Special Offers

If you done using a breadboard for Pico and are ready to take your prototype to solder, you will love this board.

It can be tricky to work out which pin is which when using a Raspberry Pi Pico
with prototyping board. The MonkMakes Pico Proto PCB solves this problem by
labeling the Pico pins on the PCB.



The MonkMakes Pico Proto PCB makes it easy to make soldered prototypes using the Raspberry Pi Pico. You can solder the Pico to the prototyping board using the castelations around the edge of the board, or using header pins, or even solder header sockets onto the Pico Proto PCB so that you can easily swap out the Pico.

Specifications

The layout of the Pico Proto PCB is modelled on a 400-point breadboard, and after the Pico is soldered to the PCB, there are 10 more rows, that can be used for through hole components


WARNING: Low voltage, low current usage only. Maximum 50V at 3A.

• Modeling Technology: FDM（Fused Deposition Modeling）
• Printing Size: 235x235x250mm
• File Formats: STL/OBJ/AMF
• Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D
• Print Speed: 80-100mm/s
• Resume Print Function: Yes
• Supported Materials: PLA/TPU/PETG/ABS/WOOD
• File Transfer: USD/SD card
• CR-6 SE FDM 3D Printer Hardware
• Machine Weight: 9.5KG
• Motherboard: Silent motherboard
• Nominal Voltage: 100v-240v AC 50/60HZ
• Nominal Power: 350W
• Output Voltage: DC24V
• Operation: 4.3in color touch screen
• Filament Sensor: Photoelectric sensor
• Machine Size: 442x462x540mm
• Z-axis: Dual Z-axis
• Languages: Chinese/English
• Leveling-free: Yes
• CR-6 SE FDM 3D Printer Extruder Hardware
• Layer Thickness: 0.1-0.4mm
• XY Position Precision: 0.01mm
• Print Resolution: ±0.1mm
• Nozzle Temperature: ≤260℃
• Nozzle Diameter: 0.4mm (more options supported)
• Hotbed Temperature: ≤110℃

• Product page
• Updates page

Features

• Compatible with both micro:bit V1.X and V2.
• The building:bit kit is designed based on BBC micro:bit, equipped with Super:bit professional expansion board.
  • The most popular microcontrollers for children are suitable for STEAM education.
  • Super:bit expansion board specially designed for micro:bit can perfectly integrate with building blocks, build any shape, and drive building block servo, motor, RGB lights and other devices.
• 16 kinds of building block models full-color printing project instruction manual
  • The building block parts of this kit are dominated by blue and white, the whole is full of science and technology, which can be assembled into N models.
  • The manual includes assembly steps of 16 kinds of models and basic instruction content for programming.
• MakeCode programming Python programming, suitable for users of different ages.
  • MakeCode programming: It can effectively reduce the learning threshold and improve children's interest in learning by dragging and splicing colorful building blocks
  • Python programming: A string of character commands control the building blocks, writing a wonderful chapter belonging to the Makers and building block enthusiasts.
• Support App/game handle remote control
  • When using different equipment to interact with the building blocks, the user can experience the fun brought by technology.
• Compatible with Lego building block, various gameplays
  • 16 kinds of models with up to 80 gameplays, such as spider walking, helicopter propeller rotation, car wriggling, cannonball shooting, etc.
  • Users can also expand through more Lego bricks and build more interesting shapes.
• Programming language: MakeCode graphical programming / Python programming

Specifications

• Remote control method: APP/micro:bit gamepad
• Main material: ABS
• Package Weight: about 1400g
• Packing box size: 288 * 213 * 68mm
• Battery type: Rechargeable lithium battery
• Lifetime: 120 minutes
• Battery energy: 3.7V / 1200mAh
• Working temperature: 4 ~ 40 ℃
• Onboard function: RGB lights, buzzer, etc.
• Number of building blocks: 358 high-precision building blocks
• Motor / Servo: 2 motors, 1 servo

Resources

• Yahboom Building:bit superkit tutorial
• Superbit hardware interface manual, pdf file
• APP(Android) download
• Bluetooth communication protocol, pdf file
• Assembly Instructions, zipped file, extract to get jpeg files
• Makecode offline software

• Minimalist industrial
• Completely enclosed chamber
• Filament breakage sensor
• Large-size color touch screen
• Internal LED light

• Molding technology: FDM
• Number of nozzle:1
• Print size: 200x200x200mm
• Machine dimension: 411x435x503mm
• Package dimension: 533x499x605mm
• Hotbed temperature: ≤100°C
• Nozzle temperature: ≤260°C
• Layer thickness: 0.1-0.4mm
• Supported filament: PLA/ABS
• Printing precision: ±0.1mm
• Power supply: Input 115-235V  Output 24V
• Diameter of nozzle: 0.4mm

•     Set up Raspberry Pi for retro gaming
•     Emulate classic computers and consoles
•     Learn to program retro-style games
•     Build a portable console, arcade cabinet, and pinball machine
•     And much, much more!

