Search
Search Criteria
Products meeting the search criteria
Photosensitive resistance is the resistance of a semiconductor material, the conductivity change when light intensity varies.
Photoresistors are widely used in toys, lamps, cameras and other industries.
Specifications:
Model: GL5516
Maximum voltage: 150V, DC
Maximum wattage: 90mW
Operating temperature: -30°C ~ 70°C
Spectral peak: 540nm
Bright resistance (10Lux) (KΩ): 5 - 10
Dark resistance: 0.5 MΩ
100λ10: 0.5
Response time: 20ms (Rise), 30ms (Down)
Resistance illumination: 2
Package includes:
2 x Photoresistors - GL5516
Read the Docs
Comes with an I2C breakout board at the back. This allows you to use only 2 of your controller pins to be able to communicate with your screen, leaving the rest for other things.
Specifications:
Power supply voltage: 2.5 - 6V
Supports I2C
Blue back light, contrast can be adjusted
CCPM Servo Consistency Master/Servo Tester is a device that can be effectively used to test up to three servo motors at the same time. It is a useful tool to test Servo motors, ESC, and can be used to determine the motor directions.
This clever little Servo Tester Module has three modes to check the reaction times, neutral points and maximum angles for up to 3 servos simultaneously.
Specifications:
Item Name: Servo Tester
Size: 46x32x17mm
Weight: 8g
Color: Blue
Input: DC 4.2 to 6.0V
Output: ≤15mA (5.0)
Output signal: 1.5ms±0.5ms
Adjustment Methods: Manual, Neutral, Automatic.
Features:
Small size,low power consumption,high reliability and easy operation.
It can easily detect and configure server virtual bit, jitter and middle position.
Can connect two servos or ESC;
MCU control,good stability,high accuracy.
Note:
This product can't test a servo with a weight more than 55g.
If you want to test the motor,please first connect the ESC.
Package Includes:
1x servo tester
This is an excellent lightweight plastic tank frame used for the manufacture of tank toys or robot projects. It has a good shock absorption effect, you can press up to 0.7cm on it. With a general 130 motors which you can replace with the same high quality motor. This plastic tank frame supports a voltage of 3V to 7V and can be used with many systems.
Features:
1. Only 166g in weight
2. Good damping effect, you can press down to 0.7cm
3. With general motors 130, support 3-7V voltage
4. With the DC charging port at the bottom of the tail
Specifications:
- Size: wide 9.7cm* long 18.5cm* high 5cm
- Voltage: 3-7V
- Motors: 130
- Weight: 166g
1x Tank Robot Chassis
Read the Docs
10Pcs Five Colors 10mm Round Bright Light LED Assortment Kit | ||||
Color | Size | Current(mA) | Lens Color | Quantity |
Red | 10mm | 20 | red | 2Pcs |
White | 10mm | 20 | white | 2Pcs |
Yellow | 10mm | 20 | yellow | 2Pcs |
Green | 10mm | 20 | green | 2Pcs |
Blue | 10mm | 20 | blue | 2Pcs |
Resources:
Python library
Introduction
Rainproof performance, making it more suitable for outdoor weather conditions. To turn on or off the light in day and night without manual operation.
Adjustable sensitivity and photoreceptor
Do not install the control unit in a place extremely darker in daytime, or a place directly by lighting of turning - ON lamp.
Common uses: street light, highway, factories, garden, ports, airports, farm, parks, schools, and other places.
Specifications:
Product: light control sensor
Power source: 220V
Rated Current: 10A
Ambient temperature: max 55 (C)
Package includes:
1 x 220V 10A Waterproof Automatic Light Sensor Controller for eg. Garden Lights
-WiFi wireless light holder that can connect to various light bulbs with E27 screw base.
-It sends data to cloud platform through WiFi Router, which enables you to remotely control all light bulbs with the App eWeLink on your smart phone.
-It makes all lights smart, as long as your phone has network you can remotely turn on or turn off your lights from anywhere at any time. And by setting timing schedules for your lights, you can maintain a carefree life.
