Sensor Kits

Sensor Kits
Sort By:  
Use this kit as inputs for sensing and outputs for reporting in your projects. Compatible with all models of Arduino and Raspberry Pi
R329.90  Inc VAT
R179.90  Inc VAT
R1,213.04  Inc VAT
R1,439.90
37-in-1 Sensor Module Kit (C1 37-in-1 sensor kit)
Description:

Use this kit as inputs for sensing and outputs for reporting in your projects.
You are purchasing a fantastic set of components to get you started! You can
measure light, time, magnetic fields, temperature, humidity...you can measure sound and create sound, you can measure tilt and user input! All of these components are presented on easy to access boards and allow you to connect them rapidly to the Arduino or Raspberry Pi, RP2040 Pico, ESP board.

Specifications:

Product Dimensions: 10.63 x 7.09 x 1.73 inches
Item Weight: 14.1 ounces 
Number of modules: 37

What's in the box?:

1 x XY JoyStick
1 x Relay
1 x Big Sound
1 x Small Microphone
1 x Tracking
1 x Avoid
1 x Flame
1 x Linear Hall
1 x Touch
1 x Digital Temperature
1 x Buzzer
1 x Passive Buzzer
1 x RGB LED
1 x SMD RGB
1 x 2-Color LED
1 x 2-Color
1 x Reed Switch
1 x Mini Reed
1 x Heartbeat
1 x 7 Color Flash
1 x Laser
1 x Button
1 x Shock
1 x Rotary Encoders
2 x Magic Cup
1 x Tilt Switch
1 x Ball Switch
1 x Photo resistor
1 x Temp and Humidity
1 x Analog Hall
1 x Hall Magnetic
1 x TEMP
1 x Analog Temp
1 x IR Emission
1 x IR Receiver
1 x Tap module
1 x Light Blocking



Resources:

We found a nice tutorial that covers most of the sensors here
We found this article explaining what the sensors are used for: http://www.instructables.com/id/Arduino-37-in-1-Sensors-Kit-Explained/?ALLSTEPS
Use this kit as inputs for sensing and outputs for reporting in your projects. Compatible with all models of Arduino and Raspberry Pi
R329.90  Inc VAT
9Pcs MQ2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Sensor Module kit (gas sensor kit)
Features:

MQ-2:
Detection concentration: 300-1000ppm(combustible gas).

MQ-3:
Used in motor vehicles and other no drunken drivers homework personnel on-site testing, also used in other places of ethanol vapor detection.

Feature:
Size: 32 x 22 x 27mm
Main chip: LM393, ZYMQ - 3 gas sensors
Working voltage: DC 5V
1, With a signal output instructions.
2, Two-way signal output (TTL level output and analog output)
3, TTL output signal for low level effectively.(when the low output electric signal lights at ordinary times, can be directly by single chip microcomputer)
4, Analog 0 - 5V voltage, the higher the concentration, the higher the voltage.
5, To ethanol steam has a high sensitivity and good selectivity.
6, In June and has long service life and reliable stability.
7, Rapid response recovery features.


MQ-4:

1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, The analog output voltage, the higher the concentration the higher the voltage.
5, Methane, natural gas has better detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-5:

Suitable for home or industrial on LPG, natural gas, coal gas monitoring devices. Excellent resistance to alcohol, smoke interference.

Module Features:
1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, The analog output voltage, the higher the concentration the higher the voltage.
5, For gas, natural gas has better detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32* 20 * 22
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-6:

Suitable for domestic or industrial on LPG (liquefied petroleum gas), butane, propane, LNG (liquefied natural gas) detection devices. Excellent resistance to ethanol vapor, smoke interference.

Module Features:
1, Using high-quality dual-panel design, with power indicator and TTL signal output instructions;
2, With a DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module)
4, 0 ~ 5V analog output voltage, the higher the concentration the higher the voltage.
5, The propane, butane, LPG, LNG has a good detection sensitivity.
6, There are four screw holes for easy positioning;
7, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
8, With a long service life and reliable stability
9, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-7:

For home, carbon monoxide detection device environment. Suitable for carbon monoxide and gas detection.

