Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
R17.90  Inc VAT
R819.90  Inc VAT
R840.89
PWM 30A Dual USB Solar Panel Battery Regulator Charge Controller 12/24V LCD (30A PWM solar charge controller)
Description:

Solar panels are a clean and ecological source of electricity.

Obtaining this energy, however, poses a number of challenges for device designers. The amount of energy produced by the panel is strongly dependent on the angle of incidence and the intensity of the light falling on the surface of the cells. This, in turn, leads to unstable power supply parameters at the output, as even shading a small part of the panel may drastically reduce the efficiency.


The optimal solution to the above-mentioned problems is the use of a set consisting of a solar panel, a battery and a charge controller. Such a set allows to ensure constant parameters of power supply to receivers, and also to store energy produced excessively for later use.


The 30A-PWM-LCD solar charge controller allows you to connect panels connected to each other both in series and in parallel - remembering not to exceed the permissible values of current and voltage at the input of the device. Due to the operating characteristics of the PWM controllers, it should be remembered that when the panels are connected in series, the rated voltage at the output for charging the battery is 24V.

PWM stands for Pulse Width Modulation. PWM charge control devices can be explained as an electrical switch between batteries. The switch can be quickly switch on and switch off. Therefore, desired voltage can be obtained to charge the batteries. The charge current will be slowly decreased as the batteries charged.

Specifications:
 
Rated Voltage: 12V/24V(Auto recognition)
Rated Current: 30A
Charging Mode: PWM
USB output: 5V 2A
Self-consume: <10mA
Operating Temperature: -35 ~ 60 °C
Storage Temperature: -35 ~ 60 °C

Typical usage example:

 
Package Includes:
 
1 x 30A Solar Charge Controller
R399.90  Inc VAT
Mini USB 2.0 MicroSD Card Reader (Mini uSD Card Reader)
Mini USB 2.0 Micro SD Card Reader


Description:


This mini USB 2.0 MicroSD card reader is super-small but also super-handy! It can be used to write Raspberry Pi OS to your MicroSD cards, move files from your projects to a PC or perform other MicroSD card data transfer jobs.

You can even use it (with a MicroSD card) as USB file storage for your Raspberry Pi!

Your MicroSD card pops inside the metal USB section of the USB adapter (see images) and then pushes into your PC for reading. It also comes with a little keychain, because are you really a proper maker if you don't have USB 'things' on your keys?!



Specifications:

  • USB 2.0
  • Accepts MicroSD cards only
  • Internal MicroSD mounting
  • Small size
  • Comes with keychain
  • Colour: Black

What's in the box ?

1 x Mini usb Micro Sd 






 

R69.90  Inc VAT
High precision Capacitive Fingerprint Reader (B) UART/USB dual ports (WS USB/UART finger print sensor)
Description:

The Capacitive Fingerprint Reader (B) is a fast and stable capacitive fingerprint module specialized for secondary development, suits integration applications.

By incorporating high performance Cortex core processor, high security commercial fingerprint algorithm, and advanced semiconductor fingerprint sensor, this module is designed as a intelligent integration module with functions including fingerprint enrolling, image processing, template generating and storing, fingerprint matching and searching, etc.

  • Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure/calculation
  • Commercial fingerprinting algorithm, stable performance, fast identification
  • Sensitive detection, just touch the collecting window lightly, without pressing
  • Allows to freely input/output fingerprint images, fingerprint feature file and other fingerprinting actions
  • Dual communication, UART or USB
  • Comes with rich development resources (related command documents, tools, and examples for Raspberry Pi/Arduino/STM32)
Specifications:

parametervalue
SensorSemiconductor (capacitive)
Module dimension34 × 28.5mm
Sensor dimension33.4 × 20.4mm
ImageDPI 508
Image resolution208 × 288
Greyscale256 (8-bit)
Sensing area14.6 × 10.6mm
Fingerprint capacity3000
Security level1-5 configurable, 3 by default
the higher value, the lower FAR (False Acceptance Rate), yet the higher FRR (False Rejection Rate)
Encryption key64-bit encryption
Image collecting rate20fps
Matching time0.5s
Dynamic current<40mA
Operating voltage3.3-5V
Communication portUART or USB
ESDSD IEC 61000-4-2 LEVEL 4 positive/negative 15KV air discharge
Baudrateconfigurable: 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600bps
115200bps by default

What's in the box?

