Raspberry Pi Power

RPi Power
Sort By:  
Raspberry Pi4 Official USB-C 15.3W power supply Black 5.1V 3A (Pi4 3A power black)

Description:

You will find a South African plug adapter here

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/black-usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: 5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

What's in the box:

1 x USB-C 15.3W power supply

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Raspberry Pi4 Official USB-C 15.3W power supply White 5.1V 3A (Pi4 3A power white)

Description:

You will find a South African plug adapter here

The official Raspberry Pi USB-C power supply is designed to power the latest Raspberry Pi 4 Model B computers, which were released in June 2019.
Featuring a captive USB-C cable, the power supply is available in four different models to suit different international power sockets, and in two colours, white and black.

If you need to use the power supply for an earlier model RPi or the zero you'll need a type C to micro B adapter than you will find at https://www.pishop.co.za/store/rpi-power/usb-type-c-female-to-micro-usb-male-adapter

Specifications

Output
  • Output voltage: 5.1V DC
  • Minimum load current: 0A
  • Nominal load current: 3.0A
  • Maximum power: 15.3W
  • Load regulation: ±5%
  • Line regulation: ±2%
  • Ripple & noise: 120mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection, Overcurrent protection, Over temperature protection
  • Efficiency: 81% minimum (output current from 100%,75%, 50%, 25%)72% minimum at 10% load
  • Output cable: 1.5m 18AWG
  • Output connector: USB Type-C


Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 0.5A maximum
  • Power consumption (no load): 0.075W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow
Case material
UL94V-1

AC pin material
Brass (NI plated)

What's in the box:

1 x USB-C 15.3W power supply

WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.
R169.90  Inc VAT
Raspberry Pi Power over Ethernet Plus (POE ) HAT (RPi POE HAT)
Description:

The Raspberry Pi PoE HAT is an add-on board for Raspberry Pi computers with PoE pins, including Raspberry Pi 3B and Raspberry Pi 4. It is used to power Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network. The HAT also includes a fan that will cool the Raspberry Pi processor.

Specifications:

Standard: IEEE 802.3at-2003 PoE
Input voltage: 37–57 V DC, Class 4 device
Output power: 5 V DC/4 A
Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling

Features:
  • Fully isolated switched-mode power supply
  • Fan control

Operating temperature: 0 °C to 50 °C
Production lifetime: The Raspberry Pi PoE HAT will remain in production until at least January 2027
Compliance: For a full list of local and regional product approvals, please visit www.raspberrypi.org/compliance

Physical specifications


What's in the box?:

1 x Power over Ethernet Plus (POE ) HAT

WARNINGS

• This product shall only be connected to a Raspberry Pi via the four PoE pins.
• Any external power-sourcing equipment/power injector used to enable an Ethernet network shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a well ventilated environment, and if used inside a case, the case should not be covered.
• The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of
use and be marked accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice when used in conjunction with Raspberry Pi computers.
• Where peripherals are connected that do not include the cable or connector, the cable or connector must offer adequate insulation and operation in order that the relevant performance and safety requirements are met.


SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source. Raspberry Pi computers and the Raspberry Pi PoE HAT are designed for reliable operation at normal ambient room temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board
and connectors.
• Avoid handling the printed circuit board whilst it is powered, and handle it only by the edges to minimise the risk of electrostatic discharge damage.
R409.90  Inc VAT
Raspberry Pi Official Pi3/ZERO/Pico Micro USB Power Supply 5.1V 2.5A square white (Pi3 Power 2.5A square White)

Description:

You will find a South African plug adapter here

This PSU supports up to 2.5A of current, so it won't let you down when powering hungry devices through your Raspberry Pi 3 Model B, Zero and Pico

Specifications:

