RPi 4 cases

Raspberry Pi 4 cases and enclosures
Sort By:  
R379.90  Inc VAT
Need to remove access to your uSD or USB ports? This is the case for you
R184.90  Inc VAT
R199.90
Upgrade your official RPi4 case with this fan and heatsink. Please note: The case is not included
R79.90  Inc VAT
R255.90  Inc VAT
Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.
R899.90  Inc VAT
R109.90  Inc VAT
Raspberry Pi4 model B official black/grey case (Pi4 official black/grey case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

Description:

The official Raspberry Pi 4 Model B  case in a stunning black & grey design (also available in red & white)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case

What's in the box:

1 x Raspberry Pi4 model B case
R89.90  Inc VAT
Raspberry Pi4 model B official red/white case (Pi4 official red/white case)

Please note: The Raspberry Pi 4 model B board is not included with the case

Description:

Need to cool your RPi4 down? You might like the official case fan and heatsink add on.

The official Raspberry Pi 4 Model B  case in a stunning red & white design (also available in black & grey)

  • Optional clip-on lid provides protection but can be removed if using a HAT
  • All primary ports (including microSD) accessible
  • Snug and secure fit protects your Pi while looking great!
  • Anti-slip feet keep your Raspberry Pi stable
  • Power and activity lights still visible through the end of the case
  • High-quality, two-part ABS construction
  • Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.

What's in the box?

1 x Raspberry Pi Official Pi4 Case
R89.90  Inc VAT
Pibow Coupé 4 Red case (Raspberry Pi4 only) (Pibow Coupe Pi4 Red)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4! 
Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R179.90  Inc VAT
Pibow Coupé 4 Ninja Black case (Raspberry Pi4 only) (Pibow Coupe Pi4 Black)
Description:

Pibow Coupé 4. The slim, hackable, and attractive case for the Raspberry Pi 4!

Note: This Pibow Coupé is only compatible with the Raspberry Pi 4!

Features

  •     Compatible with Raspberry Pi 4 only
  •     Cutout in lid for 40x30mm heatsink or Fan SHIM
  •     Super-slimline profile
  •     Fully HAT-compatible
  •     Works great with standoffs!
  •     Protects your beloved Pi!
  •     Clear top and base (Ninja and Red) leave Raspberry Pi 4 visible
  •     GPIO cut-out
  •     Handy laser-etched port labels
  •     Leaves all ports accessible
  •     Made from lightweight, high-quality, cast acrylic
  •     Great for hacking and tinkering!
  •     Made in Sheffield, UK


Crafted out of five unique layers including a transparent top and base (Red and Ninja) that leave your beautiful Raspberry Pi 4 visible inside. Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain a Raspberry Pi 4 while leaving the primary ports, including the camera port, display port, and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly. The dimensions are: 99x66x15mm (WxLxH, not including bolt heads and nuts).
R169.90  Inc VAT
Raspberry Pi4 black ABS Case with Cooling Fan and Heat Sinks (Pi4 ABS black case)
Description:

This is a new design ABS case to protect your Raspberry Pi 4 Model B computer, it is only compatible with your Raspberry Pi 4 Model B, does not support other versions. Also supports a dc 5v cooling fan.

Features:
ABS material.
Easy to install.
All ports and slots of the case match with Raspberry Pi 4 Computer Model B perfectly.
Supports a DC 5v extractor cooling fan.
 

What's in the box:

1 x ABS Case for Raspberry Pi 4 Model B
1 x Cooling Fan 30mm x 30mm x 7mm
4 x Heat Sinks(new add on to this case)

Instructions:


R69.90  Inc VAT
Aluminium Alloy Case for Raspberry Pi 4 Dual Cooling Fans (Pi4 heatsink case 2fan)
Please note: Raspberry Pi 4 is not included

Description

  • Aluminium Alloy Case for Raspberry Pi 4 Model B
  • Comes with dual cooling fans
  • Firm, dust resistance, excellent heat spreading

Black Armour for Raspberry Pi Pi 4

Equip Your Pi 4 with Armour and Cooling Fans, Call Me Icy Beauty



High Quality & Durable Aluminium Alloy

Aluminium Alloy, Oxidation & Sand Blasting & Coating, Corrosion Proof, More Durable



Chip-contacted Heat Spreader

Built-in Heat Spreader, Fastly Transfers Heat from Pi CPU to the Whole Case




Clever Opening Design, Precise Cut-out

Utilizing Advanced Processing Technology, Make It Highly Matching the Board

WiFi And Bluetooth, As Good As Before

Non-shielding Design, No Worry for the WiFi and Bluetooth Signal



What's in the box?


