Raspberry Pi
Please Note:
This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.
This is the Official Raspberry Pi2, Pi 3 B and Pi3 B+ Case. Specially made and beautifully crafted, this nifty and tactile snap-together case is designed to protect your RPi 3! Side pieces can be individually removed to enable access to the GPIO, and the top can also be removed to enable the addition of HATs or other GPIO periphery! There's even LED lights pipes to top it all off!
Features
- Fabulous Raspberry Red and White Colour Combination
- 5 Part "Snap-Fit" Enclosure
- Cut-outs for all connection points
- Micro SD card cut-out
- Plastic LED light protector
- Stick on rubber feet for case stability
What's in the box?
1 x Raspberry Pi 3 case
Resources
The Raspberry Pi Camera Module V2 is the new and improved official camera board from the Raspberry Pi Foundation! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.
The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor. A 150mm CSI cable is included with every camera.
The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important.
The Raspberry Pi Camera Board V2 Features:
- Fixed focus lens on-board
- 150mm CSI camera cable included
- 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
Note: to use the camera with Raspberry Zero, you need to buy a specific cable: Raspberry Pi Zero Camera Cable
The new Raspberry Pi OS release includes the new Picamera2 Python camera interface.
What's in the box?
1 x Raspberry Pi Camera
Building on the success of the base Raspberry Pi 500, Raspberry Pi 500+ replaces the membrane keyboard with a high-quality mechanical keyboard with individually addressable RGB LEDs and replaceable keys; increases the system memory from 8GB to 16GB; and bundles a 256GB SSD pre-loaded with the latest version of Raspberry Pi OS.
Key features include:
- 2.4GHz quad-core, 64-bit Arm Cortex-A76 CPU, with 512KB L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU
- 16GB LPDDR4X-4267 SDRAM
- 2.4 GHz and 5.0 GHz 802.11ac Wi-Fi
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- 256GB SSD pre-loaded with Raspberry Pi OS
- Micro SD card slot, with support for high-speed SDR104 mode and the command queuing extension
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 1 × USB 2.0 port
- Gigabit Ethernet
- Dual micro-HDMI ports
- 78-, 79- or 83-key (depending on regional variant) mechanical keyboard
- 40-pin GPIO header
- Kensington lock
- 5V/5A DC power – via separate USB-C power supply
- Power button on the keyboard
What's in the box?
1 x Raspberry Pi 500 unit only
1 x Official Raspberry Pi 27W USB-C Power Supply
1 x 32GB preloaded micro SD with D Adapter and Jewel Case
1 x Official White mouse
2 x Official 2m Micro HDMI to Standard HDMI cables
1 x Raspberry Pi Beginner’s Guide
You might also need...
The Raspberry Pi 500+ comes without the below items. Have a look at what else you still need to get going.
- a display or monitor