Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
Now available with pre-soldered headers and USB cable
R109.90  Inc VAT
The Raspberry Pi Zero v1.3 comes equipped with a special mini camera port which is smaller than the standard camera connector
R45.39  Inc VAT
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
R84.90  Inc VAT
This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
Geekcreit® MEGA 2560 R3 ATmega2560-16AU MEGA2560 Development Board With USB Cable (2A4 Arduino Mega)
Description:

Arduino compatible R3 Mega2560 ATmega2560-16AU control board with USB cable
Arduino Mega is an ATmega2560 core microcontroller development board. Itself has 54 digital input/output terminals (14 PWM outputs), 16 simulation inputs, 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writers. Supply part of the optional USB power, or external power using a AC-to-DC adapter and battery.
Rapid growth due to open original code, as well as the concept of using Java (cross-platform) C language development environment for Arduino module. The Arduino can easily use the Arduino language with Flash or Processing ... software communication, to make multimedia interactive works. Arduino development IDE interface is based on open-source principles, allows you to download for use in projects.
Power supply design:
There are two options for the power supply system of the Arduino Mega. USB direct power supply or external power supply. The power supply will be switched automatically. External supply AC-to-DC adapter or the battery can be selected on this control panel. Limit the voltage range of 6V ~~ 12V, but if the voltage supplied is less than 6V, I / O port may not be supplied to a voltage of 5V, and therefore not stable; If the voltage is greater than 12V, the regulator device may possibly overheat and damage the Arduino MEGA. It is therefore recommended that for the operating supply of 6.5 ~ 12V, the recommended power supply is 7.5V or 9V.
The development board have been rigorously tested at the factory.

Specification:

Microcontroller: ATmega2560
Operating voltage: 5V
Input voltage (recommended): 7-12V
Digital I/O pins: 54 (of which 14 provide PWM output)
Analog input pins: 16
DC current per I/O pin: 40 mA
DC current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 4 KB is used by the bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16MHz


Getting started with Arduino products

Package includes:

  1 x Control board
  1 x USB cable
R259.90  Inc VAT
Geekcreit® ATmega328P Arduino Compatible Nano V3 Improved Version With USB cable (2A4 Arduino nano and cable)
This Arduino Nano comes with the old bootloader

Specifications:

Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz

Package includes:

1 x Arduino Compatible Improved Version Nano V3.0 with headers pre-soldered
1 x USB cable

Getting started with Arduino products
Now available with pre-soldered headers and USB cable
R109.90  Inc VAT
Official Black 2m Micro-HDMI to Standard HDMI (type A) for Pi4 (Pi4 off Black 2m micro HDMI cable)

Official Raspberry Pi Micro HDMI to HDMI cable, fully licensed by Raspberry Pi and manufactured for the Raspberry Pi 4 Model B.

Perfect for running a dual screen setup with the new Raspberry Pi 4 Model B.

Specifications:

  • 19-pin HDMI Type D(M) to 19-pin HDMI Type A(M)
  • 2m black cable
  • Nickel-plated plugs
  • 4Kp60 compliant
  • RoHS compliant
  • 3Mohm 300VDC insulation, withstands 300VDC for 0.1s


R119.90  Inc VAT
Raspberry Pi Zero Camera Cable - 150mm (zero cam cable 150mm)

The Raspberry Pi Zero comes equipped with a special mini camera port which is smaller than the standard connector for the Raspberry Pi Camera and Noir Camera! So how do you connect to it? With this special camera cable designed specifically for the Raspberry Pi Zero of course! This is an extra long version, with a 150mm total length!

Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras for photo & video fun time!

The Raspberry Pi Zero v1.3 comes equipped with a special mini camera port which is smaller than the standard camera connector
R45.39  Inc VAT
Cat 5e ethernet cable per meter (4B7 Cat5e per meter)
Cat5e is currently the most commonly used in new installations. It's designed to greatly reduce crosstalk.
It basically means the Cat 5e is better at keeping signals on different circuits or channels from interfering with each other.
A step above Cat 5, it can handle 1000 Mbps speeds (gigabit Ethernet) at 100 MHz.

Sold per meter.
Please indicate via the quantity box how many meters you would like to have.
R5.90  Inc VAT
HDMI to DVI-D Cable 1.8m (Gold Plated) (3D1 HDMI to DVI cable)

These 1.8m Gold Plated HDMI to DVI-D cables are the perfect low cost solution to connecting your Raspberry Pi to your DVI monitor or TV. Broadcast quality digital video and inter-component control signals all in one compact, high-performance connection

The 1.8m HDMI to DVI-D Cable Features:

  • Tested for Compatibility with the Raspberry Pi
  • HDMI Male (19 Pin) to DVI-D Male (24 + 1 Pin)
  • 1.8m Long
  • 24k Gold-Plated Contacts Prevents Corrosion for Life-Long Optimum Signal-Transfer
  • 30AWG Wire
  • 3 Year Warranty
  • Dual Link, High-Speed - 1080p Full HD
  • Black PVC Jacket OD 6mm
  • Triple Shielding for Maximum RFI Protection and Ultimate Picture Stability
  • Supports Uncompressed Video Signals
  • Perfect for both High-Definition Video and Standard Video Formats.
  • Fully HDCP Compliant to Provide Highest Level of Signal Quality
  • RoHS Compliant
R109.90  Inc VAT
A/V Composite Cable - 3.5mm to 3 x RCA - 2m (3D1 4Pole-RCA)

Description:

Got a TV with no HDMI input, but still want to hack your Raspberry Pi? Don't worry! The Raspberry Pi Model B+ comes equipped with a neat 4-Way Composite Video/Audio Jack, and we've got just the cable for you!