Discover the true potential of Raspberry Pi with the new, official Handbook 2023. With over 200 pages of amazing projects, fun tutorials, practical guides, and clear reviews, it has everything you need to master Raspberry Pi!

Inside The Official Raspberry Pi Handbook 2023

• QuickStart guide to setting up your Raspberry Pi computer
• Make stuff with Raspberry Pi Pico W
• Incredible projects built by the global Raspberry Pi community
• Find the right kit and products for your dream builds
• Get creating with our comprehensive tutorials and guides
• Over 200 pages of essential advice!

What's in the box?

1 x RPi 2023 Handbook

AlphaBot is a robotic development platform compatible with Raspberry Pi and Arduino. It consists of the AlphaBot mainboard, the mobile chassis, and everything required to get it moving.

Just connecting a controller board, Raspberry Pi or Arduino, and combined with our open source example code, now it's all ready to start your robotic exploration: line tracking, obstacle avoidance, video monitoring, WiFi/Bluetooth/ZigBee/Infrared remote control, etc.

• Raspberry Pi/Arduino interfaces, works with either one separately, or both
• Arduino extend header, supports Arduino shields
• Modular design, plug-and-play modules like line tracking, obstacle avoidance, speed measuring, etc. eliminating the trouble of connecting mess wires.
• LM298P motor driver with diode protection circuit, more safety
• LM2596 voltage regular, provides stable 5V power to the Raspberry Pi/Arduino
• TLC1543 AD acquisition chip, allows the Pi to use analog sensors

1. Raspberry Pi interface: for connecting Raspberry Pi
2. Arduino interface: for connecting Arduino
3. Motor interface
4. Ultrasonic module interface
5. Servo module interface
6. Obstacle avoidance module interface
7. Speed measuring interface
8. Battery holder: supports 18650 batteries
9. Reserved power input (not soldered): for connecting other external power supply
10. Arduino expansion header: for connecting Arduino shields
11. UART interface: for connecting Bluetooth module, to control the robot remotely via Bluetooth
12. SPI interface: for connecting NRF24L01 wireless module
13. Line tracking module interface
14. TLC1543: 10-bit AD acquisition chip, allows the Pi to use analog sensors
15. LM298P: dual H bridge motor driver chip, up to 2A current
16. Anti-reverse diode
17. Power switch
18. LM2596: 5V regulator
19. Power indicator
20. UART switch: turn on to enable serial communication between Raspberry Pi and Arduino
21. IR receiver: control the robot remotely via infrared
22. Raspberry Pi/Arduino selection: select the Raspberry Pi or Arduino to control the robot peripherals

1. AlphaBot mainboard x1
2. Tracker Sensor x1
3. Photo Interrupter Sensor x2
4. Infrared Proximity Sensor x2
5. Motor with gearbox 2PCS x1
6. AlphaBot wheel 2PCS x1
7. AlphaBot acrylic chassis x1
8. Motor mounting plate 4PCS x1
9. omni-direction wheel x1
10. 20-slots encoder disk 2PCS x1
11. IR remote controller x1
12. XH2.54 4cm 4Pin 2PCS x1
13. XH2.54 4cm 3Pin 2PCS x1
14. XH2.54 4cm 7Pin x1
15. AlphaBot screws x1

Resources

Wiki : www.waveshare.com/wiki/AlphaBot

Description

This lovely little lens set is the best way to easily expand the field of view of your Raspberry Pi camera! 

This lens kit means that you can use your camera module in many exciting ways:

• 1x Wide-angle lens: Ideal for capturing those landscape shots/night sky time-lapses
• 1x Macro lens: Beautiful close-up images of anything from insects to circuit boards
• 1x Fish-eye lens: Security systems and crazy 180° FOV shots

Perfect for taking shots from anywhere from your desk to the edge of space this lens comes with a back splint which means you can also use it with other camera devices such as your mobile phone.

