Search
Search Criteria
Products meeting the search criteria
The display will technically work with the Model A and Model B boards (connecting it to the DSI port on the Pi board), however the mounting holes on the back of the display will only line up with the newer board design (A , B , Pi2, Pi3 and Pi4)
Description:
The eagerly awaited 7" Official Raspberry Pi Touchscreen Display is here! Boasting a neat 800×480 display @ 60fps resolution, and 10 point capacitive touchscreen, this 7" screen for the Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.
The 800x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard are available on the latest Raspbian OS for full functionality without a physical keyboard or mouse.
- Turn your Raspberry Pi into a touchscreen tablet, infotainment system, or standalone device.
- Truly Interactive - the latest software drivers will support a virtual ‘on screen’ keyboard, so there is no need to plug in a keyboard and mouse.
- Make your own ‘Internet of Things’ (IoT) devices including a visual display. Simply connect your Raspberry Pi, develop a Python script to interact with the display, and you’re ready to create your own home automation devices with touchscreen capability.
- A range of educational software and programs available on the Raspberry Pi will be touch enabled, making learning and programming easier on the Raspberry Pi.
- Raspberry Pi mounting points on the back
Technical Specification:
- 7” Touchscreen Display.
- Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
- Viewable screen size: 155mm x 86mm
- Screen Resolution 800 x 480 pixels
- 10 finger capacitive touch.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
- Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
N.B. Will require the latest version of Raspbian OS to operate correctly.
Kit Contents:
- 7” Touchscreen Display
- Adapter Board
- DSI Ribbon cable
- 4 x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
- 4 x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)
Please Note. The Raspberry Pi Board and accessories are not included in this kit.
Installation instructions can be found at:
http://www.element14.com/community/docs/DOC-78156?ICID=rpimain-touchscreen-7inban#installI
Description:
It's easy to set up, features a great resolution, comes complete with a black acrylic stand, and has touch by default!
Recent upgrades:
If you were used to seeing the Self Test at power on, this has now been removed. However if you remove the jumper located on the controller board you can re-enable this feature.
This device uses the Pi's HDMI output for display, and the Pi's USB port for touch control. Assembly of the Waveshare 10.1" screen is easy, just follow this simple guide here.
Please Note. This device does require some simple set up. You will need a UK to EU power adapter.
The LCD Screen Features:
- 10.1inch HDMI LCD (B)
- 1280x800 Resolution
- UK 5V 2A Power Supply Included
- Capacitive touch control
- Supports Raspberry Pi, Ubuntu, Windows 10 IoT driver free
- Can also be used as a computer monitor, supports Windows 10/8.1/8/7/XP etc.
- Supports BB Black, comes with Angstrom image
- HDMI interface for displaying, USB interface for touch control
- Input interfaces: HDMI
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- Firmware is upgradable to support more new features (continually updated)
The Case Features:
- Material : High quality black and clear Acrylic
- Comes with bottom holder, 45° tilt angle
- Features mounting holes for Raspberry Pi 3B/2B/B /A /B, and BB Black
Troubleshooting:
For the Windows OS on PC, the resolution of the LCD is automatically identified. Hence, you do not need to make the relative settings. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work.
If the display in not working correctly or not displaying at all, you may need to edit setting in the config file.
sudo nano /boot/config.txt
And add the following to the end of the file:
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 800 60 6 0 0 0
hdmi_drive=1
If this does not ressolve the problem then use the following instead:
max_usb_current=1
hdmi_group=2
hdmi_mode=27
hdmi_drive=1
What's in the box?:
1 x HDMI 10.1" Touch Screen
1 x Acrylic panels
1 x HDMI cable
Resources:
User Manual
Quick Assembly Guide
This product contains only the display. Raspberry Pi, case and cables are shown for illustration purposes only and not included.
Description:
The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A or B and fits into our case quite nicely.
It's designed to plug directly onto the Raspberry Pi 2 or Raspberry Pi 1 Model A or B . While not specifically designed for Pi Model A or B,you can use it with A/B if you solder in an extra-tall 2x13 header (not included) instead of the included 2x20 header.
This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.
Comes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header.
Technical Details
- Board Dimensions: 65mm x 57mm x 6mm / 2.6" x 2.2" x 0.2"
- Screen Dimensions: 55mm x 40mm / 2.2" x 1.6"
Tutorials
With this 3 in 1 Function: Wireless Keyboard Mouse Touchpad taking your Raspberry Pi on the road has never been this easy. Great for use as a remote with your media center.
Specifications:
Model | T16 |