1 x UART/USB finger print sensor

Outline dimensions



R899.90  Inc VAT
USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi Series (USB3.2 Gen1/Ethernet HUB )
Description:

USB 3.2 Gen1 And Gigabit Ethernet HUB HAT For Raspberry Pi, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free

This is a driver-free 3 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, also with a Gigabit Ethernet port, provides more USB/network capability to your Pi, make it easy to connect more USB devices and network devices.

The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.


Specifications:

  • 3x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1
  • 1x Gigabit Ethernet port, 1000M/100M/10M compatible
  • Onboard external USB-C 5V DC power port, ensures more stable power supply
  • 1x power indicator and 3x USB port indicators, easy to check the operating status
  • Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
  • Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well
  • Comes with development resources and manual

DATA RATECURRENT NAME
                    5 Gbps        USB 3.2 Gen 1


What's in the box ?

  1.   USB 3.2 Gen1 HUB Gigabit ETH HAT x1
  2.   USB 3.0 Adapter x1
  3.   USB 3.0 dual plug cable ~60cm x1
  4.   RPi screws pack (2PCS) x1


Resources :

  -   Wiki USB_3.2_Gen1_HUB_Gigabit_ETH_HAT




























R489.90  Inc VAT
Sata To USB 3.0 Adapter Support 2.5Inch External SSD HDD Hard Drive 22 Pin Sata III A25 2.0 (Sata to USB3 cable)
Please Note: Only for use with 2.5inch notebook HDD and SSD, not for use with 3.5 inch desktop HDD

Description:

Comply with serial ATA2.0 standards.
Compatible with USB port (1.0,1.1 &2.0) & SATA Hard disk (1.5 GB/S & 3 GB/s).
Added USB2.0 independent power supply interface, support 2.5 "high-capacity memory driver.
Compatible with Windows 7 (32-bit/64-bit)/Vista (32-bit/64-bit)/XP (32-bit/64-bit)/server 2003 & 2008 (32-bit/64-bit) system A

Specifications:

1. Adapter SATA III USB 3.0 Cable External Hard Drive USB to Serial ATA 22pin Converter Hard Disk 6 Gbps for 2.5" HDD/SSD.
2. This USB 3.0 to SATA Converter Cable connects any standard 2.5 inch SATA Hard Drive or Solid State Drive (SSD) to a computer through USB 3.0 ports. It's a ideal for you to backup files or upgrade your notebook hard driver.
3. SATA 3 specification Support speed up to 6Gbps;
4. Easy and quick access to external storage;
5. LED activity indicator;
6. Fully compatible with USB 3.0 and backwards compatible with USB 2.0/1.1;
7. Plug and play,hot-swapping;
8. Support Windows 98/2000/XP/Vista/7/8, Mac OS X.
 
What's in the box?

1 x  Sata Cable for 2.5" SSD/HDD
R119.90  Inc VAT
Voice Control Wireless Air Mouse Keyboard 2.4G RF Gyro Sensor Smart Remote Control for X96 H96 Android TV Box Mini PC vs G10 (remote/keyboard control)
Features:

1. High-quality material: Made of high-quality materials, safe and durable.
2. The button is sensitive: sensitive button, easy to operate.
3. More stable and smoother: It has strong stability, prevents code loss from the receiver, ensures stable data transmission, and is smoother to use.
4. Two in one: the perfect combination of mouse and keyboard.
5. Wide range of applications: suitable for computers, Android players, set-top boxes, smart TVs, smart projectors and other smart devices with operating systems, remote control.

Description:

1. USB interface: USB keyboard device, plug and play, no need to install drivers.
2. Applicable to computer, Android player, set-top box, smart TV, smart projector and other intelligent devices with operating system, remote control.

Specifications:

Connect with computer: wireless
Interface: USB
Operating distance: 10 (m)
Material: ABS
Colour: Black
Type: Voice control
Size: 173*53*18mm

What's in the box?

1 x smart remote control
R269.90  Inc VAT
6W Stereo USB Power and Signal Speaker-Black (USB stereo black)
Description:

This small Computer Speaker is USB-powered and USB communicated, just plug and play. No extra 3.5mm Audio Jack is needed. It is very easy to use. For a Mini Speaker, the sound is loud and beautiful. This USB Desktop Speaker will bring you good audio for you to listen to music, watch films, or play games. The small USB Speaker is energy-saving and environmentally-friendly. This mini Portable Speaker is specially designed for desktop, laptop, notebook, tablet PC, and even Raspberry Pi boards and Jetson.