Output

- Output voltage: 5.1V DC
- Minimum load current: 0.0A
- Nominal load current: 2.5A
- Maximum power: 12.5W
- Load regulation: ±5%
- Line regulation: ±2%
- Ripple & noise: 120mVp-p
- Rise time: 100ms maximum to regulation limits for DC outputs
- Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
- Protection: Short circuit protection

Overcurrent protection
- Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
- Output cable: 1.5m 18AWG
- Output connector: mirco USB

Input
- Voltage range: 100–240Vac (rated) 96–264Vac (operating)
- Frequency: 50/60Hz ±3Hz
- Current: 0.5A maximum
- Power consumption (no load): 0.075W maximum
- Inrush current: No damage shall occur and the input fuse shall not blow

What's in the box?

1 x Official Power Supply


WARNINGS
• This product should be operated in a well-ventilated environment.
• The connection of incompatible devices to this power supply may affect compliance, result in damage to the unit and invalidate the warranty.

SAFETY INSTRUCTIONS
To avoid malfunction or damage to this product please observe the following:
• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; this is designed for reliable operation at normal ambient room temperatures.
• Do not attempt to open or remove the power supply case.


R159.90  Inc VAT
Raspberry Pi 48W (8V DC, 6A) power supply for Build HAT (RPi build power supply 8V)
Description:

Official 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT. Shipped with easily interchangeable heads for the UK, US, EU and Australia you can now use your Pi in all four corners of the world! 

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® Technic™ motors, as well as your Raspberry Pi computer.
Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Specifications:

Output
  • Output voltage: +8.0V DC
  • Minimum load current: 0.01A
  • Nominal load current: 6.0A
  • Maximum power: 48.0W
  • Load regulation: ±5%
  • Line regulation: ±5%
  • Ripple & noise: 200mVp-p
  • Rise time: 100ms maximum to regulation limits for DC outputs
  • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
  • Protection: Short circuit protection
  • Overcurrent protection
  • Overvoltage protection
  • Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
  • Output cable: 1.5m 16AWG
  • Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive

Input
  • Voltage range: 100-240Vac (rated)
  • 96-264Vac (operating)
  • Frequency: 50/60Hz ±3Hz
  • Current: 1.2A maximum
  • Power consumption (no load): 0.1W maximum
  • Inrush current: No damage shall occur and the input fuse shall not blow

What's in the box?

1 x Official 48W power supply for Build HAT
R269.90  Inc VAT
Hobbywing 5V 3A UBEC Step-Down Converter (Hobbywing power converter)

UBEC's (Universal Battery Eliminator Circuit's) are simply DC to DC step down voltage regulators! This UBEC is perfect for the Raspberry Pi, as it's able to take high voltages (5.5V up to 26V), and outputs a consistent safe voltage of 5V at up to 3A nominal or 5A max! The Hobbywing 5V 3A UBEC is a switch-mode type, which results in it being much more efficient than linear type UBEC's (so your batteries will last longer!)

UBEC's are perfect for applications where you plan to use the Raspberry Pi in a circuit with high voltages such as robots where you'll be driving motors!

Due to the voltage drop caused by the Raspberry Pi, it is recommended to input a minimum of 6.5V to receive a stable 5V output. Anything lower than 6.5V will result in a low voltage warning on the Pi.

Please Note. The Hobbywing UBEC can be set to output either 5V or 6V using an onboard jumper select! Please DOUBLE CHECK your output voltage is correct before connecting your microcontroller or circuit! 