Module Features:
Detection of concentration: 10-1000ppmCO
Loop voltage Vc: <=10V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC(high)
Load resistance: adjustable.
Heater  resistance RH: 31ohm ± 3 ohm(room temperature)
Heater power consumption PH: <=350mW

Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V; Vh(high):5.0V±0.1V
                                   Vh(low):1.5V±0.1V

1, The analog output voltage, the higher the concentration the higher the voltage.
2, The carbon monoxide detection with better sensitivity.
3, There are four screw holes for easy positioning;
4, Product Dimensions: 32 (L) * 20 (W) * 22 (H)
5, With a long service life and reliable stability
6, Rapid response and recovery characteristics
 
Electrical properties:
Input voltage: DC5V power (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 5V)
AO output :0.1-0 .3 V (relatively clean), the highest concentration of voltage around 4V

MQ-8:

Suitable for domestic or industrial hydrogen leak on a monitoring device. Are not subject to ethanol vapor, soot, carbon monoxide and other gases interference.

MQ-9:

For home or factory gas leak detection device, suitable for carbon monoxide, combustible gas monitoring device.

Can test carbon monoxide: 10 to 1000ppm CO
Combustible gas range: 100 to 10000ppm

Module Features:
Loop voltage Vc: <=10V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC
Heater resistance: 31 ohm ± 3 ohm(room temperature).
Heater power consumption PH: <=900mW
Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V
Vh:5.0V±0.1V
Warm up time: more than 48 hours.

MQ-135:

MQ135 gas sensor is sensitive material used in clean air, low conductivity tin dioxide (SnO2). When the sensor is kept in their environment
The contaminated gas, the conductivity of the sensor with the air pollution gas concentration increases. Using a simple circuit can be changes in the conductivity
Of the concentration of the gas is converted to the corresponding output signal.
MQ135 sensor for ammonia, sulfide, benzene vapor high sensitivity, smoke and other harmful monitor is also very satisfactory. This sensor can detect a
Measuring a variety of harmful gases, is a low-cost sensors for a variety of applications.

Module Applications:
For home, environmental harmful gas detection device, suitable for ammonia, aromatic compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas sensors tested concentration range: 10 to 1000ppm.

Module Features:
Loop voltage Vc: <=24V DC
Heater voltage Vh: 5.0V ±0.2V  ACorDC
Load resistance: Adjustable
Heater resistance: 31 ohm ± 3 ohm(room temperature).
Heater power consumption PH: <=900mW
Sensitive body surface resistance Rs:2K ohm - 20K ohm(in 100ppm NH3)
sensitivity S: Rs(in air)/ Rs(100ppmNH3)>=5
Standard test conditions:
Temperature: 20 degree ± 2 degree
Humidity: 65% ± 5% RH
Standard test circuit: Vc: 5.0V ± 0.1V
Vh:5.0V±0.1V
Warm up time: More than 48 hours.

Package includes:

1 x MQ2
1 x MQ-3
1 x MQ-4
1 x MQ-5
1 x MQ-6
1 x MQ-7
1 x MQ-8
1 x MQ-9
1 x MQ-135
1 x 20pcs 20cm male to female jumper cable
1 x 20pcs 20cm female to female jumper cable

Analog to digital converter not included
Configure and read MQ-x gas sensor
R399.89  Inc VAT
CamJam EduKit 2 - Sensors (CamJam EduKit #2)
Description:

The CamJam EduKit #2 is the latest edition to the EduKit family!

The kit is accompanied by a set of (currently 6) downloadable worksheets (or lesson plans for you educators!) that will take you through a series of exercises and projects, teaching you how to make the most of your kit. Whats best is that there is no soldering required, each high quality component is breadboard friendly!

 

All the worksheets are freely available to download from http://camjam.me/edukit

 

Kit Contents:
  • 1 x Breadboard
  • 1 x Immersible temperature Sensor
  • 1 x PIR Sensor
  • 1 x LDR
  • 1 x Active Buzzer
  • 1 x Red 10mm LED
  • 1 x Blue 10mm LED
  • 1 x 4.7K Resistor
  • 2 x 330 Resistor
  • 10 x M/F Jumper Wires
  • 4 x M/M Jumper Wires
  • 1 x Presentation Tin

 

Here are just 4 cool projects you could use the kit for:
  • Make a burglar alarm for your bedroom.
  • Switch on an LED when it gets dark.
  • Have an alarm go off when it’s freezing outside.
  • Test whether the light really does go off in the fridge when you shut the door.