-The App eWeLink enables you to control your devices easily. You can download the iOS version in App Store and the Android version in Google Play.
Specifications:
voltage:AC100-250V(50/60Hz)
max current:2A
operating current:1A
max wattage:400W
color:White
humidity:5%-95%
wireless frequency:2.4Ghz
Features:
Support WiFi network
Support status tracking, devices' status will timely feedback to your App
Support Max 8 timing tasks for each added device
Support numerous WiFi smart light holders one smart phone
Easy installation, easy handling and can be activated immediately and stably
Note:433Mhz RF remote and Light bulb is not included.
Package Includes:
1 x e27 wifi light holder
Great beginning point to get started with LEDs, and speaking to the outside world with electronics
Small red security alarm signal emergency warning strobe light excluding the mounting bracket. It can be used for anti-burglary alarm signal indication, entrance and construction site warning lights and other similar applications.
Specification:
Rated voltage: 12V DC
Rated current: 120mA
Strobe rate: 90s / minute
Diameter: 7.2cm
Height: 4cm
Lamp cover color: red
Features:
Led strobe flashing light
Suitable for security, status etc...
Also ideal for construction site as a warning light
Note:
This product only has a flashing light, no sound.
Package includes:
1 x Alarm Signal Lamp
2 x Bases
4 x Screws
Are you interested in saving energy? These new Recessed PIR motion/ occupancy sensor is perfect way to start saving energy and also on your bills.
Specifications:
Voltage:AC220-240V/50Hz
Load:800W (incandescent bulbs, halogen bulbs)/200W ( energy saving lamp, fluorescent lamp, LED bulb)
Detection Angle: Ceiling Installation 360°/Wall Mounted 140°
Sensing Distance: Max 8M (24°C) Adjustable Distance
Delay Time: 5S, 30S, 1Min, 3 Min, 5 Min, 8 Min Time Adjustable
Light Control Settings: 10 ~ 2000Lux Light Control Adjustable
Package Includes:
1 X PIR Ceiling Light Switch
Handy device for testing LED's. Simply plug your LED into the correct holes (all of which are marked) and push the button to see its brightness, illuminant color, etc.
Handy device for testing LED's (2-150mA)
The top row is for 2 pin LED's with currents ranging from 2mA - 30mA
The bottom row is for 4 pin LED's (piranha LED's) with currents ranging from 20mA - 150mA
Specifications:
Material: Plastic
Color: White
Lightweight & compact
Powered by a 9V battery (not included)
What's in the box?
1 x LED tester
Item size(L*W*H) : Approx. 80mm x 55mm x 22mm
Quantity: 1PC
The Pi-Stop is a low cost hardware module designed to allow Raspberry Pi users to take their first steps into interfacing with the real world.
Designed with the learning in mind, everyone will recognise and identify its familiar elements encouraging their use along-side their own projects.
Move past the Stop light
The Pi-Stop is designed to remove many of the common hurdles people are faced with when getting started using hardware with the Raspberry Pi. Often it is difficult to know what components to use and how to connect them, the Pi-Stop makes it simple by plugging directly onto pre-set positions on the Raspberry GPIO connector.
By plugging the Pi-Stop directly on to the Raspberry Pi GPIO header, no extra cables or wires are needed. Unlike many other add-on boards, they do not block unused GPIO pins, keeping them open for other uses. The Pi-Stop can be fitted in 4 standard locations, allowing up to four Pi-Stops to be controlled independently or combined with other hardware.
Prepare to go!
The Pi-Stop provides a simple stepping stone, between pure screen based programming and using physical hardware to interact with the real world. Components like the Pi-Stop will provide a flexible and non-restrictive way to build understanding through experimenting.
Since it is only a step away from a bag of components, it also allows the programming of hardware to be introduced, and the electronics involved can be introduced separately, if desired. Allowing the pupils to discover they can control real things, and then again to discover they can also build their own circuits and control them in exactly the same way.
Often, people are faced with a magic board which they plug in and tell it to do stuff, however it isn't always clear to them why or how it does it. By providing something which they can remove and replace with something (apparently) completely different (- wires, breadboards and LEDs) they will be able to understand the link.