1 x  Aluminium Alloy Case for Raspberry Pi 4 Dual Cooling Fans



R179.90  Inc VAT
FLIRC Raspberry Pi 4 Case (FLIRC Pi4 case)
WHAT IS THE FLIRC RASPBERRY PI CASE?

The perfect home for your new Raspberry Pi 4. We will ensure our case is adjusted to fit the latest Raspberry Pi specifications. Our case is made of a beautiful aluminum core heat sink that is sandwiched between two black, soft touch shells that feel amazing in your hands. But once it's out of your hands, it blends in with your entertainment system.

WHATS NEW?

This is the first affordable Raspberry Pi case made out of aluminum. We wanted to ensure we didn’t sacrifice form over function, so we used the aluminum housing of the case to provide a built in heat sink. Supplied with the case is a thermal pad and 4 screws for the simplest Raspberry Pi case assembly on the market. It only takes seconds to drop your Raspberry Pi into it’s amazing new home and show it off on your counter top. .

THERE'S MORE...

We included rubber feet to raise the enclosure so it just hovers underneath your television. In addition to the built in heat sink, small ventilation slots on the bottom help keep the Raspberry Pi cool. GPIO pins are accessible through the slot on the bottom of the case and there is no need for disassembly to get to the SD card. We know you will love the attention to detail we put in throughout the case.

FAQs
  • Does the case support the Raspberry Pi 4?
    • Yes, designed, proven, and tested only for the Raspberry Pi 4B
  • Can I see the Raspberry Pi's LEDs?
    • Yes, you can.
  • Why did you make a Raspberry Pi case?
    • Flirc is one of the best selling items for the Raspberry Pi. We haven't only been concentrating on Flirc, we've been concentrating on enhancing media centers and their experiences. We've got more coming.
  • What does the case come with?
    • The case comes partially assembled. All you need to do is put your thermal pad on the CPU, drop your Raspberry Pi inside the case, and screw the bottom of the case on with the included screws.
  • Does the case come with a Raspberry Pi?
    • The case does not come with a Raspberry Pi.
  • Can I access the SD Card?
    • Yes, the SD card is accessible through a slot on the front of the case.
  • How do I attach the Thermal Pad?
    • Take off the plastic force fields from both sides and place it on the CPU.
  • Does this case support the Raspberry Pi 3B , 3B, or 2?
    • No
  • What kind of thermal pad do you use?
    • ARCTIC Thermal pad (1.5mm thick)
R379.90  Inc VAT
PoE HAT Case for Raspberry Pi 3/4 (V2.0) (Pi4 POE case)
Description

This Raspberry Pi PoE HAT case is our own design manufactured right here in our warehouse!

The case brings together the Raspberry Pi (4 or 3), and Official Raspberry Pi PoE HAT into one simple, neat package.

Designed to be stylish and functional, the PoE HAT Case features side and top 'hex' ventilation for the PoE HAT fan to keep your Raspberry Pi nice and cool, and enables access to all the Raspberry Pi Ports whilst keeping both boards safe and sound!

We now include two lids - one for the PoE HAT, and another for the original PoE HAT.

New for v2.0

  • Now fits both the Raspberry Pi 3/3B and the Raspberry Pi 4 (via the included alternative side panels)
  • Rounded port holes
  • New signature hex-pattern air vents
  • Glass-look top
  • ...and a few other tweaks and changes. It's our best PoE HAT case yet!

Features

  • Compatible with Raspberry Pi 4 and 3 (alternate side panels included)
  • Laser Cut Acrylic
  • Easy Assembly
  • Built-in 'hex' air vents
  • Enables access to all Raspberry Pi Ports
  • Manufactured in the UK

Assembly

Assembly Guide

R174.90  Inc VAT
SecurePi Case for Pi4 (Pi4 SecurePi case black)

Please Note: The Raspberry Pi board is not included

Description:

Our all-new case that we designed from the ground up for the Pi 4.  You can learn more about the case and the design process in the blog.  