Color | Black |
Size | 14.9*10.7*1.8cm(L*W*H) |
Connection Mode | 2.4GHZ Technology |
Interface | USB 2.0 |
Remote Control Distance | 25m |
Working Voltage | 3V |
Working Current | 50mA |
Battery | Rechargeable Li Battery |
Backlight Colors | Blue |
Plug and Play | Support |
Operating System | Android/Windows Systems (Windows XP/Windows Vista, Windows CE, Windows 7, Windows 8) |
Compatible Devices | Android TV Box, Google TV Box, Xbox 360, Smart TV, Windows PC, HTPC |
Package includes:
you can turn off the LED and light from any point in time.
To use this feature, simply link your eWeLink application to Amazon Alexa. With a few steps you can tell Alexa or turn off lights and turn on all devices.
Remote ON/OFF
Scheduled/countdown timing
One-key sharing
Group/scene management
Specifications:
Terminal platform: Android , IOS
Connection: wifi
Control distance: Infinity (in 2G / 3G / 4G / WIFI network)
Standard: 86 type EU / 120 type US
Wireless power consumption: <0.3w
System: support IOS6.0 / Android2.3 and above
Input Voltage: AC90 ~ 250V, 50 / 60hz
Max. Current: 2A
Rated power: 400W
Wifi Frequency: 2.4GHz 802.11b / g / h
Power supply: zero fire power supply
Shell material: flame retardant ABS
Panel material: tempered glass
Color: White
Size:
120 type: 120mm x 78mm x 41mm
Package Includes:
1 x Touch Wifi Switch Module
The WiFi smart switches with 1-3 gangs of T2(EU & UK &US) available in white. Additionally T1, T2 and T3 support 433MHz remote controller to control.
All switches can be controlled remotely using your phone, and devices connected with switches can work independently. Works with Amazon Alexa and Google Assistant which let you turn on or off your appliances with a voice command, perfect for those need to handle much housework simultaneously. Features sensitive touch buttons that are attached on the simple and stylish switches to ensure a modern and nice decoration on any wall surface. A slight tap for easier control. If worry your monthly electricity bill is overwhelmed by power-hungry appliances, or wanna turn on your coffee maker while you’re sitting on the sofa, the time schedule is a good choice. Set a time for devices and the switches will help you turn on or off them automatically. Tailor smart scene for your appliances. simply set an event to happen to trigger one SONOFF device or groups of devices with a tap on your phone. Your devices will not run because of an abnormal WiFi network, the LAN control hence is designed to make sure they can work normally.
Compatible with IFTTT function, the switches can communicate with a slew of devices and services, to trigger them on or off. There are several complicated steps when we start to access a smart home, to pair, enter account and password, name and so on. The share control provides you a quick way to allow you and your family to control devices together. You’re not sure whether turning off the heater when leaving home, just take your phone out and open the eWeLink app to check the real-time device status.
Manual:
Compare TX Models | ||||
Type | T0 | T1 | T2 | T3 |
433MHz | No | Yes | Yes | Yes |
Color | White | White | White | Black |
EU | Yes | Yes | Yes | Yes |
UK | Yes | Yes | Yes | Yes |
US | Yes | No | Yes | Yes |
All US series with a border
Features:
Model: T2
Standard: US/UK/EU
Gang: 1 gang/2 gang/3 gang
Color: White
Input: 1C: AC 100-240V 50/60Hz 2A Max
2C: AC 100-240V 50/60Hz 4A Max
3C: AC 100-240V 50/60Hz 3A Max
Output: 1C: AC 100-240V 50/60Hz 2A Max
2C: AC 100-240V 50/60Hz 2A/Gand 4A/Total
3C: AC 100-240V 50/60Hz 1A/Gang 3A/Total
LED load: 1C/2C: 150W/110V(per channel)
300W/220V(per channel)
3C: 60W/110V(per channel)
100W/220V(per channel)
Operating systems: Android_4.1 or higher&iOS 9.0 or higher
Enclosure Material: PC V0 toughened glass panel
Wireless Standard: IEEE 802.11 b/g/n 2.4G
RF: 433.92MHz
EU/UK Size: 86*86*35mm
US Size: 120*74*38mm
Specifications:
- Remotely control devices through a phone
- Turn on/off devices with Amazon Alexa and Google Assistant
- Touch control buttons for convenient operation
- Set a particular time to turn on/off devices
- Customize one or groups of SONOFF devices to turn on/off with a simple tap
- Allow you to manage devices when there is no WiFi network in your space
- Control the device with your family together via device sharing
- Sync the real-time device status to your phone
- IFTTT service triggers a bunch of actions
- Can be managed by the 433MHz remote controller (not included)
Package includes:
1 x SONOFF T2 Smart Switch
- 1024×600 high resolution
- Resistive touch control
- Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
- Backlight can be turned off to lower power consumption
Interface:
PIN NO. | SYMBOL | DESCRIPTION |
---|---|---|
1, 17 | 3.3V | Power positive (3.3V power input) |
2, 4 | 5V | Power positive (5V power input) |
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 | NC | NC |
6, 9, 14, 20, 25 | GND | Ground |
19 | TP_SI | SPI data input of Touch Panel |
21 | TP_SO | SPI data output of Touch Panel |
22 | TP_IRQ | Touch Panel interrupt, low level while the Touch Panel detects touching |
23 | TP_SCK | SPI clock of Touch Panel |
26 | TP_CS | Touch Panel chip selection, low active |
External Dimensions

