Search Criteria


Products meeting the search criteria

Sort By:  
R224.90  Inc VAT
R255.90  Inc VAT
R389.90  Inc VAT
R229.90  Inc VAT
Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue!
R109.90  Inc VAT
RPIZ_CT3T1 3 current and 1 Temperature 30A AC adapter for Raspberry Pi zero (lec zero 3 current 1 temp)

The RPIZ_CT3T1 is the same unit as the RPICT3T1 in the Raspberry pi Zero format.

Refer to the RPICT3T1 for full documentation.

Use with sct-013-000 split core current sensor and DS18B20 temp sensor

Please note: Raspberry Pi Zero and sensors are not included

R649.90  Inc VAT
RPIZ_CT3V1 3 current and 1 Volt 30A AC adapter for Raspberry Pi zero (lec zero 3 current 1 volt)

The RPIZ_CT3T1 is the same unit as the RPICT3V1 in the Raspberry pi Zero format.

Refer to the RPICT3V1 for full documentation.

Use with sct-013-000 split core current sensor and 230VAC to 9VAC power adapter

Please note: Raspberry Pi Zero and sensors are not included

R679.90  Inc VAT
Wide Angle – Camera Module for Raspberry Pi Zero (zero cam wide angle)

How to use Picamera with Raspberry Pi OS Bullseye:


This minimal camera for the Pi Zero (or Pi Zero W, WH, 2W) is perfect for small camera projects where space is at a premium.

The sensor is 5MP, and the whole shebang is mounted on a flexible circuit board. As such, a little care is needed when handling, just like the connector on the Pi Zero. Easy there, Lennie!

Otherwise it's an economical and svelte solution for bird box cameras, body-cams, home security, and simple computer vision projects.

Now with 160 degree wide angle lens


  • 5MP sensor, 2592x1944 pixels (same as version 1 official Pi camera)
  • 1080p video at 30 FPS (or 60 FPS at 720p, 90 FPS at 480p)
  • f2.9 lens, 3.60 mm focal length
  • 53.50 degrees horizontal, 41.41 degrees vertical field of view
  • Approx. dimensions of circuit and camera: 60 x 11.4 x 5.1mm


  • Only for Raspberry Pi Zero or Zero W with CSI camera port
  • Raspberry Pi Zero not included
What's in the box:

1 x Camera module

Getting started with PiCamera
R329.90  Inc VAT
Raspberry Pi Zero W Case Blue ABS with GPIO Reference (Blue Zero ABS case)
Introduction :

This case is suitable for the Raspberry Pi ZERO range. There is GPIO references on the cover making it a very useful case


1. GPIO reference on the the top of case - you needn't search for the references online.
2. Hole on the buttom of case -   you can mount the case on the wall
3. Translucent color design - make the case more beautiful and you can see the pi in the case
4. Use for Raspberry Pi ZERO range

Specifications :

1. Material : ABS
2. Weight : 17 g approx
3. Size ( L x W x H) : 72mm x 34mm x 17mm approx

Package Includes :

1 x Raspberry Pi Zero Case
R59.90  Inc VAT
Black ABS Shell Case for Raspberry Pi Zero (Shell black zero case)

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside


Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Frosted ABS Shell Case for Raspberry Pi Zero (Shell frosted zero case)

The case is made of ABS , harder than acrylic so it will provide better protection for your raspberry pi zero , and it is not easy to scratch. What's more , there is camera cable hold , sd card hole and a hook hold on the case , convenient to use .

Install Tips:

1.The 2 short screws is used to fix the raspberry pi zero in the case from inside.
2.The 2 long screws is used to fix the raspberry pi zero from outside


Material : ABS
Color: Available in Black  and Frosted

Package includes:

1 x Raspberry Pi Zero ABS Case
R59.90  Inc VAT
Micro/Mini/Standard HDMI to VGA Adapter for RPi Zero/3/4 (HDMI VGA adapter kit)

Perfect solution for all HDMI devices that need to connect to VGA devices. This product is a portable digital-analog conversion line, defined through All  HDMI input sources. The HDMI to VGA Adapter allows for a connection to VGA monitors and projectors supporting a maximum resolution of 1920X1080

Widely used for: Computer / DVD / digital set-top box / laptop / mobile phone / digital camera / Table PC / media player / a range of HD sources such as input devices. Video signals to the TV / monitor / projector output. To solve a simple user operation of the display device connectivity solutions.