As the new Raspberry Pi 400 keyboard computer does not come with a 3.5mm Audio Barrel for speaker output, this USB powered, and signal is the perfect speaker for it. And we have tested it with Raspberry Pi 400, it works like expected. No driver is needed, plug and use!



Note: If you're using the speaker with your Raspberry Pi, be sure to change the audio device to USB2.0 Device and change the output to Digital Stereo Output. Else, you will not be able to control the volume.


Features and specifications:

  • They are small and compact, so they can be brought anywhere.
  • Powered by a single USB cable, have NO volume control knob, easy to use.
  • Anti-interference and stereo sound.
  • Crystal-clear treble.
  • Space-saving design, they can be conveniently placed next to your PC monitors without compromising on valuable desk space.
  • Built-in 2 speakers, balance and enhance the sound of your laptop, notebook, computer, PC, tablets, good for work, music, movies, games, etc.
  • Acoustic quality stereo sound, let your room filled with music, movies, or computer games.
  • No driver is needed for Windows, Linux and macOS, just plug and play!
  • Great for
    • Enhance any media experience while at home, office, kitchen, basement, or on the go.
    • Upgrade to your computer's weakened or faint internal speakers. Perfect USB Speakers for Windows PCs, Desktop Computer, Laptop.
    • Daily listening, static listening at home or office.
  • Material: Plastic
  • Output Power: 3W*2
  • Channel: 2.0
  • Frequency Response Range: 25Hz-20KHz
  • Separation: ≥40dB
  • Power Supply: USB 5V
  • SNR: ≥80dB
  • Voltage: 5V
  • Connectivity: USB
  • Number of speakers: 2
  • USB Cable Length: 47 inches
  • Connection radius: direct connection

What's in the box?

  • 1 x 6W Stereo USB Power and Signal Speaker-Black
R259.90  Inc VAT
Kenton 2A USB A to Type C Fast Charging Data Cable black (Type C cable black 2A)

Description:

These cables are fast charging because of the quality of the cable. But more importantly the length and thickness. If these are properly adjusted to maintain low resistance then we get most out of that cable.

Specifications:

Brand: Kenton
Colour: Black
Cable Length: 1m
Cable Plug: USB Type C to USB A
 
Technical Parameters:
Wire Core: Copper
Wire Material: PVC
Cable Current: 5V 2A max

Package  Includes:
1 x 2A Type C USB Fast Charging Data Cable
R99.90  Inc VAT
FT232 USB To UART (TTL) Communication Module USB-C Connector (WS FT232 UART USB C)
FT232 USB-C To UART Module, adopts FT232RL, compatible with 3.3V/5V logic level 


Features at a glance

  •     Original FT232RL onboard
  •     Supports Mac OS, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
  •     3x VCCIO power mode via jumper setting:
  •         VCCIO - 5V: 5V output
  •         VCCIO - 3.3V: 3.3V output
  •         open the jumper: powered from target board (3.3V-5V)
  •     3x LED indicators: TXD, RXD, PWR
  •     Pins accessible on pinheaders: TXD, RXD, RTS#, CTS#
  •     Other pins are accessible on drilled holes, easily connected to user application system (the pin pitch is compatible with universal prototype board)
FT232 solution



Hardware connection
  • VCCIO ↔ 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
  • GND ↔ GND
  • TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
  • RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
  • RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
  • CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
CAUTION: the module is compatible with TTL level ONLY, to avoiding any damage, please DON'T direct connect it to RS232 circuit.


Outline Dimensions



Wiki: FT232_USB_UART_Board_(Type_C)

What's in the box?

1 x FT232 USB UART board
R179.90  Inc VAT
PoE Ethernet / USB HUB BOX for Raspberry Pi Zero Series(Zero not included), 3x USB 2.0, 802.3af-Compliant (WS zero POE hub case kit)
Description:

PoE Ethernet / USB HUB BOX for Zero. Dull polish surface, well designed, nice & dust-proof. PoE 802.3af-compliant Ethernet Port | 3x USB 2.0 Ports.


Features at a glance

The PoE-ETH-USB-HUB-BOX is a HUB kit with PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.

