oneninedesign
Please note: Raspberry Pi 4 is not included
The One Nine Design Raspberry Pi Case is a three piece, stylish case designed to keep your Raspberry Pi safe but enable easy access to the GPIO. This case also features a slot for holding the Raspberry Pi Camera module!
Features
- Attractive high gloss material
- Vented lid to facilitate convection cooling
- Room for heat sinks
- Integrated camera mount (suitable for the official camera board)
- 3 piece construction with wall mounting options
What's in the box?
1 x One Nine Design Case
Black colour case for the Raspberry Pi 5 computer board. Designed and manufactured in the UK.
The case is professionally molded in ABS with no screws required for assembly.
A three-piece construction provides better access to the Pi board and allows for different assembly combinations and improved ventilation.
This case offers routing for FFC and IDE cabling whilst leaving the lid in place for a clean appearance. The SD card is accessible at all times via a recess neatly hidden on the rear of the case.
Mounting points have also been located on the base section of the case for wall mounting or fastening to a secure surface (screws not included).
Features
- Moulded from recyclable ABS, manufactured in the UK, black colour
- 3-piece construction
- Integrated power button
- Soft rubber feet
What's in the box?
1 x One Nine Design Case for Pi5
Resources
Technical Data Sheet EN
Version Options
 |  |  |
| Pi5 Module BOX-A - This product Supports PCIe to Gigabit Ethernet port | Pi5 Module BOX-B Supports PCIe to 4-ch USB3.2 Gen1 ports | Pi5 Module BOX-C Supports PCIe to M.2 interface |
* the Raspberry Pi 5 is NOT included, please purchase separately if needed.
What's Onboard
Larger Space, strong Expandability
Larger internal space, supports connecting to various HATs such as PoE HAT, etc. also with space left for cable management
Comes with Pi5 HDMI and Type-C adapter(Multifunctional adapter)
Adapting Type-C, dual HDMI Female Ports, and screw terminal For Easier Connection with peripherals, Supports Two Power Supply connection methods from the front side or the back side
Reserved Airflow Vents for efficient heat dissipation
Supports installing cooling fan for better heat dissipation
*for reference only, the cooling fan is NOT included.
Outline dimensions
What's in the box?
1 x Pi5 HDMI and Type-C adapter
1 x PCIe to Gigabit ETH adapter
1 x Metal case and white aluminum alloy base plate
1 x Silicone button
1 x PCIe cable
1 x Screw terminal
1 x Screws pack
1 x SH1.0 3PIN cable
1 x SH1.0 3PIN squid cable
1 x PH2.0 3PIN cable
Resources
Version Options
| | |
| Pi5 Module BOX-A Supports PCIe to Gigabit Ethernet port | Pi5 Module BOX-B - This product Supports PCIe to 4-ch USB3.2 Gen1 ports | Pi5 Module BOX-C Supports PCIe to M.2 interface |
* the Raspberry Pi 5 is NOT included, please purchase separately if needed.
What's Onboard
Larger Space, strong Expandability
Larger internal space, supports connecting to various HATs such as PoE HAT, etc. also with space left for cable management
Comes with Pi5 HDMI and Type-C adapter(Multifunctional adapter)
Adapting Type-C, dual HDMI Female Ports, and screw terminal For Easier Connection with peripherals, Supports Two Power Supply connection methods from the front side or the back side
Reserved Airflow Vents for efficient heat dissipation
Supports installing cooling fan for better heat dissipation
*for reference only, the cooling fan is NOT included.
Outline dimensions
What's in the box?
1 x Pi5 HDMI and Type-C adapter
1 x PCIe to 4-ch USB 3.2 Gen1 adapter
1 x Metal case and white aluminum alloy base plate
1 x Silicone button
1 x PCIe cable
1 x Screw terminal
1 x Screws pack
1 x SH1.0 3PIN cable
1 x SH1.0 3PIN squid cable
1 x PH2.0 3PIN cable
Resources
Designed and manufactured right here in the UK, this enclosure is designed to fit the 7" version of the Raspberry Pi Touch Display 2 whilst also mounting your Raspberry Pi 5 or Raspberry Pi 4, available in black or white.