By keeping the hardware very simple, it allows better understanding of what is happening, and allows space to come up with your own projects and apply the concepts with your own ideas in mind.
GO Full throttle
The documentation and guides are openly available for the Pi-Stop for educational use. There will be guides, tutorials and workshop material available all of which can be taken as is[available as PDF format] or adapted to your own needs [available in markdown format].
It is encouraged that similar materials can be submitted back for others also to share and make use of.
The materials will demonstrate the concepts, methods and provide the building blocks to explore ideas and take learning further by with creative projects, activities and games.
Pi-Stop Documentation
The following material is available (in both PDF and markdown format):
- Discover: The Pi-Stop: Learn what the Pi-Stop is and how to use it.
- Setup: Scratch GPIO: Get up and running with Scratch GPIO ready to use with the Pi-Stop.(pdf)
- Explore and Challenge Scratch GPIO: Pi-Stop First Steps: If you've not used Scratch before, this will provide a quick introduction to building your first Scratch GPIO program. (pdf)
- Explore and Challenge Scratch GPIO: Pi-Stop Traffic Sequence - Create your own traffic light sequence and learn how to use Scratch GPIO with the Pi-Stop. (pdf)
- Explore and Challenge Scratch GPIO: Pi-Stop Reaction Game - How fast are your reflexes? Test your reaction time with the Pi-Stop Reaction game. (pdf)
- Explore and Challenge Scratch GPIO: Pi-Stop Simon Memory Game - Challenge your memory and get the highest score! (pdf)
Description:
- Influence control: Light Infrared PIR
- Two light modes:all day/at night(Auto switching on when detecting people coming.)
- Super energy saving, super sensitivity within 7 meter distance.
- Built in light sensor which can identity day and night by itself,
- Sensor sensitivity distance: ≥7m
- Sensor sensitivity angle: 145°
- Load current:10A
- Working voltage:DC 5V-30V
- Delay time: If people leave, light will delay 30s-150s(Adjustable) to turn off
- Certificate: CE
- Suitable for use in homes, wardrobes, kitchens, stairs, camping tents...
- Size:50mm x 43mm x 20mm(approx)
- 5.5 x 2.1mm male to male cable length:1M(approx)
- 5.5 x 2.1mm male to female cable length:1M(aprpox)
- Color:Black
- 1 x PIR sensor
- 1 x 5.5 x 2.1mm male to male cable
- 1 x 5.5 x 2.1mm male to female cable
This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available.
They're even washable (with special care)!
Specifications:
- Operating voltage: 3-5V
- Operating current: 40MA
- Weight: 1g (5 by one weight)
- Size: 12.7 mm x 5.2mm x 2.2mm
Package Includes:
10 X LilyPad Led Module
Documents:
This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.
Alternatively it can be used as a night safety product or flashing eyes.
Features:
- Easy build kit making a great introduction to electronics.
- Great visibility for night time safety.

Contents:
- 1 x 2xAA Battery Cage with Leads.
- 2 x 470K Resistor.
- 1 x 33R Resistor.
- 2 x Capacitor, Electrolytic, 16V, 10uF.
- 2 x BC547 NPN Transistor.
- 2 x Red 5mm Water Clear LED - 30deg - 1000mCd.
Dimensions:
- Length: 48.5mm.
- Width: 25.5mm.
Requires:
- 2 x AA Batteries.
- Soldering Iron.
- Solder.
- Wire Cutters.
Resources:
- Click here to download the essential information
- Click here to download the full teaching resources
- Autodesk Files.
- 3D CAD Files.
This easy build bike light kit has just ten parts, making it a good introduction to electronics. The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light. Making it ideal for use as a rear bike light.
Alternatively it can be used as a night safety product or flashing eyes.
Caution:
- This is an educational kit and should be used in conjunction with a commercially available bike light.
The Kitronik Deluxe Rear Bike Light Kit is easy to build kit and is an excellent way to learn about the very popular 555 timer IC. The kit uses four ultra bright LEDs that can be operated in two modes; constant and flashing.