The SecurePi Case was designed to work with the Pi 4.  With optional SD and USB/Ethernet/HDMI covers as well as its discrete cooling vents, this functional and attractive case will complement any Raspberry Pi 4.

Unique features:

  • Stunning design 
  • Cooling vents on the top of the case that work perfectly with the PoE HAT and the Pimoroni Fan SHIM
  • Optional cover for the power/HDMI ports or the Ethernet/USB ports with a knock-out for Ethernet
  • Optional cover for the microSD card
  • Clip together or screw together design.  We include the screws if you want additional security, but the case holds together just fine without them if you want flexibility
  • Pass-throughs for GPIO, camera, and DSI cables
  • Viewing holes for onboard Raspberry Pi LED's

Package Includes:
1 x SecurePi case
1 x USB/Ethernet cover with a knock-out for Ethernet
1 x uSD card cover
4 x case screws
Need to remove access to your uSD or USB ports? This is the case for you
R184.90  Inc VAT
R199.90
Argon ONE V2 Aluminum Case for Raspberry Pi 4 with Safe Power Button (Argon One V2 case Pi4)
Note: ExplainingComputers has a great video on this case at https://www.youtube.com/watch?v=IJn3fz7Zk4Q


Argon ONE V2 Aluminum Case Pi 4 Applicable

Make a shiny mini-computer by this decent aluminium-alloy case customized for Raspberry Pi 4

Sleek Aluminum-alloy Enclosure

Aluminum-alloy enclosure with modern space grey finish, robust and nice looking

Removable Top and GPIO Recess

Neat GPIO recess along with magnetic removable top, both aesthetic and protective, there are even clear pin labels and color-coded header, make it easier to use

Amazing Temperature Management

The extension pillars makes the aluminum case become a big heatsink to transfer heat from the board, combined with the cooling fan and multi airflow vents, cooling effect can't be better


Tidy cable management

All of the ports are accessed at the back, minimal cable clutter

Safe & handy power button

Dedicated power button, combined with one-line script, to turn the computer on / off while ensuring the stored files are safe, also supports customized function

Easy assembly without messy wiring

Comes with two PCB boards to simply build it up, no messy wiring, no wrong connection, more stable, more safe

Proper bottom design

TF card slot on the bottom, as well as two airflow vents and four rubber feet

Development Resources

Wiki: www.waveshare.com/wiki/PI4-CASE-ARGON-ONE

R529.90  Inc VAT
Argon NEO Raspberry Pi4 Case (Argon Neo Pi4 case)
Description:

  • MINIMALIST DESIGN |The Argon NEO is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B.
  • SLIM ALUMINUM ENCLOSURE | Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics.
  • PASSIVE COOLING | The case acts as passive cooling for the high demands of the Raspberry Pi 4 Model B.
  • ROBUST YET PORTABLE | Assembling the case with the Raspberry Pi is easy. With the case's small form, it's easy to bring anywhere.
  • SLIDING MAGNETIC TOP | The case has a magnetic top to keep the ports safe when not in use.
  • ACCESS TO ALL PORTS | All the ports of the Raspberry Pi 4 while keeping the Pi safe.

Compatibility:

Raspberry Pi 4 Model B
Length: 9.53 cm
Width: 7.15 cm
Height: 2.75 cm

R279.90  Inc VAT
3.5 Inch LCD Display Touch Screen Monitor Case Pen for Raspberry Pi 4/4B (3.5 touch case pen)
Features:

Developed for Raspberry Pi 4 B.
3.5-inch HDMI LCD screen with touch function support systems.
Support of input resolution of 3.5 "display monitors from 480 x 320 to 1920 x 1080 (3: 2 ratio is better).
Supports HDMI audio input, stereo 3.5mm audio output.
Plug and play, easy and convenient to use.
LCD screen contains a protective cover.
ABS case: Use the top cover if you are not installing the 3.5-inch display.
 