Development Resources
13.3inch IPS screen, 1920x1080 high resolution. Toughened class cover. Supports Raspberry Pi and can also be used as a computer monitor.
Features
- 13.3inch IPS screen,1920x1080 high resolution
- Toughened glass capacitive touch panel, 6H hardness
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian, Ubuntu, WIN10 IOT, single touch, and driver free
- When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
- Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.
- 3.5mm audio jack, supports HDMI audio output
- Embedded ferrite Hi-Fi speaker
- Also supports VGA input (specific cable is required and should be purchased separately)
- 75x75mm spacing mounting holes (M4 screw hole) for general wall mount
- Comes with 75° tilt angle stand
External Dimension

Development Resources
Wiki : www.waveshare.com/wiki/13.3inch_HDMI_LCD_(H)_(with_case)
Description:
Professional Weather Station with PC interface at 433Hz. Featuring touch panel and stylus. The outdoor transmitter is powered by solar
Note:
Commonly the radio communication between receiver and transmitter in the open field can reach a distance of up to 330 feet providing that there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc.
Radio interferences such as PC screens, radios or TV sets can, in bad cases, entirely cut off radio communication. Please take this into consideration when choosing standing or mounting locations.
Features:
1) Touch screen panel (touch by stylus)
2) USB port for easy connection to your PC
3) All the weather data from the base station and weather history data with user adjustable measuring intervals can be recorded and uploaded to your PC
4) Free PC software for transfer weather data to PC (EasyWeather)(EasyWeatherPlus is not compatible)
5) Rainfall data (inches or millimeters): 1-hour, 24-hour,one week, one month and total since last reset.
6) Wind chill and Dew point temperature display ( °F or °C)
7)Records min. and max. wind chill and Dew point with time and date stamp
8) Wind speed (mph, m/s, km/h, knots, Beaufort)
9) Wind direction display with LCD compass
10) Weather forecast tendency arrow
11) Weather alarm modes for: a) Temperature b) Humidity c) Wind chill d) Dew point e) Rainfall f) Wind speed g) Air pressure h) Storm warning
12) Forecast icons based on changing barometric pressure
13) Barometric pressure (inHg or hPa) with 0.1 hPa resolution
14) Wireless outdoor and indoor humidity (% RH)
15) Records min. and max. humidity with time and date stamp
16) Wireless outdoor and indoor temperature (°F or °C)
17) Records min. and max. temperature with time and date stamp
18) 12 or 24-hour time display
19) Perpetual calendar
20) Time zone setting
21) Time alarm
22) High light LED backlight
23) Wall hanging or free standing
24) Synchronized instant reception
25) Low power consumption (over 2 years battery life for transmitter)
26) RCC function (not included on this model)
27) solar powered transmitter (outdoor unit)
Specifications:
1) Outdoor temperature range: -40.0 °C to 65.0 °C (-40 °F to 149 °F)
2) Indoor temperature range: 0 °C to 50.0 °C (32 °F to 122 °F)
3) Humidity range: 10% to 99% (1% resolution)
4) Rain volume display: 0 - 9999mm (show OFL if outside range)
Resolution : 0.3mm (if rain volume < 1000mm) ,1mm (if rain volume > 1000mm)
5) Wind speed: 0~100mph (show OFL if outside range)
6) Measuring range air pressure: 27.13inHg - 31.89inHgResolution : 0.01inHg
7) Alarm duration : 120 sec
8) Transmission range up to 100m (330 feet)
