Search
Search Criteria
Products meeting the search criteria
MS Weather Station Anemometer for windspeed (MS anemometer)
MS Anemometer as used in the Raspberry Pi foundation weather station project to measure windspeed.
Hack this component to form part of your weather station.
View the project details here
And some more help here
Article specific to the anemometer only
Hack this component to form part of your weather station.
View the project details here
And some more help here
Article specific to the anemometer only
Machifit ER11 Chuck CNC 500W Spindle Motor with 52mm Clamp and Power Supply Speed Governor (500w spindle motor kit)
It only can be used with AC220V±10% 50/60Hz, not110V.
Here are the links of the CE Certification and the Environmental Certification:
CE Certification:
https://www.dropbox.com/s/x937yu696g449o2/CE%20Certification%20.pdf?dl=0
Environmental Certification:
https://www.dropbox.com/s/38ncgzktlsxlhvw/Environmental%20Certification%20.pdf?dl=0
Chuck size:
Nut Size:
Inner Diameter: 8.7mm
Height: 13mm
Hex Diameter: 17mm
Outer Diameter:19mm
The Usage of "Don't pipe":
Its function is to inhibit the switched source. If they are open, the source does not give tension.
If the short circuits, for example with a relay, the source generates the voltage to which it is regulated with the potentiometer.
There will be no problem in controlling the motor using these pins.
Here are the links of the CE Certification and the Environmental Certification:
CE Certification:
https://www.dropbox.com/s/x937yu696g449o2/CE%20Certification%20.pdf?dl=0
Environmental Certification:
https://www.dropbox.com/s/38ncgzktlsxlhvw/Environmental%20Certification%20.pdf?dl=0
Specifications:
Brand: Machifit
Brand: Machifit
| Dimensions | 140mm×110mm×48mm (L*W*H) |
| Input | AC220V±10% 50/60Hz |
| Spindle Motor | 500w |
| Spindle Speed | 3000-12000r/min |
| Motor Diameter | 52mm |
| Motor Length | 208mm |
| Operating Voltage | 100V DC |
| Current | 6A |
| Speed | Up to idle up to 15,000 rev / min |
| Torque | 5000G/CM |
| Insulation Resistance | > 2 megohms |
| Dielectric Strength | 400V |
| High precision spindle runout 0.01-0.03 | |
Chuck size:
Style: ER11
Material: High Grade 45 Carbon Steel
Total height: 18mm
Outer diameter(Max.): 11.5mm
Gripping Range: 3mm
Small diameter: 7.8mm
Small diameter: 7.8mm
Fits metric shank size(s): 3mm metric shank
Nut Size:
Inner Diameter: 8.7mm
Height: 13mm
Hex Diameter: 17mm
Outer Diameter:19mm
The Usage of "Don't pipe":
Its function is to inhibit the switched source. If they are open, the source does not give tension.
If the short circuits, for example with a relay, the source generates the voltage to which it is regulated with the potentiometer.
There will be no problem in controlling the motor using these pins.
Package Includes:
1 x 500W Spindle Motor
1 x Power Supply
1 x 52MM Mount Bracket
1 X ER11 Collect
4 x Screws
500W Spindle motor with chuck, power supply and speed controller for CNC.
12V-24V Pulse Width PWM DC Motor Speed Controller (pulse speedcontrol)
Description:
Control the speed of your DC motor.
Control the light of a lamp.
High efficiency, high torque, high power, high heat dissipation
With over current protection
The high quality COMBICON improve the stability of circuit
Specifications:
Input voltage: DC12V-24V
Sustained current: 3A, max. 6A (need to add a cooling fan for current)
PWM duty cycle: 0 -100%
PWM frequency: 500KHz
Material: plastic, metal
Size (L x W x H): 6 x 4.4 x 2.7cm / 2.36 x 1.73 x 1.06inch
Package includes:
1 x PWM motor regulator speed control switch
1 x External potentiometer with 200mm wire
Control the speed of your DC motor.
Control the light of a lamp.
High efficiency, high torque, high power, high heat dissipation
With over current protection
The high quality COMBICON improve the stability of circuit
Specifications:
Input voltage: DC12V-24V
Sustained current: 3A, max. 6A (need to add a cooling fan for current)
PWM duty cycle: 0 -100%
PWM frequency: 500KHz
Material: plastic, metal
Size (L x W x H): 6 x 4.4 x 2.7cm / 2.36 x 1.73 x 1.06inch
Package includes:
1 x PWM motor regulator speed control switch
1 x External potentiometer with 200mm wire
Speed Measuring Sensor Module (speed measure sensor)
Feature:
Uses improved groove optical coupling sensor, width 5mm.
It has an output state light, if output level is high, the lights are off. If output is low,light is on.
If sensor is covered,it will output a high level.
Working voltage of 3.3V to 5V.
Output: digital switch output (0 and 1).
Equipped with a fixed bolt hole, easily install.
Small board PCB size: 32 mm x 14 mm.
Use the LM393 wide voltage comparer.
Wiring specifications:
VCC Connect positive 3.3 to 5V power supply
GND Connect power negative
DO TTL switch signal output
AO Not used
Package includes:
1 x Speed Measuring Sensor Module
Uses improved groove optical coupling sensor, width 5mm.
It has an output state light, if output level is high, the lights are off. If output is low,light is on.
If sensor is covered,it will output a high level.
Working voltage of 3.3V to 5V.
Output: digital switch output (0 and 1).
Equipped with a fixed bolt hole, easily install.
Small board PCB size: 32 mm x 14 mm.
Use the LM393 wide voltage comparer.
Wiring specifications:
VCC Connect positive 3.3 to 5V power supply
GND Connect power negative
DO TTL switch signal output
AO Not used
Package includes:
1 x Speed Measuring Sensor Module
Used in motor speed detection, pulse count, position limit, etc.