 

Still not convinced? Check out these awesome articles on the kit!

 

The CamJam EduKit is a joint venture between The Pi Hut and the Cambridge Raspberry Jam (CamJam). Profits from the sale of the kit will go to CamJam so that they can continue their educational and community work.
R179.90  Inc VAT
Pi-top 4 - Sensor Foundation Kit (Pi-top [4] Sensor Kit)
Sensor Foundation Kit - Pi-top [4]

Description:

Our Sensor Foundation Kit, a metal ‘bento box’, contains 14 plug & play components you can use with your pi-top [4], including programmable sensors, buttons, and LEDs.

The kit includes our Foundation Plate which attaches to your pi-top [4]. Plug components into the foundation plate and get started right away, following step-by-step tutorials to learn the basics of coding and physical computing. Then continue your learning by progressing into projects in advanced coding, robotics, cybersecurity, and AI.


What's in the box ?

You need a pi-top [4] to use our Sensor Foundation Kit.

The Sensor Foundation Kit includes:

  • 1 x     Foundation Plate
  • 1 x     Sound Sensor
  • 1 x     Light Sensor
  • 2 x     Buttons
  • 1 x     Buzzer
  • 2 x     Potentiometers
  • 2 x   Red LEDs
  • 2 x   Green LEDs
  • 2 x   Yellow LEDs
  • 1 x   Ultrasonic Sensor
  • 8 x   LEGO® Connectors
  • Connecting cables







R1,213.04  Inc VAT
R1,439.90
Grove All In One Beginner Kit for Arduino (Grove Kit for Arduino)

Description:


Note:
 
This kit comes with the Seeeduino -Lotus, Arduino UNO compatible board.

Note: The All In One Beginner Kit is now compatible with Scratch 3.0 graphical programming and there are 16 FREE lessons :) Check it out.




Here is a Video on getting Started :

YouTube : Easy way to start with Arduino



Learning new things is always difficult, and it's the same for Arduino beginners.  You need to learn hardware knowledge, programming code, need to know connection methods of various complex interfaces, and even need to master welding skills. Tons of things are needed before you actually start learning Arduino programming. Well, we feel your pain, so we carry the Grove Beginner Kit for Arduino® from SeeedStudio, it is one of the simplest ways to get started with Arduino.



Unlike most kits, the Grove Beginner Kit for Arduino is an all-in-one kit, no breadboard, no soldering, even no wiring is needed. The kit cuts all those muss and fuss, aiming to give you the best experience, you only need to focus on coding and Arduino Learning. The kit is powered by one Arduino compatible Board (Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board. 



All the modules have been connected to the Seeeduino(Microcontroller) through the PCB stamp holes so no Grove cables are needed to connect. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.



Of course, you can also take the modules out and use Grove cables to connect the modules. You can build any Arduino project you like with this Grove Beginner Kit For Arduino®.





What is Grove?

Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfill a variety of needs. Not only are these open hardware, but also have open-source software.

Note: SeeedStudio also prepared example code and software libraries to help you running 12 different demos in just a few lines of code. Check this Wiki to get started now!

Features:

  • Arduino UNO compatible board(ATmega320p based Seeeduino Lotus)  10 most commonly used Arduino modules
  • All modules are pre-wired, no breadboard and jumper cables required
  • 74 pages PDF wiki 12 step by step project tutorials
  • Super friendly to beginner and STEAM education
  • Compatible with over 300 Grove modules

Hardware Overview :


What's in the box?