Flexible and functional
No external power supply needed, plug and play
Product resolution can be up to 720P/1080i/1080P
Input: HDMI Mini, HDMI Micro or HDMI
Output: VGA

Package  Includes:

1 x HDMI to VGA Cable (male to female LENGTH=20CM)
1 x Micro HDMI Male to HDMI Female Adapter
1 x Mini HDMI Male to HDMI Female Adapter
R144.90  Inc VAT
Raspberry Pi ZERO Mounting Plate for High Quality Camera (HQ ZERO mount plate)

Note: The Raspberry PiHigh Quality Camera and flexible tripod not included)


An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera.

Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are included in the pack.

Available for different Raspberry Pi models

It’s a lightweight and minimal way to keep your Raspberry Pi and High Quality Camera together, which saves any fuss with camera cable lengths and cases.

HATs and pHATs can still be mounted to your Raspberry Pi, meaning you can create amazing projects with screens, buttons, RTCs or any others.

Combine with our affordable flexible tripod for a great project foundation!

 Kit contents:

  • 1x Mount plate
  • 4x 6mm female-female nylon spacers
  • 8x M2.5 nylon nuts
  • 8x 5mm M2.5 nylon screws
  • 4x 10mm M2.5 nylon screws


Assembly guide available here!

R69.90  Inc VAT
ZeroDock (zerodock)

The ZeroDock is an all-in-one desktop prototyping dock for your Raspberry Pi Zero .

Little brother to ProtoDock , ZeroDock will keep your desk tidy and all of your Raspberry Pi Zero accessories in one place. No more searching for your micro-SD cards , SD adapters , HDMI adapters , USB shims , breadboards or even the Raspberry Pi Zero itself.

It’s all here, every time you’re ready to prototype a project, in one neat and tidy package.

Please note: Simple assembly required. Please see the assembly guide.

The default configuration holds a mini breadboard (included), an SD card adapter, 2x micro SD cards, 2x USB devices, a micro-USB shim and of course the Raspberry Pi Zero itself.

Users can decide to use the micro-USB shim slot to hold a micro-HDMI adapter, or you may want to hold a Portsplus or similar GPIO reference card in the SD adapter slot. You can choose to store your USB micro-SD card reader or even other larger USB devices such as the USBDoctor. Use it in whatever way works best for you.

All of the Raspberry Pi Zero ports are accessible from the ZeroDock, including the camera port and reset/composite pin header. pHATs are also not obstructed, so you’re free to prototype with your favourite add-on boards.

The case is a stylish mix of clear and black acrylic layers, black fixings and a clear breadboard, fitting in well alongside most desktop PCs/monitors.

Assembly guide available here

Kit includes:

• 4 layer laser-cut acrylic case
• Case and Raspberry Pi fixings
• Mini breadboard

Please Note - Raspberry Pi Zero & accessories not included (but the breadboard is!)

R224.90  Inc VAT
ProtoDock (protodock)

The ProtoDock is an all-in-one desktop prototyping dock for your Raspberry Pi 4, Raspberry Pi 3 or any other 40-pin Model B Raspberry Pi!

Similar to its little brother the ZeroDock, the ProtoDock keeps your desk tidy and all of your vital Raspberry Pi accessories in one place.

Please note: Simple assembly required. Please see the assembly guide

No more searching for micro-SD cards, SD adapters, USB-C adapters or USB devices. It’s all here, every time you’re ready to prototype a project, in one neat and tidy package.

Our example configuration holds your Raspberry Pi 4, a 400-point clear breadboard, 4 micro-SD cards, an SD-adapter, 4x USB devices and 2x universal slots (great for USB-C adapters or anything else you want to store).

You can of course use the storage slots for whatever you like... Customise it and use it in whatever way works best for you!

Despite sitting flush with the top glass-effect acrylic layer of the dock, all of the Raspberry Pi’s ports are accessible, including access to the micro-SD slot. HATs can also be fitted*.

The dock is made up of 4 slick, sandwiched layers of matte black and glass-effect laser-cut acrylic! A really stunning and useful home for your Raspberry Pi and projects!