Plug this cable into your Raspberry Pi's composite 3.5mm Jack, and your Pi will output Video (1-line) and Audio (2-lines) via the three RCA connectors.

Specification:

Connector Layout

  • Red - Video
  • Yellow -  Right Audio
  • Black - Left Audio

Features:

  • Tested for Compatibility with the Raspberry Pi
  • Gold Plated Connectors
  • 3m Long
  • Colour: Black
  • Connector Type A: 4-Way 3.5mm Audio Jack
  • Connector Type B: 3 x RCA Connectors

Contents:

  • 1 x Composite Cable - 3.5mm to 3 x RCA

Resources:

Helpful Tips

  • On first startup (when installing an OS via the NOOBs distribution), hold 3 at boot for PAL, or 4 at boot for NTSC. This will force output via composite insted of HDMI .
  • If you have installed an operating system with an HDMI cable, and want to change to composite hold SHIFT+3 at boot for PAL, or SHIFT+4 at boot for NTSC
R49.82  Inc VAT
Jumper Cables Male to Female ribbon of 40 x 300mm (3A6 male to female jumpers 30cm)

Description:

These premium jumper cables are a little over 200mm long.

Ribbon of 40 mate to female

Specification:

  • 40 x 200mm
  • Male to Female

Features:

  • Tested for Compatibility with the Raspberry Pi
  • Breadboard compatible
  • Colour: Multi-coloured

Contents:

  • 40 x 200mm Male to Female Jumper cables

 


R44.90  Inc VAT
40 PIN IDC SOCKET CABLE MOUNT HEADER (1A5 40-PIN IDC SOCKET)

40-PIN IDC SOCKET CABLE MOUNT

R10.90  Inc VAT
Jumper cables Male to Male Pack of 65 (3A6 65 m2m jumpers)

Description:

These male to male breadboard jumper wires provide an easy way for you to build your own circuitry on a breadboard. These cables are flexible with both ends of a prototyping board connector. The jumper wire is ideal for creating circuits between your microcontroller and breadboard.

Specifications:

  • Random colours: white, yellow, orange, blue, black and red (as shown in picture)
  • Material: plastic + tin plated copper
  • Outer Diameter: 0.643mm
  • Nominal Wire Area: 0.3247 sq. mm

Pack consists of:

  1. 4 x 175mm wires
  2. 4 x 230mm wires
  3. 8 x 125mm wires
  4. 49 x 95mm wires

Contents:

  • 1 x Pack of 65 x Jumper Wires for MB102 Solderless Breadboard

Resources:

R39.90  Inc VAT
Jumper Cables Female to Female Ribbon of 40 x 300mm (3A5 female to female jumpers)

Description:

Female to Female Jumper Wire Cable Line Multicolored 300mm

Specifications:

  • Multicolored
  • 300mm
  • Female to Female

Contents:

  • 1 x Ribbon of 40 lines

Resources:

R54.90  Inc VAT
Raspberry Pi Camera Board Replacement Cable 300mm (2A5 Cam cable 300mm)
The Raspberry Pi Camera Module comes fully assembled with a 15-Way 150mm flat, flex cable that plugs directly in the Raspberry Pi CSI port. Unfortunately the included cable is quite fragile, and can break if twisted or bent too far.
 
Don't worry though, not all is lost if that cable does happen to break! Replacement raspberry pi camera board cables are available and it's very easy to swap them over!
 
This replacement cable is 300mm long.
 
The Raspberry Pi Camera Board Replacement Cable Features:
  • Direct Replacement for the Raspberry Pi Camera Board Cable
  • 300mm Overall Length
  • 1mm Pitch
  • 15 Way Flat Cable
  • Conductor: Tin plated copper
  • Insulation: White PVC
  • Supporting tape: Blue polyester
  • UL rating: UL2896
  • Temperature rating: +80°C
  • Voltage: 30V
  • Flame test: VW-1, FT1, FT2
  • CSA Standard: CAN/CSA-22.2 No.210.2 
R29.90  Inc VAT
Set with 10 cables 42cm 5 colours with booted crocodile clips (3A5 croc jumpers set)

This bundle contains ten leads with crocodile clips at each end
Two of each of five colour cords: black, green, red, white and yellow
The PVC sleeves on the crocodile clips match the colour of the cables

 

This bundle is ideal for use with your micro:bit

R39.90  Inc VAT
Panel Mount - USB A Male to USB A Female (2C2 panel mount USB AmAf)

This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. It's short (10cm between connectors), so perfect for mounting your Raspberry Pi, Beagle Bone, Arduino etc. into a box!

