Description

OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. Through the SCCB bus control, you can output the entire frame, sub-sampled, take the window way affect the data resolution of 8 bits. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can be programmed through the SCCB interface. OmmiVision image sensor applications unique sensor technology to improve image quality by reducing or eliminating the optical or electronic defect, such as fixed pattern noise, tail-blooming, clear and stable color image.


    • Low voltage suitable for embedded applications
    • Standard SCCB interface compatible with I2C interface
    • RawRGB to RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2)output format
    • support VGA, CIF, and from CIF to 40x30 the size
    • VarioPixel subsampling way eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
    • ISP has eliminate noise and dead pixel compensation function
    • Support image scaling
    • The lens is the loss of light compensation
    • 50/60Hz detection
    • The saturation automatically adjust ( UV adjustment)
    • edge enhancement automatically adjust
    • Noise Reduction automatically adjust
Key parameters
  • photosensitive array 640X480
  • O voltage 2.5V to 3.0V ( internal LDO to core supplies ) the
  • power operation 60mW/15fpsVGAYUV
  • Sleep < 20 μ A
  • temperature operation from 0 ° C to 50 ° C
  • ( 8 -bit) output format ? YUV/YCbCr4 RGB565/555/444 GRB4: 2:2: 2:2 Raw RGB Data
  • Optical size of 1/6 "
  • field of view angle of 25 °
  • maximum Zhen rate 30fps VGA
  • Sensitivity 1.3V / (Lux-sec)
  • signal to noise ratio of 46 dB
  • dynamic range of 52 dB
  • browsing mode progressive
  • electronic exposure
  • area of 3.6 μ mx 3.6 μ m
  • dark current 12 mV / s at 60 ° C


Package Includes:

1 x camera board

Resources:

How to Use OV7670 Camera Module with Arduino
R59.90  Inc VAT
Bakeey 10Amp 10 Ports USB Charger Smart Desktop Quick Charging USB Charger White (10 port usb power supply)
Description:

Charge up to 10 USB devices simultaneously from one wall outlet. Simply connect any USB mobile device, such as an iPad, iPhone, Tablet PC, Smartphone etc. and quickly charge all your devices from one place.The USB Charger is durable and lightweight and works great at home or at the office. This is a must-have travel companion to charge all your power-hungry devices.

Specifications:

Brand: Bakeey
Model: XBX-09L
USB Port: 10 USB
Plug: EU
Product Weight: 170g
Dimensions: 112mm x 68mm x 26mm
Colour: White

Technical Parameters:

Total Power: 50W
Output: 5V 10A(in total shared between ports)

Package  Includes:

1 x 10 USB Ports Charger
R624.90  Inc VAT
High precision Capacitive Fingerprint Reader (B) UART/USB dual ports (WS USB/UART finger print sensor)
Description:

The Capacitive Fingerprint Reader (B) is a fast and stable capacitive fingerprint module specialized for secondary development, suits integration applications.

By incorporating high performance Cortex core processor, high security commercial fingerprint algorithm, and advanced semiconductor fingerprint sensor, this module is designed as a intelligent integration module with functions including fingerprint enrolling, image processing, template generating and storing, fingerprint matching and searching, etc.

  • Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure/calculation
  • Commercial fingerprinting algorithm, stable performance, fast identification
  • Sensitive detection, just touch the collecting window lightly, without pressing
  • Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions
  • Dual communication, UART or USB
  • Comes with rich development resources (related command documents, tools, and examples for Raspberry Pi/Arduino/STM32)
Specifications:

parametervalue
SensorSemiconductor (capacitive)
Module dimension34 × 28.5mm
Sensor dimension33.4 × 20.4mm
ImageDPI 508
Image resolution208 × 288
Greyscale256 (8-bit)
Sensing area14.6 × 10.6mm
Fingerprint capacity3000
Security level1-5 configurable, 3 by default
the higher value, the lower FAR (False Acceptance Rate), yet the higher FRR (False Rejection Rate)
Encryption key64-bit encryption
Image collecting rate20fps
Matching time0.5s
Dynamic current<40mA
Operating voltage3.3-5V
Communication portUART or USB
ESDSD IEC 61000-4-2 LEVEL 4 positive/negative 15KV air discharge
Baudrateconfigurable: 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600bps
115200bps by default

What's in the box?

1 x UART/USB finger print sensor

Outline dimensions



R899.90  Inc VAT
Maker Pi RP2040 - Simplifying Robotics with Raspberry Pi RP2040 (Maker Pi RP2040 robotics)
Description:

Cytron Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - RP2040, embedded on a robot controller board. This board comes with dual channel DC motor driver, 4 servo motor ports and 7 Grove I/O connectors, ready for your next DIY robot / motion control project. Now you can build robot, while trying out the new RP2040 chip.

The DC motor driver onboard is able to control 2x brushed DC motors or 1x bipolar/unipolar stepper motor rated from 3.6V to 6V, providing up to 1A current per channel continuously. The built-in Quick Test buttons and motor output LEDs allow functional test of the motor driver in a quick and convenient way, without the need of writing any code. Vmotor for both DC and servo motors depends on the input voltage supplied to the board.