Specifications:

Type: 3.5 Inch screen set for Raspberry Pi 4 B
LCD Type: TFT transmissive
SPI Interface: 32 MHz
Support Resolution: 480 x 320
Backlight: 6 white LEDs
Tap Chip: xpt2046

The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display


 
Package includes:

1 x 3.5 Inch LCD Touch Screen
1 x ABS Case for Raspberry Pi 4 B
1 x Touch Pen


Works with the Low-Profile CPU Cooling Fan for Raspberry Pi 4B/3B /3B with Aluminum Alloy Bracket
Not included



R469.90  Inc VAT
Case Fan and heatsink for Raspberry Pi 4 Official case (Pi4 case fan heatsink)

Please note: The case is not included


Description:

The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.

The temperature-controlled fan delivers up to 1.4 CFM of airflow over the processor, memory, and power management IC. The bundled 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor.

Specifications:

Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
Fan speed control: Pulse width modulation control via user-selectable GPIO pin
Maximum airflow: 1.4CFM
Case Material: Clear PC
Fan size: 25mm x 25mm x 7mm
Compliance: For a full list of local and regional product approvals please visit:
www.raspberrypi.org/documentation/hardware/raspberrypi/conformity.md

• Fits perfectly into the lid of the official Raspberry Pi 4 Case
• Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory and power-management IC
• 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor

What's in the box?:

1 x  25mm x 25mm x 7mm fan
1 x 18mm × 18mm × 10mm heatsink
1 x housing for fan

Fitting Instructions



1 Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base.

2 Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid.

3 If you are also fitting the heatsink, remove the backing paper from the selfadhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position.

4 Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:

Lead          Colour    GPIO Pin
5v                RED         4
Ground        BLACK      6
GPIO 14       BLUE        8



5 Assemble the case.

Using your fan

Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.

Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:

  1. Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control Alt T.
  2. Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.

Then open the Raspberry Pi Configuration tool:

  1. Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
  2. Select the Performance tab.
  3. Next to Fan, click Enabled.
  4. If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
  5. Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.
Upgrade your official RPi4 case with this fan and heatsink. Please note: The case is not included
R79.90  Inc VAT
ProtoDock (protodock)
Description

The ProtoDock is an all-in-one desktop prototyping dock for your Raspberry Pi 4, Raspberry Pi 3 or any other 40-pin Model B Raspberry Pi!

Similar to its little brother the ZeroDock, the ProtoDock keeps your desk tidy and all of your vital Raspberry Pi accessories in one place.

Please note: Simple assembly required. Please see the assembly guide

No more searching for micro-SD cards, SD adapters, USB-C adapters or USB devices. It’s all here, every time you’re ready to prototype a project, in one neat and tidy package.

Our example configuration holds your Raspberry Pi 4, a 400-point clear breadboard, 4 micro-SD cards, an SD-adapter, 4x USB devices and 2x universal slots (great for USB-C adapters or anything else you want to store).

You can of course use the storage slots for whatever you like... Customise it and use it in whatever way works best for you!

Despite sitting flush with the top glass-effect acrylic layer of the dock, all of the Raspberry Pi’s ports are accessible, including access to the micro-SD slot. HATs can also be fitted*.

The dock is made up of 4 slick, sandwiched layers of matte black and glass-effect laser-cut acrylic! A really stunning and useful home for your Raspberry Pi and projects!

Assembly guide available here

Kit includes

  • 4 layer laser-cut acrylic dock
  • 400-point clear breadboard
  • Fixings and spacers

Please Note - Raspberry Pi & accessories not included (but the breadboard is!)

*Requires removal of the lower ProtoDock Raspberry Pi mounting screws, and removal of the upper HAT spacers, if applicable.

R255.90  Inc VAT
HighPi Raspberry Pi 4 Model B Case (HighPi Pi4 case)
Description

Updated for the Raspberry Pi 4, the very popular HighPi case defines ease of use and versatility. Tall enough to host a wide range of add-on boards, and slim enough to look cool. Use it with a Pi 4 alone, or with popular add-ons like the PoE HAT, Serial HAT, UPS HAT, or HiFiBerry audio HATs.

RAPID, TOOL-FREE ASSEMBLY

The HighPi case sets the standard for ease of use and versatility in Raspberry Pi cases. Installing or removing the Raspberry Pi PI3B board is astonishingly quick, simple, and secure; all without tools or assembly. One snap action locks the Pi board into the case; the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius! Customers assembling large volumes of Pi boards in cases love how much time and effort this case saves them.