9-50V 2000W 40A DC Motor Speed Control Module PWM HHO RC Controller (black 9-50V speed controller)
Features:
Power requirement: 9-50V
DCRated current: 40A(Maximum output current)
Frequency: 12000HZ
Control Motor Power: 0.01-2000W
Working voltage 12V: 480W (max)
Working voltage 24V: 960W (max)
Working voltage 36V: 1440W (max)
Working voltage 50V: 2000W (max)
Regulation range: 5-100%
PCB Size: Approx. 9 x 5.1cm / 3.55 x 2.01 inch
Case size: Approx. 10.5 x 5.5 x 4cm / 4.0 x 2.17 x 1.6 inch
Package included:
1 x DC Motor speed controller
Power requirement: 9-50V
DCRated current: 40A(Maximum output current)
Frequency: 12000HZ
Control Motor Power: 0.01-2000W
Working voltage 12V: 480W (max)
Working voltage 24V: 960W (max)
Working voltage 36V: 1440W (max)
Working voltage 50V: 2000W (max)
Regulation range: 5-100%
PCB Size: Approx. 9 x 5.1cm / 3.55 x 2.01 inch
Case size: Approx. 10.5 x 5.5 x 4cm / 4.0 x 2.17 x 1.6 inch
Package included:
1 x DC Motor speed controller
Avoidance tracking Smart Robot Car Chassis Kit Speed Encoder Battery Box 2WD Ultrasonic module For Arduino kit (Aduino robot car)
Please Note: Some drilling will be required. You might need to add a few standoffs and screws to build it the way you want it.
This complete robot car kit includes the arduino as well. Just add batteries and code. Great for beginners to learn how to code using sensors and motion on the Arduino boards
Pdf manual available at http://www.cs.columbia.edu/~sedwards/presentations/robot-car-instructions.pdf
Get more details at https://create.arduino.cc/projecthub/hda-robotics/project-1-2wd-obstacle-avoiding-robot-390ef8
Package Includes:
This complete robot car kit includes the arduino as well. Just add batteries and code. Great for beginners to learn how to code using sensors and motion on the Arduino boards
Pdf manual available at http://www.cs.columbia.edu/~sedwards/presentations/robot-car-instructions.pdf
Get more details at https://create.arduino.cc/projecthub/hda-robotics/project-1-2wd-obstacle-avoiding-robot-390ef8
Package Includes:
- Car chassis x 1
- Car Wheels x 2
- DC Gear Motor x 2
- 20 line gun code disk x 2
- Fasteners (high intensity black acrylic) x 4
- Caster x 1
- Four battery box x 1
- Quality Rocker Switch x 1
- Assembly drawing x 1
- Several screws and nuts
- V5 shield x 1
- UNO R3 x 1
- SG90 x 1
- FPV x 1
- L298N x 1
WS 3.5inch RPi LCD (C), 480x320, 125MHz High-Speed SPI (WS 3.5 LCD display)
External Dimensions
Features
- 480x320 hardware resolution
- Resistive touch control
- Supports any revision of Raspberry Pi (directly-pluggable)
- 125MHz High-Speed SPI signal transmission, clear & stable display effect
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie)
- Supports FBCP software driver as well, allows to config software resolution and set up dual-display
- Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+)
- High quality immersion gold surface plating
- Combined with the Raspberry Pi (refresh rate up to 50Hz), allows you to:
- Watch videos (multi formats like MP4)
- Play video games (RetroPie, take a bite)
- Take photos by touching (up to 17 camera modes)
- Use software keyboard (system interaction without keyboard/mouse)
Key Parameters
| LCD Type | TFT |
|---|---|
| LCD Interface | SPI |
| Touch Screen Type | Resistive |
| Touch Screen Controller | XPT2046 |
| Colors | 65536 |
| Backlight | LED |
| Resolution | 480x320 (Pixel) |
| Aspect Ratio | 8:5 |
| Power Consumption | TBD |
| Backlight Current | TBD |
| Operating Temp. (℃) | TBD |
Interface
| PIN NO. | SYMBOL | DESCRIPTION |
|---|---|---|
| 1, 17 | 3.3V | Power positive (3.3V power input) |
| 2, 4 | 5V | Power positive (5V power input) |
| 3, 5, 7, 8, 10, 12, 13, 15, 16 | NC | NC |
| 6, 9, 14, 20, 25 | GND | Ground |
| 11 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
| 18 | LCD_RS | Instruction/Data Register selection |
| 19 | LCD_SI / TP_SI | SPI data input of LCD/Touch Panel |
| 21 | TP_SO | SPI data output of Touch Panel |
| 22 | RST | Reset |
| 23 | LCD_SCK / TP_SCK | SPI clock of LCD/Touch Panel |
| 24 | LCD_CS | LCD chip selection, low active |
| 26 | TP_CS | Touch Panel chip selection, low active |
External Dimensions
Development Resources
USB To USB Isolator 12Mbps Speed ADUM4160/ADUM316 (usb isolator)
Compatible with USB 2.0, it provides full isolation at 12 Mbps data rates. With isolation of 2500V, it has no external power supply, no driver required.
Drive-free, more convenient to use.
Support USB full speed 12Mbps does not support pure high speed equipment.
Support USB control transfer, batch transfer, interrupt transfer, sync/isochronous transfer.
Specifications:
ADUM3160 isolation voltage: 2500V
Power module isolation voltage: 1500V
Power supply: taken from the computer host USB port
Operating environment: -40 °C to 85 °C
Dimensions: 15mm x 25mm x 66mm
Package includes:
1 x USB To USB Isolator
- 1