9) Power consumption:
a) Receiver: 2 x AA alkaline batteries (not included) b) Sensor: 2 x AA rechargeable batteries (not included)
10) Transmission frequency: 433MHz
1) Receiver
2) Four outdoor sensors:
- thermo hydro transmitter,
- wind speed sensor,
- wind direction sensor and
- rain sensor
Resources :
User Manual : MS Professional Weather Station
Easy Weather Download : https://easyweather.software.informer.com/7.8/
- 7inch IPS screen, 1024x600 hardware resolution
- Capacitive touch control
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
- When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
- Backlight can be turned off to lower power consumption
Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:
Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
BB Black: HDMI cable
Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)
FAQ- Why the LCD doesn't work with my Raspbian?
- To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly. - Why the LCD still doesn't work with the Waveshare provided image?
- Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. - Which power supply should I use?
- It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.
For more info, please check the wiki page.
Protect your new 7" Raspberry Pi Touchscreen with this lovely little display frame from Pimoroni! Designed with a slimline profile, it's perfect for keeping your Raspberry Pi screen upright, and at an ideal viewing angle!
Please note: Raspberry Pi Touchscreen and Raspberry Pi are not included
Pimoroni's Touchscreen Display Frame Features:
- Slim profile made up of only 3 layers keeps the screen protected
- 2 Legs hold the screen at an ideal viewing angle
- Provides support and protection to the back of the screen
- All Raspberry Pi Ports accessible
- Leaves touchscreen free for touching
- No tools required for assembly
1 x touchscreen Display Frame
Assembly screws
Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad.
The screen looks much nicer, with a black bezel and glass overlay.
This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A , B ! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath.
The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button.
Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.
Raspberry Pi computer and enclosure not included! As of July 22nd, 2015 this display comes fully assembled with tactile switches too
TECHNICAL DETAILS
- Screen Dimensions: 50mm x 69mm x 4mm / 2" x 2.7" x 0.16"
- PCB Dimensions: 56mm x 85mm x 11mm / 2.2" x 3.3" x 0.4"
- Weight: 47g
Datasheets, EagleCAD PCB files, Fritzing object and more in the tutorial!
Isn't it coooool to play your favorite song using the BBC micro:bit? Just plug it into this little piano, and enjoy.
Features- micro:bit edge connector, directly pluggable
- Buzzer to play music
- Onboard capacitive touch controller, 13x touch keys through I2C interface
- 4x RGB LEDs, controlled by only one signal pin
- Breakout module control pins, micro:bit SPI pins, and some of the GPIO pins, easy expansion
- Comes with development resources (micro:bit graphical demo/python code/user manual, etc.)
- Touch controller: TTP229
- LED: WS2812B
- LED color depth: 16777216 colors
- Dimension: 85mm x 56mm
- Operating voltage: 3.3V
SYMBOL | DESCRIPTION |
---|---|
VCC | Power (3.3V input) |
GND | Ground |
P0 | Buzzer control pin, related to mcro:bit P0 |
P1 | LED control pin, related to mcro:bit P1 |
SCL | Touch keys control pin, I2C clock |
SDA | Touch keys control pin, I2C data |