A key design aim of the kit was that it should conform to all relevant British Standard measures. Both the flash rate and brightness conform to British Standards for vehicle road lighting (2005), making it ideal for use as a rear bike light. Alternatively, it can be used as a night safety product or flashing eyes.
During testing we connected the kit to 3 x AAA batteries and ran it continuously. At 80 hours of continuous use the LEDs were still lit at full brightness. After 107 hours, although still lit, the brightness had dropped below the level at which you would want to use them. So, we estimate that with brand new batteries you could comfortably run the light for 2 hours of daily commuting for at least an entire month with the LEDs still at full brightness.
Features:
- An easy to build rear bike light project that conforms to British Standards for vehicle road lighting (2005) for both brightness and flash rate.
- Learn about the very popular 555 timer IC.
- The kit features 4 x bright LEDs.
- It has two operating modes; continuous and flashing.
- Its compact design makes it the ideal choice for designing custom enclosures.

Contains:
- 4 x Red 5mm Water Clear LED - 30deg - 9500mCd.
- 1 x On-Off-On Slide Switch.
- 1 x Capacitor, Electrolytic, 50V, 1uF.
- 1 x Capacitor, Ceramic, 50V, 10nF.
- 1 x 220K Resistor.
- 2 x 1K Resistor.
- 4 x 100R Resistor.
- 1 x BAT41 Signal Diode.
- 1 x 2N7000 N Channel FET.
- 1 x IC Socket 8 Pin.
- 1 x NE555 Timer IC.
- 1 x (3 x AAA) Battery Holder with pre-tinned flying leads.
- 1 x Deluxe Rear Bike Light PCB.
Dimensions:
- PCB Length: 52.6mm.
- PCB Width: 37.6mm.
- PCB Thickness: 1.6mm.
Video: https://youtu.be/KPPh7Nwa1ts
Requires:
- Soldering Iron.
- Solder.
- Wire Cutters.
- 3 x AAA Batteries.
Resources:
- 20x 5mm Green LED
- 20x 5mm White LED
- 20x 5mm Yellow LED
- 20x 5mm Red LED
- 20x 5mm Blue LED
- 20x 5mm Pink LED
- 20x 5mm Orange LED
- 20x 5mm Purple LED
- 20x 5mm Green LED
- 20x 5mm White LED
- 20x 5mm Yellow LED
- 20x 5mm Red LED
- 20x 5mm Blue LED
- 20x 5mm RGB LED (slow flash)
- 20x 5mm RGB LED (fast flash)
The ultimate 3MM LED kit, containing 300 LEDs of various colours/styles in a hardy component box with a secure clasp! Each LED type is packed separately with it's value clearly labelled on the outer pouch.
- 20x 3mm Green LED
- 20x 3mm White LED
- 20x 3mm Yellow LED
- 20x 3mm Red LED
- 20x 3mm Blue LED
- 20x 3mm Pink LED
- 20x 3mm Orange LED
- 20x 3mm Purple LED
- 20x 3mm Green LED
- 20x 3mm White LED
- 20x 3mm Yellow LED
- 20x 3mm Red LED
- 20x 3mm Blue LED
- 20x 3mm RGB LED (slow flash)
- 20x 3mm RGB LED (fast flash)
For a wide range of brightness for 1 lux high precision measurement.
This sensor module is the most suitable to receive the ambient light data for adjusting LCD and other related projects. It is possible to detect wide range at High resolution.
The sensor is a calibrated digital light sensor that measures the intensity of the ambient light and stores it as a 16-bit number.
Specifications:
Type: GY - 302
Size: 13.9 mm X 18.5 mm
The original BH1750FVI ROHM chip
Power supply: 3-5 V
Data range: 0-65535
Sensor built-in and bitad converter
Direct digital output, bypassing the complicated calculation, omit calibration
Do not distinguish between ambient light
Close to the visual sensitivity of spectral characteristics
Package Includes:
1 x GY-302 Module
What's in the box?
1 x GT-7U GPS module
1 x Control board
1 x Header
More info available here