The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case. When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables.

FITS ALL KINDS OF HATS

Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. The generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. A two-section break-out allows you to choose how much of the A/V side of the case to open up for connectors on attached boards. Here are just a few examples of the HATs that fit perfectly in the HighPi.

RASPBERRY PI POE HAT
The HighPi case holds the PoE HAT perfectly, fully securing both the Pi and HAT boards. Many competing cases cannot secure the Pi board to the case once a HAT is added to it. The side and bottom ventilation slots allow the fan to move air in and out of the case.
HIFIBERRY HATS
This case perfectly accommodates the full line of HiFiBerry audio boards. Use one break-out section for DAC and Digi , and both for the Amp or DAC DSP. There is generous clearance around the RCA connectors for bulky, high-end cables.
SERIAL HAT
Do you need to ensure power to your Pi or communicate via serial? Our serial HAT can be enclosed tidily along with the Pi board.
UPS HAT
The UPS HAT and Pi board are both enclosed easily in the HighPi case, with significant space for larger batteries. The GPIO connector pins remain accessible, and a GPIO ribbon cable can be run out of the case while fully assembled.

 

HIGHPI CASE FEATURE LIST
  • High quality ABS plastic case, designed and made in Canada
  • Industry-leading ease of use, rapid tool-free assembly and disassembly
  • Large internal volume for HATs, break-out boards, or heat sinks
  • Vents on three sides double as fly-through cable ports
  • Two-section breakout on A/V side for HAT board I/O
  • Large vent opposite A/V side allows GPIO ribbon cable pass-through
  • Micro SD card access port
  • Mounting option 1: two M3.5/M3/#6 screws slide into wall mounts
    for easy removal, horizontal orientation with A/V side down, 40mm spacing
  • Mounting option 2: four M3.5/M3/#6 screws through feet from inside for
    secure mounting in any orientation, 68.3 x 38.8mm spacing
  • Self-adhesive rubber feet included, set of 4
  • Matte finish hides fingerprints
DIMENSIONS
  • External dimensions: 97 x 66 x 41mm
  • Internal volume for breakout boards: 90 x 60 x 28.8mm
R279.90  Inc VAT
Modular Raspberry Pi4 Case - Black (modular pi4 black case)
Please note: RPi4 and fan not included

Description

This is our very own modular Raspberry Pi 4 injection moulded case - a fully customisable and adaptable modular unit aimed to suit a range of Raspberry Pi applications.

Modular Design

The case is compatible with a range of customisable modular features allowing enhanced security, functionality and compatibility with additional hardware such as HATs. These include mounting points for a 5V GPIO fan, stackable 10mm spacer layers, micro-SD card covers and VESA adaptors.

All Ports Available

All of the Raspberry Pi's ports are available, and the light pipes ensure you can keep an eye on the LED activity light from outside of the case.

The case also includes dedicated slots below the lid for GPIO, CSI and DSI cables, and even features a clever SD card holder inside the case! 

Fan Cooling Option

The lid features a fan mounting section to mount one of our 5V GPIO fans. Simply fit the fan to the lid using the screws included in our fan kits and plug the fan into the GPIO header (red = 5V, black = GND).

Even with a fan fitted, the case can still fit one of our XL heatsinks or our heatsink sets.

Stack high!

Optional spacer layers (available separately) are designed to be stacked up to 5 spacers high, so that your case can grow with your project (additional screws are required for more than 1 spacer, which are also available separately).

Please note: Due to the lid's fan mounting points, spacers will be required to fit most HATs.

Large rubber feet are also included with the case to ensure your project is sturdy and rattle-free.

Features

  • Raspberry Pi 4 two-part (lid & base) plastic case
  • LED Status Light Pipes
  • Pi is fixed to the case with screws for a secure fitting
  • Secure case locking via screws (included)
  • Airflow - Internal volume perfect for adding heat sinks
  • GPIO 40-pin ribbon cable slot
  • Combined CSI camera cable and DSI video cable slot
  • Internal SD Card Holder
  • Streamlined looks
  • Dedicated wall mounting points
  • Matt finish body with gloss lid
  • Available in black and clear
  • Designed in the UK
  • Strong & Durable ABS Plastic