Assembly guide available here

Kit includes

  • 4 layer laser-cut acrylic dock
  • 400-point clear breadboard
  • Fixings and spacers

Please Note - Raspberry Pi & accessories not included (but the breadboard is!)

*Requires removal of the lower ProtoDock Raspberry Pi mounting screws, and removal of the upper HAT spacers, if applicable.

R255.90  Inc VAT
IQaudio Codec Zero (IQaudio Codec Zero)

Codec Zero is a Raspberry Pi Zero sized board but it also includes the HAT EEPROM allowing for auto configuration of the Linux environment if needed. The Codec Zero delivers bi directional digital audio signals ( between the Raspberry Pi and onboard Dialog Semiconductor DA7212. Supporting a range of input and output devices from built in MEMS microphone, mono Electret microphone or mono speaker (1.2W 8Ω). It also has GREEN GPIO23 and RED GPIO24 LEDs, that can be used for status and a tactile button GPIO27 that can be used to start an event. The Codec Zero makes a great starting point for a walkie talkie intelligent doorbell, vintage radio hack or Smart type speaker.


P1 and P2 will support external PHONO RCA sockets if needed. P1: AUX IN, P2: AUX OUT.
Pin 1 is square:

R389.90  Inc VAT
Maker pHAT: Simplifying Raspberry Pi for Education (CT pHAT)
Check the review by MagPi (the official Magazine of Raspberry Pi) of Maker pHAT:

The Typical Problem Faced by Beginners in Learning Electronics on Raspberry Pi 

Raspberry Pi aims to bring the power of computing and digital making to the masses. It is being used by many educators, makers, and also engineers. Yet, if you are a newbie learning electronics, you might face some of these constraints:
  • Hard to get started without additional devices (monitor, keyboard, and mouse). Beginners will either need to use additional devices or follow many steps just to get started. This may confuse them. For techies that want to know why, this is because it lacks an onboard USB to UART communication for your computer to get the IP address for SSH (headless), or to kick start configuration directly.
  • Hard to get started with electronics. It doesn't come with any inputs or outputs, you will need to connect additional accessories to use it. Most beginners do not have basic knowledge of electronics. They will have a problem to understand the circuit diagram and connections needed when they first started learning. They will spend a substantial amount of time just to connect the wires and troubleshoot the connections.
  • Hard to troubleshoot the GPIO. With just the raspberry pi, beginners face a common problem when learning electronics- difficulty in troubleshooting their circuit. This is because when it doesn't work, we do not know whether the problem is due to wire connection or coding.
  • Access to GPIO is kind of difficult. There is no label on the pins, you need to search online to get the designated pin and know which pin to connect. For beginners, this definitely will make it harder for them to make the connection correctly. 
  • No easy way to properly shutdown using a switch. There is no programmable push button to enable proper shutdown through hardware. If the beginner turns off the power without properly shutting it down, the raspberry pi may not work the next time. 

Introducing Our Solution: Maker pHAT 

Maker pHAT solves all these. It is designed to:

  • Simplify to get started with Raspberry Pi without additional monitor, keyboard or mouse (Headless). Go headless with a few simple steps as it enables users to remote access Raspberry Pi through serial.
  • Simplify learning electronics. Beginners can skip the hassle of constructing the basic electronic circuit which is boring and time-consuming. Although it is equally important for them to learn about basic electronics, it can always come later after they have experienced how easy it is to create an awesome project. Start with fun and excitement. Start coding right away and see your board lights up and plays sound with the press of a button. It comes with onboard LEDs, pushbuttons, and a buzzer to easily learn how to control input and output. No messy wiring needed and no additional components needed.
  • Simplify troubleshooting and prototyping. Not only do the onboard LEDs work as outputs, but they can also act as indicators, clearly showing what's happening on that pin. When the pin is used as input, you can clearly see whether the signal is received by just looking at changes on the LEDs. The pre-soldered header pins come with nice labels. This helps the user to easily connect inputs and outputs to the right pins. This will further assist them in interfacing with sensors and actuators.
  • Simplify proper shutdown using pushbutton. You can easily follow the steps and choose one of the pushbuttons as the power button to properly shutdown the Raspberry Pi. Just press the button and it will shut down. 