Each lens screws into the clip which fits perfectly onto your camera module.

Features

• Compatible with the known universe *
• High-class glass lens, high clarity.
• No vignetting or dark circle.
• Lens covers to protect the camera lenses
• Material: ABS & aluminum alloy
• Compatible with most of the official Raspberry Pi Camera Modules

What's in the box?

1 x camera clip
3 x screw on lenses

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Supports both traditional CAN2.0 and CAN FD protocols
• Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
• Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
• Onboard lightningproof, ESD protection, short circuit protection, more safe communication
• Onboard voltage translator, select 3.3V/5V operating voltage by jumper
• Onboard 120Ω terminal resistor, configured by jumper
• Comes with development resources and manual (examples for Raspberry Pi/Arduino)

• CAN CONTROLLER: MCP2518FD
• CAN TRANSCEIVER: MCP2562FD
• CONTROL BUS: SPI
• POWER SUPPLY: External power supply terminal OR Raspberry Pi
• SCREW TERMINALINPUT VOLTAGE: DC 8~26V
• OPERATING VOLTAGE: 5V
• LOGIC LEVEL: 3.3V/5V
• DIMENSIONS: 65.0 × 56.5mm
  
  

• 6x 10/100/1000 Mbps Ethernet ports
• 2x Uplink ports
• 4x PoE ports
• IEEE 802.3af/at Power Over Ethernet (PoE) enables installation in hard to reach locations
• 60 W total power budget
• Up to 30 W power output per PoE port

Acrylonitrile butadiene styrene, ABS.

A common plastic that’s found all around us, with the most well-known use being Lego bricks. Its properties, such as high strength and good temperature resistance, make it a good choice for many applications

Print temp :230 - 260 degrees 

Heated Bed :- 90 - 100 degrees 

Speed range : 30 - 60mm/s optimal

Printability : Moderate

Net Weight: 1kg

What's in the box ?

1 x SA Filament ABS Blue (1.75mm)

Acrylonitrile butadiene styrene, ABS.

A common plastic that’s found all around us, with the most well-known use being Lego bricks. Its properties, such as high strength and good temperature resistance, make it a good choice for many applications

Print temp :230 - 260 degrees 

Heated Bed :- 90 - 100 degrees 

Speed range : 30 - 60mm/s optimal

Printability : Moderate

Net Weight: 1kg

What's in the box ?

1 x SA Filament ABS Pink (1.75mm)

Acrylonitrile butadiene styrene, ABS.

A common plastic that’s found all around us, with the most well-known use being Lego bricks. Its properties, such as high strength and good temperature resistance, make it a good choice for many applications

Print temp :230 - 260 degrees 

Heated Bed :- 90 - 100 degrees 

Speed range : 30 - 60mm/s optimal

Printability : Moderate

Net Weight: 1kg

What's in the box ?

1 x SA Filament ABS Brown (1.75mm)

PETG is short for polyethylene terephthalate glycol-modified

PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe.

Print temp : 235 – 255°C 
Heated Bed : 65 – 85°C​
​Fan speed / Cooling: 0 - 50%
Speed range : 30 - 60mm/s optimal
Printability : Moderate
Net Weight: 1kg

What's in the box ?

1 x SA Filament  PETG Yellow (1.75mm)

100% cotton Unisex T-shirt from the Cytron for every maker that loves making stuff. Simple yet comfortable!

Comes in black color with the slogan of TRUST ME I'M A MAKER

There are several sizes of this T-shirt to accommodate everyone :) Please choose the preferred size next to the main photo. It is Unisex T-shirt so it is suitable for both male and female maker :)

• XS (Extra Small) Size
• S (Small) Size
• L (Large) Size
• M (Medium) Size
• XL (Extra Large) Size
• XXL (Double Extra Large) Size
• XXXL (Triple Extra Large) Size

Features:

• Coming from makers to makers :)
• 100% cotton, super comfortable
• The black color with:
  • Front: Slogan: TRUST ME I'M A MAKER
  • Back: Cytron Logo
• Available Sizes:
  • Extra Small (XS):
    • 36" or 91.44cm for the Chest (Chest = 2 x L)
    • 25" or 63.5cm for Height
  • Small (S):
    • 38" or 96.52cm for the Chest (Chest = 2 x L)
    • 26" or 66.04cm for Height
  • Medium (M):
    • 40" or 101.6cm for the Chest (Chest = 2 x L)
    • 27" or 68.58cm for Height
  • Large (L):
    • 42" or 106.68cm for the Chest (Chest = 2 x L)
    • 28" or 71.12cm for Height
  • Extra Large (XL):
    • 44" or 111.76cm for the Chest (Chest = 2 x L)
    • 29" or 73.66cm for Height
  • Double Extra Large (XXL):
    • 46" or 116.84 cm for the Chest (Chest = 2 x L)
    • 30" or 76.2 cm for Height
  • Triple Extra Large (XXXL):
    • 48" or 121.92 cm for the Chest (Chest = 2 x L)
    • 31" or 78.74 cm for Height

What's in the box?

