Zero Cables/Adapters/Headers

Raspberry Pi Zero related cables,headers and adapters
Sort By:  
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage.
R40.55  Inc VAT
These header pin blocks use the industry standard spacing of 2.54mm. Ideal for Pi ZERO
R4.50  Inc VAT
Want to hook your Raspberry Pi Zero up to your HDMI Monitor? You'll need this Mini-HDMI to full size HDMI adaptor!
R19.90  Inc VAT
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
R34.90  Inc VAT
Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
R139.90  Inc VAT
Official Mini HDMI Male to Standard HDMI Female Cable 10CM White for Zero (mini hdmi adapter 10cm)
Description:

Already have a standard HDMI cable? This handy adapter is what you need to connect to your Raspberry Pi Zero mini HDMI adapter.

What's in the box?

1 x 10cm mini HDMI adapter
Coming Soon. Login and add this item to your wishlist to be notified when stock arrives. Pricing is estimated at this stage.
R40.55  Inc VAT
Official Raspberry Pi USB A male to Micro B 1M (Red 1m micro usb cable)
Description:

The USB to Micro USB Cable is 1m long manufactured by Raspberry Pi. This cable can be used in conjunction with a USB mains charger or Computer USB port to power your Raspberry Pi.

Specifications:
  • 1m Long
  • Colour: Red
  • Connector Type A: USB 
  • Connector Type B: Micro USB
Contents:
  • 1 x USB A male to USB micro B male 1m
R24.90  Inc VAT
Zero Adapter Kit With Official Raspberry Pi Adapters (Zero official adapter kit)
Description:

This adapter kit was created for the Raspberry Pi Zero. It includes all the adapters you need to get your Raspberry pi Zero going.

What's in the box?

1 x pin header 2x20
1 x Official Raspberry Pi male mini HDMI to female HDMI adapter
1 x Official Raspberry Pi OTG male micro USB to female USB A adapter
R39.90  Inc VAT
2.54mm Pitch Double Row Pin Header 40 PIN(2x20) Black (2x20 pin double row m2m header straight)
Description:

2x20 pin double row header male to male

These header pin blocks use the industry standard spacing of 2.54mm and are designed for soldering directly into printed circuit boards (PCB's).

Ideal for:
  • Pi Zero
  • Electronic projects
  • Printed circuit boards
Specifications:

  • Gender: Male
  • No. of Contacts: 20
  • No. of Pins: 20
  • Termination: Straight Pins Solder Tail
  • Size: 2.54mm
  • Row Positions: Double Row
What's in the box:

1 x Double Row Pin Header 40 PIN
These header pin blocks use the industry standard spacing of 2.54mm. Ideal for Pi ZERO
R4.50  Inc VAT
2.54mm Pitch Single Row Pin Header 40-PIN - Black (40 pin single m2m header)
Description:

40 pin single row header male to male
These headers easily cut to size if needed

Ideal for:
  • Arduino
  • Pi Zero
  • Electronic projects
  • Printed circuit boards
Specifications:

  • Gender: Male
  • No. of Contacts: 20
  • No. of Pins: 20
  • Termination: Straight Pins Solder Tail
  • Size: 2.54mm
  • Row Positions: Single Row


What's in the box:

1 x Single Row Header 40-PIN
R2.90  Inc VAT
Pi Zero HDMI Adaptor White (Mini HDMI to HDMI) (HDMI f 2 HDMI mini m white)

Description:

Want to hook your Raspberry Pi Zero up to your HDMI Monitor? You'll need this Mini-HDMI to full size HDMI adaptor!

This one's in white, and comes with gold plated connectors!

Adaptor Guide:

Pi Zero ==> Mini HDMI (Male) to HDMI (Female) Adaptor ==> HDMI Cable ==> Monitor

Features:

  • Mini HDMI Male to HDMI Female
  • Gold plated connectors for flawless signal transference
  • CE and ROHS Compliant
  • For the Raspberry Pi Zero
Want to hook your Raspberry Pi Zero up to your HDMI Monitor? You'll need this Mini-HDMI to full size HDMI adaptor!
R19.90  Inc VAT
Pi Zero micro USB to USB A Adapter White (Zero USB adapter)
Description:

This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port so you can plug in your mouse, keyboard or any other required peripherals! It's an OTG (on-the-go) host cable, which means your Zero can act as a host (master) or client (slave) device! This one's in white!

Features:

  • Micro USB B (Male) to USB A (Female)
  • OTG On-The-Go Host Cable
  • CE and ROHS Compliant
  • For the Raspberry Pi Zero
This Pi Zero USB Adaptor converts the Zero's Micro USB B Port to a full sized USB A port
R19.90  Inc VAT
GPIO Hammer Header Jig Kit(Solderless) (hammer header jig kit)
Description:

Raspberry Pi Zero not included!

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.

Male Female Installation Jig

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two nylon bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

Loose Male hammer headers are also available.

Tutorial on using the jig

Watch our demo of how to fit the hammer headers on Bilge Tank, below.

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.
R139.90  Inc VAT
Pi Zero USB Stem (zero usb stem)
Description:

The Zero Stem uses the test points underneath your Pi Zero to attach a full-sized USB connector. Convert your Pi Zero or Pi Zero W into a convenient USB dongle.

Just plug it into a free USB port and you can connect to your Pi over USB ethernet and share your computer's internet connection without any additional cables or power supplies.

Zero Stem is soldered onto the bottom of your Pi Zero and secured with bolts, making it convenient to use on the go. Use it to create your own little plug-and-play virtual machine, VNC server, proxy server or combine several into a cluster.