  • Included in Kit:
    • Grove Beginner Kit For Arduino Board x 1
    • Micro USB Cable x 1
    • Grove Cables x 6
  • Included on the board:
    • Grove - LED x 1
    • Grove - Buzzer x 1
    • Grove - OLED Display 0.96" x 1
    • Grove - Button x 1
    • Grove - Rotary Potentiometer x 1
    • Grove - Light x 1
    • Grove - Sound x 1
    • Grove - Temperature & Humidity Sensor x 1
    • Grove - Air Pressure Sensor x 1
    • Grove - 3-Axis Accelerator x 1
    • Seeeduino Lotus x 1

Resources:


R629.90  Inc VAT
Grove Base Kit for Raspberry Pi (grove base kit for pi)
Description:

The Grove Base Kit for Raspberry Pi is one of the best kits for beginners to get started with Raspberry Pi. No troublesome soldering and no complicated wiring. You can focus on learning Raspberry Pi. This kit includes a Grove Base Hat for Raspberry Pi and 10 Grove modules, which covering the sensor, actuator, and display. All you need to do is following the demo, plug the module into the Grove Base Hat, truly plug and play.


On top of that, we have provided you with detailed instructions on the use of Raspberry Pi and the use of each module, which including 8 lessons for the module. Just click the wiki to view the user manual. Also, you can check the video guide here, which will tell you how to use this kit step by step.

All in all, whether you are a student, teacher, artist, hardware enthusiast, and so on, with the help of the Grove Base Kit for Raspberry Pi,  you will get to know Raspberry Pi quickly and comprehensively.

For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your use of the product.

Features:

  • A great kit for Raspberry Pi beginner to get started
  • With Grove modules, no wiring is necessary
  • Plug and Use module
  • Include 10 Grove modules and a Grove base for Raspberry Pi

Now the kit comes with the Grove Base Hat for Raspberry Pi, making Raspberry Pi compatible with the Grove System.

The Grove Base Hat for Raspberry Pi provides Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of build-in MCU, a 12-bit 8 channel ADC is also available for Raspberry Pi.


Grove Base HAT Features:


Packing List:

  • 1 x Grove Base Hat for Raspberry Pi
  • 1 x Grove - Red LED Button
  • 1 x Grove - Buzzer
  • 1 x Grove - Moisture Sensor
  • 1 x Grove - Temperature & Humidity Sensor (DHT11)
  • 1 x Grove - Light Sensor
  • 1 x Grove - mini PIR motion sensor
  • 1 x Grove - Ultrasonic Ranger
  • 1 x Grove - Relay
  • 1 x Grove - Servo
  • 1 x Grove - 16 x 2 LCD (White on Blue)

Resources:

R799.90  Inc VAT
433 Mhz Superheterodyne RF Receiver and Transmitter Modules (tx rx modules 433mhz)
Description:

The kit includes one pair of transmitter and receiver modules and one pair of spring antennas for increasing the communication distance. The frequency is 433MHz. It is very popular for remote control systems, such as Remote control rolling gates, robotics, smart home, etc.

Short antenna for Transmitter
Long antenna for Receiver

About the transmitter module (square shape):

Model: WL102-341
Material: Plastic Metal
Color: shown as pictures
Size: 16×12×1mm
Operating frequency: 433.92 MHz
Mains input voltage range: 2.0V-3.6V
Shutdown mode current is less than 1uA
Transfer rate: up to 20KHz
Launch distance: 20-100 meters
External antenna: 25cm ordinary multi-core or single-core line
Temperature range: -45℃~85℃

About receiver module (rectangular shape):

Model: RX470-4 (RX470-4 is WL101-341 upgraded version, more stable performance, faster data transfer)
Material: Plastic Metal
Color: shown as pictures
Size: 30×9×1mm
Operating frequency: 433.92 MHz
Mains input voltage range: 2.2V-5V
Working current: Type: 2.1mA (Requirement:VDD=5V) ; Type: 2.1mA (Requirement:VDD=3V)
Quiescent Current: 1uA
Temperature range: -40℃~85℃
External antenna: 32cm single core wire, wound into a spiral

What's in the box?

1 x 433MHz RF transmitter module
1 x 433MHz RF receiver module
2 x 433MHz spring antennas (Short antenna for Transmitter; long antenna for Receiver.)

Resources:

Configure and read a 433Mhz RF Transmitter With Receiver on the Raspberry Pi
R24.90  Inc VAT
Per Page      1 - 7 of 7
  • 1