  •     Designed for Raspberry Pi Zero, compatible with Zero series boards
  •     Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
  •     PoE (Power over Ethernet) feature, 802.3af-compliant
  •     Fully isolated SMPS (Switch Mode Power Supply)
  •     3x extended USB ports, compatible with USB 2.0 / 1.1
  •     Angle rounded design, smooth hand feeling, "simple snap" case lid
  •     Quality ABS material, dull polish surface, anti-fingerprint
  •     Comes with two different lids, changing as you like

Specifications

PoE power input:     37V ~ 57V DC in
Power output:     5V 2.5A DC out
Network standard:     IEEE 802.3af-compliant PoE
Dimensions:     72.80 × 37.50 × 45.80 mm


Compatible with Raspberry Pi Zero series

specialized pogo pin connection, dedicated cut-outs for Zero series, plug-and-play 




3x extended USB 2.0 ports

USB1 ~ USB3, compatible with USB 2.0 / 1.1



Extended Ethernet port

USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation



Two different lids, change as you like

"simple snap" design, easy to change, allows attaching other Zero HATs



Application example



Outline dimensions





Resources:

R539.90  Inc VAT
USB A male to USB micro B male 1m (USB cable micro 1m)
    Description:

    Great for data transfer or powering your Raspberry Pi Zero
    Specifications:

    • Can be used for data transmission
    • USB Type A to micro B cable
    • USB 2.0
    • Tested for Compatibility with the Raspberry Pi
    • 1m Long
    • Colour: Black
    • Connector Type A: USB 
    • Connector Type B: Micro USB

    What's in the box?

    1 x 1m USB cable
      R24.90  Inc VAT
      Dual USB 5V 2.4A Type-C LED USB Mobile Power Bank 18650 Charging Module (mobile power bank charging)
      Description:

      This module is the perfect starting point if you are looking to build your own power bank.

      This module is ideal for 18650 batteries, 65mm long with the flat top. In the event that you use:
      • old batteries
      • different capacities
      • differnet brands
      Please ensure that they are at least above 3.5V each

      Not ideal to be used on batteries that have been too far depleted.

      After the battery is installed, plug in the charger to activate the battery before use.

      The real world conversion rate of a new "real capacity" battery is about 80%. Because ther is a line loss of the connection line. Estimation of mixed batteries or "budget" batteries are near impossible to estimate.

      For peak use, first allow the battery to fully discharge before charging it.

      Note: Reversing the polarity of the battery will burn the module.

      Specifications:

      • Switch Charging
      • Internal 2A charging current
      • Charging efficiency up to 90% @ 2A
      • Charging swtch frwquency 1MHz
      • Trickle/constant current/constant voltage three-stage charging
      • Charging current Adaptive adapter function
      • Charging current Temperature adjustment function, charging current automatically decreases with the increase of temperature
      • C/10 charging terminates
      • Intergrated charge overvoltage protection and battery overtemperature protection
      • Synchronous boost output 5.1V
      • Discharge switch frequency 50OKHz
      • Discharge efficiency up to 94%
      • Automatic identifiation of load, load automatically shut off
      • Original boost output heat regulation function
      • Protection of over current, short circuit, over voltage and over tepmperature of discharge module
      • Long press the switch, wake up the motherboard, charge the charging time of the phone, press the switch, the output can be turned off, the motherboards stops working.
      • MaIn board size: Thickness 9 * Width 25 * length 67 mm



      What's in the box?

      1 x Power bank type charging module
      R99.90  Inc VAT
      2.5A USB A to Type C Cable black 1m (black USB A to C Cable 1m)

      Description:

      USB-C is fantastic! What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! USB-C has a minor, yet genius modifications that allow them to be plugged into their ports regardless of orientation. No longer will you fight the USB "super position" where both orientations of your plug seem incorrect. A simple solution to a problem that nearly everyone has faced.

      As announced Raspberry Pi 4 model B has upgraded the power input port to USB-C and you will need this cable to power it. Although it is terminated with USB-A 2.0, the power wires (VUSB and GND) have thicker gauge and we have tested it. This cable can delivers up to 2.5A to Raspberry Pi 4 model B.

      Supporting USB 2.0 speeds and charging up to 2.5A, this 1 meter cable is perfect for embedded enthusiast that need the flexibility of a good cable and the wonderful feel of a reversible USB-C & USB-A connection. It is perfect if you want to boot up Raspberry Pi 4 Model B from a laptop. Not to forget to connect microcontroller development board like M5Stack.

      This cable has the D /D- wires along side large-gauge VBUS/GND wires. Although it is rated for 2A, we've successfully pulled [email protected] with minimal voltage drop.

      Features:

      • Standard USB-A connector
      • Reversible USB-C connector
      • USB 2.0 standard
      • 1 meter cable length


      What's in the box?