Case Dimensions

  • Length: 104.95mm
  • Width: 74.95mm
  • Height: 36.00mm

    Modular Add-On Options Include the Following:

    Micro SD Card Cover

    • Flush, lockable and tamper-proof
    • Secure your micro-SD card from probing fingers
    • Protect your micro-SD card from accidental knocks & bangs

    10mm Stackable Spacers

    • Allows your case to be used with HATs
    • Spacers raise the internal height by 10mm
    • Can be stacked to increase internal height by up to 50mm (5 spacers)
    • Great for embedded applications and hobbyist projects
      R129.90  Inc VAT
      Argon One M.2 Aluminum Case For Raspberry Pi4 With M.2 Expansion Slot (Argon M.2 Pi4)

      Description:

      The Argon ONE M.2 Case ups the ante by providing (1) two full-sized HDMI ports, (2) Power Management Modes that allows for automatic booting, (3) Built-in IR support with streamlined options for configuration and (4) Integrated M.2 SATA SSD support through the USB 3 Ports of the Raspberry Pi 4.

       

      Argon ONE M.2 Case extended support for M.2 SATA SSDs allows you to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card.

       

      Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.

       

      It is compatible with any M.2 SATA SSD with Key-B and Key B&M.




      • M.2 SATA SSD Compatibility | Accepts any size of M.2 SATA SSD with Key-B or Key-B&M
      • UASP Supported for Raspberry Pi 4 | Maximizes the high speed data transfers for Raspberry Pi 4
      • Two Full-Sized HDMI | Improves the dual-monitor support of the Raspberry Pi 4 for its video input
      • Power Management Modes | Offers 2 power management options with automatic booting or “Always ON Mode
      • Built-in IR Support | Programmable IR support to the Raspberry Pi with streamlined options. Works out of the box with the Argon ONE Remote.
      • Active Cooling | Software Programmable 30mm FAN via the Argon ONE software
      • Passive Cooling | Aluminum alloy top case acts as a giant heatsink connected to the CPU of the Raspberry Pi 4
      • Cable Management | Repositioned all ports to the back of the Raspberry Pi 4 to highlight its sleek and modern design.
      Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.
      R899.90  Inc VAT
      Sleeve for Raspberry Pi400 (Sleeve Pi400)
      Description

      Our stylish sleeve for the Raspberry Pi 400 (not included) is a great way to keep your keyboard clean and dust-free whilst adding an element of protection when travelling with your new favorite coding machine!



      Whether you're taking your Raspberry Pi 400 to a coding club, to school, a friend's house or just simply putting it away when not in use, our protective sleeve is an affordable and stylish way to keep it dust-free and safe from scratches.

      The stitched sleeve comes in a classic grey material with a simple velcro strap securing your Pi400 in place. The lower corner has The Pi Hut logo embossed into the material.

      Note: This sleeve provides protection from scratches and dirt/dust, however, the material cannot protect against large impacts or liquids.

      R109.90  Inc VAT
      3 Layer Raspberry Pi 4/3/2 Model B Acrylic Cluster Case Cooling Fans (3xpi cluster layer case)
      Specifications:

      Material: Acrylic
      Color: Transparent
      Layer: 3-Layer (can fit 3 x RPi 3/4 model B)
      Compatible Model: For Raspberry Pi 4/3/2 B and B

      Convenient access to all external devices, like USB, GPIO and SD card.


      What's in the box?

      4 x Acrylic Board not including Raspberry Pi boards)
      1 x set Screws and Nuts
      4 x Cooling Fans
      1 x Fan Cover

      R299.90  Inc VAT
      1 Layer Raspberry Pi 4/3/2 Model B Acrylic Case Cooling Fan (1xpi layer case)
      Description:

      Keep your Raspberry Pi cool and safe with this enclosure. Convenient access to all external devices, like USB, GPIO and SD card.

      Specifications:

      Material: Acrylic
      Color: Transparent
      Layer: 1-Layer (can fit 1 x RPi board)
      Compatible Model: For Raspberry Pi 4/3/2 B and B

      What's in the box?

      2 x Acrylic Board (not including Raspberry Pi board)
      1 x set Screws and Nuts
      1 x Cooling Fan
      1 x Fan Cover

      R139.90  Inc VAT
      Per Page      1 - 20 of 28