Maker pHAT for Raspberry Pi

Maker pHAT is designed to be the same size as Raspberry Pi Zero board, it stacks perfectly on top of Rpi Zero with the four mounting holes aligned. (What is a HAT? Read this to know more) We do advise getting Raspberry Pi Zero WH (pre-solder header pin) for beginner because it is not an easy work to solder the 40-pin GPIO, don't forget you'll need to have the soldering tools too.

Maker pHAT is also compatible with Raspberry Pi 3B, 3B , 3A ,  and of course the latest 4B too. You just need to insert the 2x20 stacking header(included), as photo shows:

Maker pHAT is compatible with:

Maker pHAT is now Rev1.10:


  • Raspberry Pi Zero size, stack perfectly on to Pi Zero Series of SBC (Single Board Computer).
  • Compatible with standard size Raspberry Pi 3B/3B /4B1GB/4B2GB/4B4GB, medium size Raspberry Pi 3A and smaller size Raspberry Pi Zero/W/WH.
  • Standard Raspberry Pi GPIO footprint.
  • LED array for selected GPIO pins (GPIO 17, 18, 27, 22, 25, 12, 13, 19).
  • 3x onboard programmable push buttons (GPIO 21, 19 and 20, need to configure as input pull up).
  • Onboard active buzzer (GPIO 26).
  • Proper label for all GPIOs, including SPI, UART, I2C, 5V, 3.3V, and GND.
  • Utilize USB Micro-B socket for 5V input and USB to UART communication.
  • USB serial facilitated by the CH340, Rev1.10 uses FT231X as the USB to UART
  • Input voltage: USB 5V, from the computer, power bank or standard USB adapter.


Packing List:

R189.90  Inc VAT
FLIRC Raspberry Pi Zero Case (Zero Flirc Case)

The FLIRC Raspberry Pi Zero Case is finally here - overly engineered, affordable and adorable!

The FLIRC Zero shares the same genetics as the original FLIRC case with some added features. FLIRC have kept everything that makes the original case great, shrunk it down, and added some nice elements that make this mini PC for every day carry.

The familiar aluminium casing with a core heatsink and smooth top is there, offering silent, passive and efficient cooling combined with great looks.

The SD Card is enclosed inside the case so it won't slip out or get stolen. The case needs to be disassembled before the SD card can be removed. There’s even a pre-installed lanyard included in the box in case you want to take your Zero somewhere other than the home.

Two top covers are included with the FLIRC Zero – allowing you to hide away and protect your GPIO, or leave it exposed for prototyping your projects. You can even add a pHAT without worrying about your Zero’s temperature.

What's in the box

1 x FLIRC Zero Aluminum Case
1 x Thermal pad
1 x Two top covers (sealed and GPIO access)
1 x Lanyard (pre-installed, removable)


1 x The Raspberry Pi Zero’s LEDs are not visible with this case
1 x Lanyard is removable (but fiddly to get back on)
1 x Ships with a thermal pad – fit this to the case heatsink core before fitting your Raspberry Pi Zero

R329.90  Inc VAT
Industrial 6-ch Relay Module for Raspberry Pi Zero, RS485/CAN, Isolated Protection (Zero 6-ch relay industrial)

Industrial 6-ch Relay Module for Raspberry Pi Zero, RS485/CAN, Isolated Protections, Tailored For Raspberry Pi Zero Series also Suitable For Raspberry Pi Zero With Pre-Soldered Pin header.


  • RS485 half-duplex communication: using SP3485, UART control, auto RX/TX switch
  • CAN half-duplex communication: using MCP2515 SN65HVD230 solution, SPI control
  • Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
  • Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
  • Onboard resettable fuses and protection diodes, ensuring current/voltage stable output, preventing over current/voltage, better shock-resistance performance
  • High quality relay, contact rating: ≤10A 250V AC or ≤10A 30V DC
  • ABS protection enclosure with rail-mount support, easy to install, safe to use
  • Comes with development resources and manual (wiringPi and python examples)


OPERATING VOLTAGE7V~36V (industrial input voltage compatible)RELAY CHANNEL6 ch

What's in the box ?