      1 x black USB A to C Cable 1m
      R56.90  Inc VAT
      USB A to USB B cable 1m (USB A to B Arduino 1m)
      Description:

      The staple of any USB connection, the USB A to B cable connects any standard host device (computer, hub, or controller) to any standard peripheral (printer, scanner, external drive).

      Specification:

      1. USB 2.0 specification
      2. Connector: USB 2.0-A male > USB 2.0-B male
      3. Cable length: 1m
      4. For use with Arduino

      What's in the box?

      1 x USB A to B cable

      R17.90  Inc VAT
      Dual Output Cable - USB A to 2.1mm DC Barrel & Micro USB (USB to jack and micro)
      Description

      • USB 2.0 type A to USB micro B and 2.1mm DC Barrel
      • Data and power is connected to USB micro B
      • Power is connected to DC Barrel Plug
      • Cable length: ~ 1 meter
      • Colour: Black

       
      What's in the box?
       
      1 x USB A to 2.1mm DC Barrel & Micro USB
      R49.90  Inc VAT
      Liitokala Lii-402 Micro USB DC 5V 4Slots 18650/26650/16340/14500 Battery Charger with power supply (4 bay charger w power)
      PLEASE NOTE:

      Misusing or mishandling a lithium-ion battery may cause a FIRE or EXPLOSION which can result in INJURY or DEATH.


      Description:

      The LiitoKala Lii-402 Smart Charger for Lithium Ion and NiMH batteries is the perfect bench mate to keep your radios, robotics and flashlights running at peak efficiency. In a sea of endless chargers for sale, we have found one that will meet and exceed the needs of many consumers.

      Specifications:
      Product name: Liitokala Lii-402 Micro USB 4Slots Battery Charger
      Input : Micro USB DC 5V/2A
      Output: 1.42V
                    4.2V±0.05V
                    3.65±0.05V
                    4.35±0.05V
      Current: 2000mA*1 1000mA*2 700mA*3 500mA*4
      Constant voltage, cut-off current: less than 100mAh
      Standby current: less than 15mAh

      Compatible with:
      Ni-MH/Cd
      AA/AAA/A/SC Sizes
      3.7V Li-ion battery including
      26650,22650,26500,18650,18490,17670,17500,16340,14500,10440

      Size: 112mm x 90mm x 30mm (L x W x H)
      Weight:  150 grams (incl. micro cable)

      USB Output function
      1. 0pen-circuit voltage of USB output : 4.9-5.3V; and the 4th slot is fixed for the USB discharge power source
      2. Output current: 1000mAh
      3. Open circuit current: <1mAh
      4. The corresponding voltage is 4.75-5.25V under 1000mAh current
      5. Cut-off voltage for discharge protection: 3.0±0.1V

      What's in the box?

      1 x Liitokala Lii-402 Micro USB 4Slots Battery Charger
      1 x USB Cable
      1 x Power supply
      R459.90  Inc VAT
      1m USB A Male To Mini 5 Pin Male Black (1m usb mini)
      Description:

      This USB 2.0 cable enables you to connect different devices e.g. HDD enclosure, digital cameras, mobile phones, navigation systems etc.

      Specifications:

      • Meets or Exceeds USB 2.0 Specifications
      • Connects to Cameras, PDA's, etc with Mini-B 5-Pin connectors
      • Supports faster data transfer rate (1.5 to 480 Mbps) for low speed and high speed devices including multimedia applications
      • Premium double-shielded cables with tinned copper braid and aluminum Mylar foil
      • Molded connectors and integral strain relief for extra durability and long life.

      What's in the box?:

      1 x USB to 5 pin cable
      R29.90  Inc VAT
      Raspberry Pi Zero 2 W USB Hub Kit (Zero2W Hub kit)
      This Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing/Making/Prototyping etc ASAP.