Features:

  • Powered by Rapberry Pi RP2040
    • Dual-core Arm Cortex-M0 processor
    • 264KB internal RAM
    • 2MB of Flash memory
    • the exact same specifications with Raspberry Pi Pico
  • Robot controller board
    • 4x Servo motors
    • 2x DC motors with quick test buttons
  • Versatile power circuit
    • Automatic power selection: USB 5V, LiPo (1-cell) or Vin (3.6-6V)
    • Built-in 1-cell LiPo/Li-Ion charger (over-charged & over-discharged protection)
    • Power on/off switch
  • 13x Status indicator LEDs for GPIO pins
  • 1x Piezo buzzer with mute switch
  • 2x Push button
  • 2x RGB LED (Neopixel)
  • 7x Grove ports (flexible I/O options: digital, analog, I2C, SPI, UART...)
  • Preloaded with CircuitPython by default
  • Mouting holes
    • 4x 4.8mm mounting hole (LEGO® pin compatible)
    • 6x M3 screw hole

What's in the box ?

  • 1x Maker Pi RP2040
  • 4x Grove to Female Header Cable
  • 1x Mini Screwdriver
  • 1x Silicone Rubber Feet (Pack of 4)

Resources:



Powering the Maker Pi 2040

There are three ways to supply power to the Maker Pi RP2040 - via USB (5V) socket, with a single cell LiPo/Li-Ion battery or through the VIN (3.6-6V) terminals. However only one power source is needed to power up both controller board and motors at a time. Power supply from all these power sources can all be controlled with the power on/off switch onboard.




Maker Pi RP2040 features all the goodness of Cytron's Maker series products. It too has lots of LEDs useful for troubleshooting (& visual effects), is able to make quite some noise with the onboard piezo buzzer and comes with push buttons ready to detect your touch.






Simple Robotic projects done

(* Only includes the Maker board - All other contents are for idea / advertising purposes only*)












R209.90  Inc VAT
D-Link DGS-1008PE 8 port Unmanaged Switch with POE on 4 of the ports (DL DGS-1008PE 8 port switch)
Description:

Switch type: Unmanaged.
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000),
Basic switching RJ-45 Ethernet ports quantity: 8. Full duplex.
MAC address table: 8000 entries,
Switching capacity: 16 Gbit/s.
Networking standards: IEEE 802.3,IEEE 802.3ac,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x.
Power connector: DC-in jack.
Power over Ethernet (PoE): 4 ports

Power Over Ethernet

The first four ports of the DGS-1008P support the IEEE 802.3at PoE protocol. Each of the four ports can supply up to 30 watts, for a total PoE budget of 68 watts, allowing users to attach an IEEE 802.3at-compliant device to the DGS-1008P that requires no additional power. 

What's in the box?

1 x  DGS-1008PE unmanaged switch
R1,490.90  Inc VAT
Solar Power Manager (C), Supports 3x 18650 Batteries, Multi Protection Circuits (WS solar manager 3x18650)
Description

Compatible with 6V~24V solar panels, supports 3x 18650 batteries recharged from solar panel, or TYPE-C power adapter. 5V/3A regulated output.

SAFETY PRECAUTIONS

Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
   
Do not reversely connect the polarities when recharging or discharging the battery.
Do not use inferior charger/charging panel to recharge the battery.

Do not mix use old batteries with new ones, avoid using batteries of different brands.
   
When buying a Lithium battery, you should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturers and ensure the batteries will work stably and safely by aging test.

Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.

Batteries should be stored carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.

Product features

The Solar Power Manager (C) is compatible with general 6V~24V solar panels. It can recharge the 18650 rechargeable Li-ion batteries through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).

The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects.

  • Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel.
  • Flexible battery recharging: from solar panel or USB TYPE-C power adapter.
  • Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
  • Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency
  • Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
  • Embedded battery holder, supports 3x 18650 rechargeable Li-ion batteries
  • Several LED indicators, for monitoring the status of solar panel and battery
  • Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to use

Supports 6V~24V solar panels


5-level voltage switch, for setting solar panel input voltage to improve efficiency 



3x 18650 batteries support

Embedded battery holder for rechargeable Li-ion batteries 



Application example

solar-powered control system for MCUs / development boards like:
Raspberry Pi / Jetson Nano / Arduino... 



Note: for reference ONLY, the Raspberry Pi, display, solar panel are NOT included. 

Resources introduction



  1. Solar panel input
    recharging through DC-002 jack or screw terminal
  2. TYPE-C recharging/output port
    supports 5V power adapter for recharging
    supports PD protocol quick charge adapter
    supports PD/QC/FCP/PE/SFCP multi protocols output
  3. USB output port
    5V/3A regulated output
    supports PD/QC/FCP/PE/SFCP multi protocols output
  1. Battery on/off switch
  2. BOOT button
  3. Quick charge indicator
  4. Solar panel status indicators
    Solar Warning: lights up if solar panel is reversed
    Solar Charge: lights up when recharging from solar panel
    Solar Done: lights up when the battery is fully recharged
  5. Battery life indicators

Outline Dimensions




What's in the box?

1 x solar manager

Resources & Services

R389.90  Inc VAT
D-Link DGS-F1006P-E 250M 6-Port 10/100/1000 Switch with 4 PoE Ports and 2 Uplink Ports (DGS-F1006P-E 6 port switch)
Description

The D-Link DGS-F1006P-E 6-Port 10/100/1000 Switch with 4 PoE Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network. Built with home and small business users in mind, the DGSF1006P-E is compact and operates silently, making it ideal for most rooms and offices.

– 6x 10/100/1000 Mbps Ethernet ports
– 2x Uplink ports
– 4x PoE ports
– IEEE 802.3af/at Power Over Ethernet (PoE) enables installation in hard to reach locations
– 60 W total power budget
– Up to 30 W power output per PoE port


What's in the box?

1 x 6-port D-link switch
R989.90  Inc VAT
Per Page      1 - 10 of 10
  • 1