1 x ABS protection enclosure (top and bottom)
1 x RPi Zero Relay
1 x Screwdriver
1 x 12V 1A power adapter
1 x Screws pack

Resources :

WIKI: RPi_Zero_Relay

R769.90  Inc VAT
PoE Ethernet / USB HUB BOX for Raspberry Pi Zero Series(Zero not included), 3x USB 2.0, 802.3af-Compliant (WS zero POE hub case kit)

PoE Ethernet / USB HUB BOX for Zero. Dull polish surface, well designed, nice & dust-proof. PoE 802.3af-compliant Ethernet Port | 3x USB 2.0 Ports.

Features at a glance

The PoE-ETH-USB-HUB-BOX is a HUB kit with PoE/ETH/USB HUB HAT inside. It is tailored for Raspberry Pi Zero series, small in size, each cut-out of the case is exactly aligned with the connector. The case adopts classic Raspberry Pi red/white color combination, with quality dull polish surface, effectively keeping the Zero away from dust. By using this small HUB BOX and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi Zero in only one Ethernet cable, along with 3x extended USB ports.

  •     Designed for Raspberry Pi Zero, compatible with Zero series boards
  •     Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port
  •     PoE (Power over Ethernet) feature, 802.3af-compliant
  •     Fully isolated SMPS (Switch Mode Power Supply)
  •     3x extended USB ports, compatible with USB 2.0 / 1.1
  •     Angle rounded design, smooth hand feeling, "simple snap" case lid
  •     Quality ABS material, dull polish surface, anti-fingerprint
  •     Comes with two different lids, changing as you like


PoE power input:     37V ~ 57V DC in
Power output:     5V 2.5A DC out
Network standard:     IEEE 802.3af-compliant PoE
Dimensions:     72.80 × 37.50 × 45.80 mm

Compatible with Raspberry Pi Zero series

specialized pogo pin connection, dedicated cut-outs for Zero series, plug-and-play 

3x extended USB 2.0 ports

USB1 ~ USB3, compatible with USB 2.0 / 1.1

Extended Ethernet port

USB to Ethernet conversion by the RTL8152B chip, 10M / 100M auto-negotiation

Two different lids, change as you like

"simple snap" design, easy to change, allows attaching other Zero HATs

Application example

Outline dimensions


R539.90  Inc VAT
Unicorn pHAT (Unicorn pHAT)

What's going to protect your beloved Raspberry Pi from an onslaught of rainbow-coloured fusion? That's right, it's Unicorn pHAT.

Sporting a matrix of 32 (8 x 4) RGB LEDs and powered directly from the Pi, this is the most compact pocket aurora available.

Unicorn pHAT provides a wash of controllable colour that is ideal for mood-lighting, pixel art, persistence of vision effects, status indications, or just blasting colour into your surroundings.


  • 32 RGB LEDs (SK6218 - 3.5mm x 3.5mm)
  • LED data driven via DMA over PWM
  • Unicorn pHAT pinout
  • Compatible with Raspberry Pi 3, 2, B , A , Zero, and Zero W
  • Python library
  • Female header requires soldering


Unicorn pHAT uses the same Python library as Unicorn HAT, so it's super-easy to use, should automatically detect that you're using the pHAT and includes some examples written specially for Unicorn pHAT.


  • Warning: SK6218 LEDs are bright enough to cause eye pain, do not look at them directly when brightly lit. We recommend using Unicorn pHAT at lower brightness levels.
  • Photo-sensitivity warning: flashing, strobing, and patterns of lights may cause epileptic seizures. Always take care and immediately stop using if you feel unwell (dizziness, nausea, affected vision, eye twitching, disorientation).
  • Power: Unicorn pHAT works best with a >2A microUSB power supply for your Pi. We recommend the official Raspberry Pi power supply.
  • Compatibility (audio): as Unicorn pHAT uses PWM and GPIO18, it will interfere with analogue audio playback (random colour patterns and flickering). HDMI should work just fine! :D
Tutorials & Projects
R229.90  Inc VAT
Pro Mini Camera Mount for Raspberry Pi Zero (pro mini cam mount zero)

Raspberry Pi, Camera, cables and tripod not included!

We designed this mount to create an affordable, tripod-compatible solution to help you monitor "things" with your Pi Zero and Official Raspberry Pi Camera Module - great for keeping an eye on 3D prints, monitoring rooms, access points, timelapsing plants and more!