The jack half has two mounting 'ears' with M3 screws installed, 8mm apart. The ears are flexible so the holes don't have to drilled very precisely.

Our Panel Mount USB Cable Features:

  • Specially Manufactured for ModMyPi for use with the Raspberry Pi & Other Microcontrollers 
  • Length between connectors: 10cm
  • Colour: Black
  • 28AWG
  • USB A Male to Panel Mount USB A Female
  • M3 Mounting Ears (Two M3 x 6mm Screws Included)
R59.90  Inc VAT
830 Solderless Breadboard + Power Supply + Jumper Cable Kit (1A2 Powered Breadboard kit)
Quick video available on a similar MB-102 power supply at https://www.youtube.com/watch?v=ZpCep1jL-iA

Dimension: 16.7 x 5.7 x 1cm
Tie Points: 830 tie points (consists of: 630 tie-point terminal strips, 200 tie-point distribution strips)
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Jumper size: Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires

MB-102 Power Supply Module:

Input voltage: 6.5V ~ 12 V DC / USB power supply
Output voltage: 3.3V / 5V select with jumpers
Maximum output current: <700mA
Fluctuation two road independent control, can switch over to 0V, 3.3V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use
Size: 5.3 x 3.2 x 2.5cm

Jumper Cables:

Breadboard jumper cable male to male
Typically used for electronics projects
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect

Kit includes:

1 x 830 tie point Solderless Breadboard
1 x MB-102 Breadboard Power Supply
65 x Breadboard Jumper Cables male to male
R129.90  Inc VAT
120Pcs 10cm Breadboard Jumper Cable Kit (3 jumper kit 10cm)
Description:

40pcs chromatic male to male color jumpers
40pcs chromatic color female to female jumpers
40pcs chromatic male to female color jumpers
Durable and reusable
Easy to use
A popular choice for constructing electronic projects
Use for electronic projects as including Raspberry Pi and Arduino projects

Specifications:

Length 
:10cm
Compatible with 2.54mm spacing pin headers and breadboards

 Kit includes:

1 x ribbon of 40pcs male to male jumpers
1 x ribbon of 40pcs female to female jumpers
1 x ribbon of 40pcs male to female jumpers
R49.90  Inc VAT
DC 9V 1A Battery Button Power Cable Tieline For Arduino (C52 9VDC Batt arduino power clip)

Description:

This is a DC 9V Battery Button Power Cable Tieline For Arduino

Barrel adapter is negative on the outside

Package includes:

1 x DC 9V Battery Button Power Cable 
R9.90  Inc VAT
Micro SD to SD Extension Cable 45cm (C5 micro to SD ext cable)

This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access, or mounting your Raspberry Pi safely within an enclosure!

Micro SD to SD Extension Cable Features:

  • Micro SD Card Male to Full Size SD Card Female
  • SD Card Plastic Housing Case: 51mm x 35mm x 11mm
  • Flex Cable ~ 45cm
  • Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
  • Supports SD/SDHC/SDXC Cards
  • Push/Push SD Card Slot
This micro SD card to SD card extension cable is perfect for protecting your Raspberry Pi's micro SD card port.
R84.90  Inc VAT
White Nylon Zip Cable Tie Label Strap Strip With Marking Tag 3X100mm(100 pack) (1C3 label cable ties 100)
Description:
Material:nylon
Color:white
Cable Size:100mm x 3mm(L*W)
Tag Size:20mm x 13mm(L*W)
Quantity:100pcs

Features:
Nylon cable tie label
Made from high quality nylon 66 material, UL recognized
Durable,acid-resistance, anti-rust,anti-aging,insulating
Unique marking tag design, enable you to mark the different cables when connected, easy to recognize.
Widely used in bundled cables for TV, computer, appliances, lighting, electrical, electronic toys and other products lines

Package includes:
100 x Nylon Zip Cable Tie Labels
R109.90  Inc VAT
Raspberry PI Camera Cable Joiner/Extender (2A5 Cam cable joiner/extender)

PLEASE NOTE: Pic is for demonstration purposes only
Ribbon Cables are NOT included, this is the adaptor board only!


This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable on Raspberry Pi B/B+/2/3 and Pi Zero using multiple cables!

The Raspberry Pi camera module comes with its own 30cm cable to connect to the Pi, but sometimes that's simply not long enough. This lovely little board lets you add extension cables to your existing camera cable, giving you as much range as you'll need!

Features:

  • 1mm Pitch
  • 15 Way Flat Cable Connector Female to Female
  • Designed for Raspberry Pi Camera Cables

Raspberry Pi B/B+/2/3 - You will need 2 standard Raspberry Pi Camera Cables + One Extender Board.

Raspberry Pi Zero -You will need one Pi Zero Camera Cable + Standard Raspberry Pi Camera Cable + One Extender Board.

This neat little adapter board is designed to join two Raspberry Pi Camera board cables together, allowing you to extend the length of the camera cable.
R64.90  Inc VAT
Per Page      1 - 20 of 103