The enclosure supports both landscape and portrait orientations with integrated cable management offering multiple cable exit points. It's also wall mountable, and includes a gap to ensure airflow from the rear of the case.
When used with a Raspberry Pi 5, the Pi 5 power button can be accessed by a rear power button extension. It's also compatible with the Raspberry Pi Active Cooler and most slim/short HATs - we'll continually update the HAT compatibility list further down the page (please send our support guys a message if you'd like them to check a specific HAT for fitment).
The enclosure has ventilation here, there and everywhere, ensuring your project stays at sensible temperatures. It also features easy release buttons on each side to open up the case.
Important notes
- Touch Display 2 and Raspberry Pi not included.
- Not compatible with the 5" Touch Display 2.
- You will need the original fixings and cables that came with the Raspberry Pi Touch Display 2 7" Display.
- Micro-HDMI cables are a very tight fit (a compromise at the design stage!), so this is best used as a standalone unit, not combined with HDMI monitors.
Features
- Designed for the 7" Raspberry Pi Touch Display 2
- Compatible with Raspberry Pi 5 and Pi 4
- Available in black or white
- Supports landscape and portrait use
- Integrated cable management routing with multiple cable exit points
- Wall‑mountable, includes mounting points for fixed installation
- Rear airflow gap ensures ventilation from the back of the enclosure
- Pi 5 power button access
- Supports the Raspberry Pi Active Cooler
- Compatible with most HATs
- Multiple vent points to maintain sensible operating temperatures
- Easy‑release buttons on each side allow quick opening of the case
- Designed and manufactured in the UK
HAT Compatibility
Whilst the case should fit most slim/short HATs, some come in odd sizes with large connectors, so we'll maintain a list here of any HATs we test for customers.
The main issue with fitment appears to be the built-in standoffs attached to the display, which can get in the way. This restricts most HATs over 20mm high.
Fits ✅
- SKU: EP-0129: GPIO Screw Terminal HAT
Does NOT fit ❌
- Most DAC HATs (due to the protruding connectors)
- Any 'base' (bottom-mounted) add-ons/HATs
- SKU: WAV-21695: Uninterruptible Power Supply UPS HAT (B) for Raspberry Pi
What's in the box?
1 x Enclosure for Raspberry Pi Touch Display 2 (7")
includes:
1 x Front panel
1 x Rear cover
Resources
Version Options
| | |
| Pi5 Module BOX-A Supports PCIe to Gigabit Ethernet port | Pi5 Module BOX-B Supports PCIe to 4-ch USB3.2 Gen1 ports | Pi5 Module BOX-C - This Product Supports PCIe to M.2 interface |
* the Raspberry Pi 5 is NOT included, please purchase separately if needed.
What's Onboard
Larger Space, strong Expandability
Larger internal space, supports connecting to various HATs such as PoE HAT, etc. also with space left for cable management
Comes with Pi5 HDMI and Type-C adapter(Multifunctional adapter)
Adapting Type-C, dual HDMI Female Ports, and screw terminal For Easier Connection with peripherals, Supports Two Power Supply connection methods from the front side or the back side
Reserved Airflow Vents for efficient heat dissipation
Supports installing cooling fan for better heat dissipation
*for reference only, the cooling fan is NOT included.
Outline dimensions
What's in the box?
1 x Pi5 HDMI and Type-C adapter
1 x PCIe TO M.2 Board x1
1 x Metal case and white aluminum alloy base plate
1 x Silicone button
1 x PCIe cable
1 x Screw terminal
1 x Screws pack
1 x SH1.0 3PIN cable
1 x SH1.0 3PIN squid cable
1 x PH2.0 3PIN cable
Resources
- 1