You don't need to mount it on a tripod as it will happily sit on a desk or shelf, but it has a 1/4" hole ready in case you do (you'll need a nut as this isn't threaded).

There are some great ready-to-go software/OS options out there for these kinds of projects, such as OctoPrint for 3D printers and MotionEyeOS for turning your Pi and camera module into an IP camera. Both of these options allow viewing on your smartphone too!

The mount comes as a kit which requires some simple assembly.

Other Parts Required

This listing is for the mount only which includes the laser-cut Perspex parts and fixings. You will also need:

Optional Parts

Fancy mounting this on a tripod? You'll need the following parts:

What's in the box:

2 Perspex layers and a bag of fixings

R89.90  Inc VAT
Pibow Zero 2 W (Pibow zero 2 W)

Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue!

Note: this case is for the Raspberry Pi Zero 2 W only. This case is not compatible with the Pi Zero or the original Pi Zero W. Does not include a Raspberry Pi Zero 2 W!

We've got a tutorial showing you how to build your Pibow here.


  • Compatible with Raspberry Pi Zero 2 W
  • Super-slimline profile
  • Fully HAT/pHAT compatible
  • Protects your beloved Pi Zero 2 W!
  • Clear top leaves Raspberry Pi Zero 2 W visible
  • GPIO cut-out
  • Leaves ports and GPIO accessible (encloses micro SD)
  • Slot for camera cable to slip between layers
  • Made from lightweight high-quality cast acrylic
  • Great for hacking and tinkering!
  • Made in Sheffield, UK

Crafted out of four unique layers including a transparent top and base that leave your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Zero 2 W while leaving the primary ports and GPIO accessible.

This case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly!

What's in the box?

1 x Pibow case for Zero 2 W

Protect your Pi Zero 2 W in style with the Pibow Zero 2 W case, in calming violet waters - ocean blue, purple, and deep blue!
R109.90  Inc VAT
Dedicated Aluminum Heatsink for Raspberry Pi Zero Series, Zero / Zero 2 W (dedicated heatsink for zero )

Aluminum Heatsink For Zero Series
Dedicated Aluminum Heatsink, Corrosion / Oxidation Resisting, Better Heat Dissipation

Tailored For Raspberry Pi Zero Series
Matching With The Zero On Size And Mounting Holes, Fast Heat Dissipation

Used With Zero Boards

for reference only, Zero is NOT included.

Outline Dimensions

* measured manually, for reference only.

How To Install

Assembly on Raspberry Pi Zero 2 W

Assembly on Raspberry Pi Zero


Weight: 0.028 kg

What's in the box?

  1. Zero-HEATSINK x1
  2. Thermal tapes 3PCS x1
  3. Mini cross wrench sleeve x1
  4. Screwdriver x1
  5. Screws pack x1
1  2  3  4  5 
R56.90  Inc VAT
Raspberry Pi Zero/2 W Heatsink Enclosure (pi 0/2 W heatsink enclosure)
Note: The Raspberry Pi board is NOT INCLUDED. Please get them separately.


Say hello to yet another passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded solid aluminum cores and a thermal pad located on top of the processor.

With incredible silent passive cooling performance, no fan noise, full port access, WiFi window, striking heatsink-like design, and full aluminum construction for the top cover, it is a perfect enclosure to keep your Pi Zero cool and running smoothly even while running on full load! :)

Ports Configuration:

Raspberry Pi Zero W/2W Heatsink Enclosure for Straight Headers


Use high-quality materials to provide the best protection for your Raspberry Pi.
The aluminum alloy shell is sturdy and durable, and the heat conduction is fast.
The upper cover of the casing is designed with thermally conductive columns to achieve overall heat dissipation through the thermally conductive adhesive and chip bonding.
Small size and beautiful appearance.
The bottom of the shell is made of acrylic material, smooth and beautiful.
Does not affect WiFi and Bluetooth-compatible signals.
Note: If you do not want to use the GPIO function, it is recommended to choose the enclosure for right-angle headers.



Compatible with Raspberry Pi Zero W and Raspberry Pi Zero 2W
Dimension: 65mm x 13mm x 30mm

Packing List:

1 x RPi Zero Heatsink Enclosure
1 x Thermal paste
1 x Straight headers
4 x Screws

R156.90  Inc VAT
Per Page      21 - 40 of 53