      The Kit includes:


      Getting Started with Raspberry Pi

      More on Raspberry Pi OS


      R819.90  Inc VAT
      R840.89
      Mega2560 WiFi R3 ATmega2560 ESP8266 32Mb memory USB-TTL CH340G. Compatible for Arduino Mega NodeMCU For WeMos ESP8266 (Mega2560 wifi)

      Description:

      Full integration on one board: Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb (megabyte)
      All of the modules can work together or each separately. And everyone has their own pinout headers
      The convenient solution for the development of new projects requiring Uno and WiFi
      Via USB you can update sketches and firmvare for ATmega2560 and for ESP8266. For this on board have the USB-serial converter CH340G
      Using this board is very simple
      The board has DIP-switch, to connect the modules
      For example, to: USB and ATmeg2560, USB and ESP8266, ATmega2560 and ESP8266
       
      Table DIP- Switch:
       
      Connection                                                                                       DIP
      ATmega2560<->ESP8266 
      1            2           3             4           5             6              7
      ON         ON        OFF       OFF          OFF        OFF          OFF
      USB <->ATmega2560                               
      OFF        OFF       ON        ON         OFF        OFF          OFF
      USB<->ESP8266 (Update firmware or sketch)
      OFF        OFF       OFF       OFF        ON         ON           ON
      USB<->ESP8266 (communication)           
      OFF        OFF       OFF       OFF        ON         ON           OFF
      All independent                                       
      OFF        OFF       OFF       OFF        OFF        OFF          OFF
       
      Special solution:
      <div >USB <->ATmega328<-> ESP8266
                                                                                             DIP                                        SWITH 2
      Connection                                        1       2       3      4      5         6           7
       
      USB <-> ATmega2560<-> ESP8266    ON    ON    ON      ON   OFF    OFF      OFF          To RXD3/TXD3
       
       
      USB converter CH340G connect to RX0/TX0 of ATmega2560
      ESP8266 connect to RX3/TX3 of ATmega2560

      Documents
      Dimensional drawingDimensions MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBDimensions MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB
      PinoutPinout MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBPinout MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB

      Schematic

      Schematic of MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB
      DriversWindows driver for MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBLinux driver for MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBMac OS driver for MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USBAndroid driver for MEGA WiFi R3 ATmega2560 ESP8266, flash 32Mb, USB-TTL CH340G, Micro-USB
       
      Package Contents:
      1 x Mega WiFi Board
      R399.90  Inc VAT
      SanDisk Ultra Fit USB 3.1 Flash Drive 16GB (Sandisk flash fit 16GB)

      Add Space, Fast. Just Plug It In.

      The simple way to add extra, high-speed storage to your device! The SanDisk Ultra Fit™ USB 3.1 Flash Drive delivers performance that lets you move a full-length movie up to -15x faster than with standard USB 2.0 drives. Plus, thanks to its compact, streamlined design, you can plug it in and leave it in.

      Compact plug-and-stay design

      This compact flash drive is designed as plug-and-stay storage for laptops, tablets, TVs, gaming consoles, car audio systems, and more. Plug it in, and you’ve got instant storage that’s always on board!

      High-speed USB 3.1 performance
      Transfer files quickly with 130MB/s read speed. With write speeds up to 15x faster than standard USB 2.0 drives, you can move a full-length movie to the drive in less than 30 seconds.

      SanDisk SecureAccess® software helps protect your privacy
      Create a private folder on your drive with SanDisk SecureAccess software. This 128-bit AES encryption software makes it easy to password-protect critical files. Drag and drop files into the vault, and they'll be encrypted.

      Full Specifications

      Interface: USB 3.1 Gen 1
      Connector: USB-A
      Compatibility: USB 3.1 (backward compatible with USB 3.0 and USB 2.0)
      Sequential Read Performance: Up to 130MB/s
      Dimensions: 29.8mm x 14.3mm x 5mm

      What's in the box?

      1 x USB flash drive

      Datasheet

      Disclosures

      1. 32GB, 64GB, 128GB, 256GB, 512GB: Write up to 15X faster than standard USB 2.0 drives (4MB/s), read speeds up to 130MB/s. 16GB: Write faster than standard USB 2.0 drives (4MB/s); read speeds up to 130MB/s. USB 3.1 Gen 1 or USB 3.0 port required. Based on internal testing; performance may be lower depending on host device. 1MB=1,000,000 bytes. 
      2. Password protection uses 128-bit AES encryption and is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess). FOR USE IN CHINA:  Password protection is supported by Windows® 7, Windows 8, Windows 10 and Mac® OS X® v10.9 (Software download required for Mac, see www.SanDisk.com/SecureAccess)
      3. Based on 1.2GB MPEG-4 video transfer to drive with USB 3.1 Gen 1 or USB 3.0 host device. Results may vary based on host device, file attributes, and other factors. 
      4. Registration required; terms and conditions apply.
      5. 1 GB=1,000,000,000 bytes. Actual user storage less. 
      R119.90  Inc VAT
      Per Page      61 - 80 of 89