A meteorologically minded Raspberry Pi HAT designed to make hooking up weather sensors a breeze (or a squall, or a gale).

Weather HAT is a tidy all-in-one solution for hooking up climate and environmental sensors to a Raspberry Pi. It has a bright 1.54" LCD screen and four buttons for inputs. The onboard sensors can measure temperature, humidity, pressure and light. The sturdy RJ11 connectors (remember those?) will let you easily attach wind and rain sensors. It will work with any Raspberry Pi with a 40 pin header (that's most of them except the really old ones).

You could install it outside in a suitable weatherproof enclosure (like a waterproof junction box or even a Tupperware container) and connect to it wirelessly - logging the data locally or piping it into Weather Underground, a MQTT broker or a cloud service like Adafruit IO. Alternatively, you could house your weather Pi inside and run wires to your weather sensors outside - making use of the nice screen to display readouts.

Please note: the wind and rain sensors are sold separately.

Features

• 1.54" IPS LCD screen (240 x 240)
• Four user-controllable switches
• BME280 temperature, pressure, humidity sensor (datasheet)
• LTR-559 light and proximity sensor (datasheet)
• Nuvoton MS51 microcontroller with inbuilt 12-bit ADC (datasheet)
• RJ11 connectors for connecting wind and rain sensors (sold separately)
• HAT-format board
• Fully-assembled
• Compatible with all 40-pin header Raspberry Pi models
• Python library
• Schematic

Raspberry Pi and accessories are sold separately

Software

We've put together a Python library to give you easy access to all Weather HAT's functions, together with straightforward examples to help you learn how to read the sensors and use all the individual parts. There's also a weather station example that shows you how it's possible to combine all the functions into an application.

Our Getting Started tutorial contains a thorough walkthrough of Weather HAT's functionality plus beginner friendly instructions for installing the Python library and running the examples.

Notes

• Want to add on more I2C sensors? No problem, there's an solderless I2C header located on the back of the HAT that you can poke jumper / DuPont wires in to.
• If you'd like to hook up more analog sensors (3.3v max) we've broken out some extra ADC channels on the front of the board, as well as a convenient 3v3 power and ground.
• We've found two standoffs at the GPIO edge to be sufficient to keep this HAT firmly in place, but if you're attaching it to a full-size Pi and want to add standoffs at every corner you can pick up some more.
• Dimensions: 65 x 56.5 x 19 mm (L x W x H, including header and connectors)

This project kit comes with the new Maker Soil Moisture Sensor.

A capacitive moisture sensor which measures the soil moisture level by changing the probe capacitance and does not erode the sensor probe easily.

The Lesson Guide is written in simple language and comes with a step-by-step guide to make an auto plant watering system.

Click here to download PDF English Version

Lesson 1 : Hello!

• Introduction to micro:bit and MakeCode.

Lesson 2 : What’s the Soil Moisture Level?

• Display soil moisture level through micro:bit by using Maker Soil Moisture Sensor.

Lesson 3 : Dry? Moist? Or Wet?

• Monitor the soil moisture level and differentiate it between dry, moist and wet.

Lesson 4 : Water the Plant

• Turn on the water pump to water the plant when the soil is dry.

Lesson 5 : Servo Motor, Direct the Pipe!

• Control the direction of the water pipe by using a servo motor to water the plant thoroughly.

Additional Activities: Visualize Soil Moisture Level, Music On

• Plot a bar graph to show the soil moisture level and make the auto plant watering system to play melodies and sound notifications.

This SD card to SD card extension cable is perfect for protecting your SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access.

SD to SD Extension Cable Features:

• SD Card Male to SD Card Female
• Flex Cable ~ 45cm
• Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
• Supports SD/SDHC/SDXC Cards

Ultra Thin, Tower-style, Speed-Adjustable Fan



for reference only, Raspberry Pi4 is NOT included.