Kit includes:

  • Zero Stem PCB
  • USB connector
  • Nylon bolts and nuts

Details:

  • Compatible with Pi Zero V1.3 (with camera connector) and Pi Zero W.
  • Not compatible with Pi Zero v1.2 (without camera connector)!
  • Supported in Raspbian Jessie Pixel and Lite
  • Setup needed (see below)
  • Requires soldering!

Assembly and Installation:

Visit https://zerostem.io/installation/ for complete assembly instructions.

Preparing Raspbian:

Thanks to Andrew Mulholland for writing up these instructions, which you can find in this GitHub Gist.

In short:

  • Flash your SD card as usual using Etcher or Win32DiskImager
  • Open up the "boot" partition and edit "config.txt", adding "dtoverlay=dwc2" to the bottom
  • Open up "cmdline.txt" and add "modules-load=dwc2,g_ether" after "rootwait"
  • Create a new file named "ssh" in the boot folder

Pop your newly set up SD card into your Pi Zero, plug it into a USB port and you should be able to SSH in to "raspberrypi.local", you will need Bonjour, iTunes or Quicktime installed in Windows or Avahi Daemon in Linux for this to work.

As Seen On Bilge Tank

Convert your Pi Zero or Pi Zero W into a convenient USB dongle.
R129.90  Inc VAT
GPIO Hammer Header Male (Hammer Header Male only)
Description:

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! your header is securely attached to your Pi Zero or pHAT.

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the job. They come in male and female flavours, and use crafty little retaining nubbins to grip tightly into the holes on the PCB.

The installation jig kit contains two acrylic base pieces, onto which your Pi Zero or pHAT sits, two steel bolts, an acrylic top piece onto which you hammer, and both a male and female header. Make sure you carefully read our guide for fitting hammer headers.

We strongly recommend using our installation jig! If you want to try without it then godspeed to you but it is a delicate and tricky process! The female headers are simpler to insert than the male headers as you can hammer straight onto the plastic of the header, but the male ones are particularly tricky without the jig.

Please note: we can't be held responsible for any damage that you may cause to your Pi Zero, pHAT, fingers, or headers while fitting them. If you follow our guide carefully then you should be fine. If this worries you, then get yourself a soldering iron instead!

R34.90  Inc VAT
Colour-coded GPIO Header for Pi Zero (Colour coded header 40 pin)

Description:

Colour-coded GPIO pins that make locating that ground or power connection you need super simple!

These 40-pin 2x20 male headers from our friends at The Pi Hut can be used on a Raspberry Pi Zero and are colour-coded for your prototyping convenience.

You'll never have to search for a ground pin again!

The colour coding is nice and simple:

  • Red = 5V
  • Yellow = 3V3
  • Black = GND
  • Blue = DNC (Reversed I2C)

For hard-mode try installing the header the wrong way round and throwing away your normal pin reference! ;-)

Specifications:

  • Gender: Male
  • No. of Contacts: 20
  • No. of Pins: 20
  • Termination: Straight Pins Solder Tail
  • Size: 2.54mm
  • Row Positions: Double Row



What's in the box:

1 x Colour-coded GPIO Header

R18.90  Inc VAT
Official Raspberry Pi standard HDMI to mini HDMI Cable 1m White for Zero (Zero white mini HDMI 1m)

Description:

The Raspberry Pi Foundation Official HDMI cables are now available from PiShop! Designed to offer optimal performance and functionality from the Raspberry Pi Zero, they're gracefully branded with the Raspberry Pi logo, made with ultra high quality materials and built to a world class specification. Triple layer shielding and nickel plated contacts ensure maximum signal transfer.

The Official Raspberry Pi HDMI Cables Feature:

  • Standard HDMI Male to mini HDMI Male
  • 30/6.0 HDMI cable full 19 1pins, 30AWG, 6.0MM
  • Nickel Plated Contacts for Optimal Contact Performance, Maximum Signal Transfer and Corrosion Resistance
What's in the box:

1 x HDMI to mini HDMI Cable 1m
R49.90  Inc VAT
Dedicated Aluminum Heatsink for Raspberry Pi Zero Series, Zero / Zero 2 W (dedicated heatsink for zero )
Description:

Aluminum Heatsink For Zero Series
Dedicated Aluminum Heatsink, Corrosion / Oxidation Resisting, Better Heat Dissipation



Tailored For Raspberry Pi Zero Series
Matching With The Zero On Size And Mounting Holes, Fast Heat Dissipation



Used With Zero Boards



for reference only, Zero is NOT included.

Outline Dimensions



* measured manually, for reference only.

How To Install

Assembly on Raspberry Pi Zero 2 W



Assembly on Raspberry Pi Zero



Specifications:

Weight: 0.028 kg


What's in the box?

  1. Zero-HEATSINK x1
  2. Thermal tapes 3PCS x1
  3. Mini cross wrench sleeve x1
  4. Screwdriver x1
  5. Screws pack x1
1  2  3  4  5 
R56.90  Inc VAT
3 Port USB Hub w/ Ethernet - Micro USB (Pi Zero) (3 port zero hub ethernet)
Description:

Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero? You need one of these adaptors! This one comes with a Micro USB B input, so it plugs directly into your Raspberry Pi Zero without the need for adaptors or shims!

The hub has three full size USB inputs, so you can easily add USB peripherals like mice, keyboards and WiFi to your Zero! There's even a plug and play RJ45 Ethernet port, so you can get direct network connectivity for your Zero using this hub!

3 Port USB Hub with Ethernet - Micro USB Features:

  • Fully compatible with the Raspberry Pi Zero
  • Micro USB 2.0 Input Port
  • 3 x USB Ports
  • 1 x RJ45 Ethernet Port (10/100)
Want to add three extra USB ports and ethernet connection to your Raspberry Pi Zero?
R139.90  Inc VAT
Per Page      1 - 14 of 14
  • 1