- Supports any revision of Raspberry Pi (directly-pluggable)
- Provides your Pi with 16 touch keys
- Features TONTEK TonTouch touch pad detector IC TTP229-LSF, supports up to 16 keys with adjustable sensitivity and built-in LDO
- The system re-calibrates automatically when all keys are not detected touch more than about 4 seconds
- Interface : I2C
- Keys : 16
- Sampling rate : 8Hz
- Human Body Mode : 6KV
- Operating voltage : 2.4V-5.5V
- Operating temperature : -40℃ to 85℃
- Storage temperature : -50℃ to 125℃
- Dimensions : 8.5CM × 5.6CM
- After power-on have about 0.5sec stable-time. During the time do not touch the key pad, and all functions are disabled
- VCC : Power supply (2.4V-5.5V)
- GND : Ground
- SDA : I2C SDA
- SCL : I2C SCL

Downloads/Development resources:
schematic, demo code, datasheets, etc.
Download: www.waveshare.com/wiki/RPi_Touch_Keypad


Device & System Support

Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports all versions of Raspberry Pi

Connection Examples
Raspberry Pi 3/4


Raspberry Pi ZERO W/WH

Jestson Nano

Mini PC

Appearance and Dimensions

Resources & Services
Developed for Raspberry Pi 4 B.
3.5-inch HDMI LCD screen with touch function support systems.
Support of input resolution of 3.5 "display monitors from 480 x 320 to 1920 x 1080 (3: 2 ratio is better).
Supports HDMI audio input, stereo 3.5mm audio output.
Plug and play, easy and convenient to use.
LCD screen contains a protective cover.
ABS case: Use the top cover if you are not installing the 3.5-inch display.
Specifications:
Type: 3.5 Inch screen set for Raspberry Pi 4 B
LCD Type: TFT transmissive
SPI Interface: 32 MHz
Support Resolution: 480 x 320
Backlight: 6 white LEDs
Tap Chip: xpt2046
The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display
Package includes:
1 x 3.5 Inch LCD Touch Screen
1 x ABS Case for Raspberry Pi 4 B
1 x Touch Pen
Works with the Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B /3B with Aluminum Alloy Bracket
Not included



Connection Examples
Working with Raspberry Pi 4
Working with Raspberry Pi Zero W
IPS Panel
Touch Control
Appearance and Dimensions
(* Please note that this 7inch Display is only compatible with the Raspberry Pi4 *)

Device & System Support
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free

Touch Control

up to 5-points touch, depending on the operating system.

Appearance and Dimensions

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?)
Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to write on the pads to label their function.
It uses the CAP1166 capacitive touch and LED driver chip. The LEDs have been under-mounted and shine through exposed sections of the PCB to give a pleasing yellow-green glow and a completely smooth top surface!
Use Touch pHAT as a controller for your robot, a controller for your Mote lights, a tiny drum machine, or use it to build a simple game where you have to taps the buttons to repeat the sequence of lights that just flashed.
Features
- Six capacitive touch buttons
- Six bright white under-mounted LEDs
- Microchip CAP1166 capacitive touch and LED driver chip
- Compatible with Raspberry Pi 3, 2, B , A , Zero, Zero W
- Python library
- Female header requires soldering
Software
Our handy one-line installer will install the Touch pHAT Python library for you. We've included a couple of examples too, to show off what you can do with Touch pHAT.
1024×600, 7-inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. Toughened glass capacitive touch panel, 6H hardness. It supports Raspberry Pi and can also be used as a computer monitor.
Features
- 7inch IPS screen, 1024x600 hardware resolution, configurable by software. (up to 1920x1080)
- Toughened glass capacitive touch panel, 6H hardness. (case version only)
- Supports popular mini PC such as Raspberry Pi, BB Black, Banana Pi.
- Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, driver free.
- Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
- It has a 3.5mm audio jack and supports HDMI audio output
- Supports VGA input (specific cable is required and should be purchase separately)
- High-quality PC case, optional tilt angle: 30°/50°.
What's in the box ?
- 7inch HDMI LCD (H) x1
- HDMI cable x1
- HDMI to Micro HDMI Adapter x1
- USB type A plug to micro B plug cable x1
- RPi screws pack (4pcs) x 1
- Quick start sheet x1
Resources : ( Calibration for touch, Working with Windows, Raspberry Pi , Jetson Nano etc.)
Wiki: www.waveshare.com/wiki/7inch_HDMI_LCD_(H)






