Search
Search Criteria
Products meeting the search criteria
Description:
The function of this aluminum heat sink is to cool down a board and make it operate safely.
The aluminum heat sink can reduce the risk of hardware failure due to overheating.
Better efficiency if used with a fan
Material: Aluminum
Color: Black
Weight: 20g
Size: 40 x 40 x 11mm
Applications:
LED, Power IC, Memory, Transistor etc.
This heatsink doesn't come with Heatsink Adhesive Tape.
Package includes:
1 x Aluminum heat sink 40 x 40 x 11mm
If your project is particularly resource-hungry then the Raspberry Pi may run a little hot. Cool it down with this nifty little heatsink!
Simply remove the backing from the pre-applied thermal tape and stick it on top of the main processor chip.
- 14mm x 14mm (in 7mm height)
- Ideal for use with Raspberry Pi 3/4/zero
- Matte black finish
- Made from anodised aluminium
- Comes with pre-applied thermal tape for easy installation
- Anodised non-conductive coating
Note: At 7mm tall this heatsink may interfere with some HAT boards.
Used as MOSFET or voltage regulator Heat Sink
Note: The voltage regulator is not included.
Package Includes:
1 x Heat Sink
New design heatsink, greater contact area, improved cooling effect.
Specifications:
Color: Blue
Material: Aluminum
Function: Heat dissipation
Suitable for TMC2100/LV8729 stepper motor driver
Package Includes:
1 x Heatsink

Material: Aluminum
Colour: Sliver
Size:
- 14mm x 14mm x 5mm
- 14mm x 9mm x 5mm
- 9mm x 9mm x 5mm(2 units)
Packing list:
1 set Aluminum Heat Sinks

Please note: The case is not included
The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor.
Features
Specifications
Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
Fan speed control: Pulse width modulation control via user-selectable GPIO pin
Maximum airflow: 1.4CFM
Case Material: Clear PC
Fan size: 25mm x 25mm x 7mm
Compliance: For a full list of local and regional product approvals please visit:
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md
• Fits perfectly into the lid of the official Raspberry Pi 4 Case
• Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory and power-management IC
• 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor
Fitting Instructions

1 Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base.
2 Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid.
3 If you are also fitting the heatsink, remove the backing paper from the selfadhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position.
4 Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:
Lead Colour GPIO Pin
5v RED 4
Ground BLACK 6
GPIO 14 BLUE 8

5 Assemble the case.
Description:
Material: Aluminum & Heat Conductive Tape
Bottom Size: 14mm x 13mm
TopSize: 18mm x 13mm
Height: 6mm
Weight: 1.4g
Package Includes:
1 x heatsink
Note:
Heatsinks conduct electricity. When installing your heatsink make sure it isn't in contact with anything else. It could cause a short circuit and kill your board.
Voltage regulators and transistors can get a little hot sometimes! Most chips state that they can cope with high currents and voltage drops, but running these devices in high capacity situations can shorten their life. If you need to protect them from burning out, then add this nifty clip-on heat sink! No screws of thermal paste required, these heat sinks simply slide on to any TO-220 size chip.
These heat sinks have a thermal resistance of 28°C/W when connected to a TO-220 chip, which should let you dissipate around 4 Watts of power.
Technical Specification:
- Packages Cooled : TO-220
- Thermal Resistance : 28°C/W
- External Height : 20mm
- External Width : 19.7mm
- External Length : 8.1mm
- Mounting Type : Vertical / Horizontal clip-on
Type : Silicone fluid.
Physical From : Grease-like.
Size: 167mm x 35mm x 21mm.
Primary Use : Thermal coupling of electrical / electronic device to heat sinks.
Special Properties : High Conductivity ,Low Bleed and Stable at high temperature.
Package includes :
1 x 30g Heatsink Thermal Grease Syringe
Brand new and high quality.
New heat sink for solid state relay SSR
Aluminium alloy
Come with a aluminum heat sink provides long lasting usage, it will help dissipate the heat and protect your relay.
Solid State Relay ideal for automatic process control application, a must component for temperature controller and other machinery control system.
Specification:
Materail: Aluminium alloy.
Size:Roof:50mm x 60mm.Foot:80mm x 50mm.
Height:43mm.
Weight:96g
Compatible with:Designed specially for single phase solid state relay.
Color :Silver
Package includes:
1 x Solid state relay heat sink
This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, it is only compatible with your Raspberry Pi 4 Model B, does not support other versions. Also supports a dc 5v cooling fan.
Features:
ABS material.
Easy to install.
All ports and slots of the case match with Raspberry Pi 4 Computer Model B perfectly.
Supports a DC 5v extractor cooling fan.
Packing List:
1 x ABS Case for Raspberry Pi 4 Model B
1 x Cooling Fan 30mm x 30mm x 7mm
4 x Heat Sinks(new add on to this case)
Instructions:


Please Note: Raspberry Pi is not included. Picture is for illustration purpose only
Meet this super ICE Tower CPU Cooling Fan for Raspberry Pi! Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 48℃. What amazing! Best of all, this cooling fan supports the new Raspberry Pi 4 Model B. In our actual use, we found that Raspberry Pi 4 has a large amount of heat. with the help of this super fan, the powerful performance of the Raspberry Pi 4 will be fully released.
Please Note:
In the heat dissipation test mentioned above, the temperature was lowered from 80 ° C to 40 ° C. The test conditions are as follows: 1-Room temperature 25 ° C / 2- Apply silicone grease directly to the heat sink and processor chip / 3- Raspberry Pi 4 processor
If you use the thermal conductive tape included, you can reduce the temperature from 80 ° C to 48 ° C under the same conditions. It can be seen that the use of silicone grease is better. If you want to achieve the best heat dissipation, we recommend that you purchase silicone grease.
Video available at https://youtu.be/l5IFD2wq_gA
Features
- Support Raspberry Pi 4 Model B/ Raspberry Pi 3 Model B /Raspberry Pi 3 Model B+
- DC 5V Power in (Can be powered by the Raspberry Pi)
- Ice Tower Structure
- 5mm copper tube
- Super heat dissipation
- Rated power 0.4W @5V, 0.08A
Part List
- 2 x Steel Mounting Fixer (Fit for Raspberry Pi 3B+
- 2 x Steel Mounting Fixer (Fit for Raspberry Pi 4B)
- 1 x Ice tower CPU fan
- 4 x M2.5x6 copper columns
- 2 x M2x4 screws
- 4 x M2.5x4 screws
- 4 x Nuts
- 3 x Thermal Conductive Tape *3
- Screwdriver *1

Description:
Material: Aluminum & Heat Conductive Tape
Bottom Size: 14mm x 13mm
TopSize: 18mm x 13mm
Height: 6mm
Weight: 1.4g
Package Includes:
1 x heatsink
Note:
Heatsinks conduct electricity. When installing your heatsink make sure it isn't in contact with anything else. It could cause a short circuit and kill your board.
Specifications
Supported RPi: Raspberry Pi 4B/3B+/3B
Power supply: DC 5V input (can be powered from Raspberry Pi)
Structure: ICE Tower-style, 5mm copper tube super heat dissipation
Rated power: 0.4W @5V, 0.08A
Fan: Powerful RGB colorful LED fan (1x transparent fan, 1x spare black fan)

More efficient
Large area cooling fins and directly-contacted copper tube, super heat dissipation
reducing the temperature of the Raspberry Pi from 80℃ to 40℃ while overclocking

Colourful LED fan
Colour LED fan with automatic colour change, make it more dazzling and gorgeous
More silent
Rated power 0.4W @5V, 0.08A, elaborately tuned fan lower noise, higher performance
Easy to setup
Just a few screws and heatsink tape in a few steps


Outline Dimensions(mm)

Simple two-part design
easy to setup by just fixing the screws, airflow vents all over for better cooling

Cutouts for the ports

Outline Dimensions

Low noise, better cooling
Supported Pi | Raspberry Pi 4B/3B+/3B |
---|---|
Power supply | DC 5V input (can be powered from Raspberry Pi) |
structure | Low-profile, aluminum alloy heat-sinking bracket |
rated power | [email protected], 0.02A |
Fan | 3007 fan, 8000±10%RPM |
cooling the Raspberry Pi 4B (left) and Raspberry Pi 3B+/3B (right)
Dimensions
- 1