Features

  • Designed with an advanced switch mode DC-DC regulator IC.
  • Battery polarity reversal protection.
  • A metal shield covers almost all the electronic components, and a specially made filter is attached to the output wires to significantly reduce the electromagnetic interference.
  • The working status is shown by an indicator (LED), which lights when the output is in normal range.
  • Output Voltage: [email protected] or [email protected] (Changeable with an output-voltage select jumper)
  • Continuous output current: 3 Amps
  • Maximum output current: 5 Amps
  • Input: 5.5V - 26V (2 - 6 cells lithium battery pack or 5 - 18 cells NiMH /NiCd battery)
  • Size: 43mm*17mm*7mm (L*W*H)
  • Weight: 11g

Check out our tutorial here: https://www.modmypi.com/blog/using-a-ubec-with-a-raspberry-pi

UBEC's (Universal Battery Eliminator Circuit's) are simply DC to DC step down voltage regulators! This UBEC is perfect for the Raspberry Pi, as it's able to take high voltages (5.5V up to 26V), and outputs a consistent safe voltage of 5V at up to 3A nominal or 5A max!
R89.90  Inc VAT
White USB Type C Female To Micro USB Male Adapter (White type C to micro B adapter)
Description:
This adapter is ideal to convert the 3A type C official power supply to micro B for the Raspberry Pi models Zero, 2 and 3.

Specifications:
Material: Plastic and Metal
Color: Available in Black and White
Length: 2.3cm
Connector A: Micro USB Male
Connector B: Type C Female

Package includes:
1 X White Type C Female To Micro USB Male Adapter
R14.90  Inc VAT
Black USB Type C Female To Micro USB Male Adapter (Black type C to micro B adapter)
Description:

This adapter is ideal to convert the 3A type C official power supply to micro B for the Raspberry Pi models Zero, 2 and 3.

Specifications:

Material: Plastic and Metal
Color: Available in Black and White
Length: 2.3cm
Connector A: Micro USB Male
Connector B: Type C Female

Package includes:

1 X Black Type C Female To Micro USB Male Adapter
R19.90  Inc VAT
Power over Ethernet HAT (B) for Raspberry Pi 3B /4B and 802.3af PoE network (WS POE hat)
POE HAT for Raspberry Pi

Power Over Ethernet HAT for Raspberry Pi 3B /4B, 802.3af-compliant
(any backward-compatible future versions will be supported as well)

OLED for real-time monitoring temperature, IP, and fan status



The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory for the Raspberry Pi 3B /4B. By using this small HAT and some proper 802.3af-compliant power sourcing equipment, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.


Features at a glance

 Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B /4B
 PoE (Power Over Ethernet) capability,802.3af-compliant
 Fully isolated switched-mode power supply (SMPS)
 0.91" OLED, for monitoring processor temperature, IP address, and fan status in real-time
 Onboard cooling fan, allows auto running on powerup OR programmable control, configured by switch
 Integrates PCF8574 IO expander for I2C bus, providing pin P0 for directly fan control, and more spare IO pins

Specifications

PoE power input:     37V ~ 57V DC in     
OLED size:     0.91"
PoE power output:     5V 2.5A DC out     
OLED pixels:     128×32
Network standard:     802.3af PoE     
OLED driver:     SSD1306
Dimensions:     56.5 × 65mm     
OLED display colour:     white

For use with Raspberry Pi 3B /4B



Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs

Power Over Ethernet

providing both network connection and power supply for your Raspberry Pi in one cable





0.91" OLED display

128 × 32 pixels, I2C-bus controlled
monitoring processor temperature, IP address, fan status in real-time



Cooling fan

allows auto running on powerup OR programmable control, configured by switch
automatically turn on/off depending on the Raspberry Pi processor temperature



Onboard PCF8574 chip

PCF8574 IO expander for I2C bus, providing 8 IO pins, of which P0 for fan control
and extra spare pins on solder pads (P1-P7, INT)



Pinout definition



Outline dimensions


Resources & Services

 WIKI: www.waveshare.com/wiki/PoE_HAT_(B)

R359.90  Inc VAT
Bakeey 10Amp 10 Ports USB Charger Smart Desktop Quick Charging USB Charger White (10 port usb power supply)
Description:

Charge up to 10 USB devices simultaneously from one wall outlet. Simply connect any USB mobile device, such as an iPad, iPhone, Tablet PC, Smartphone etc. and quickly charge all your devices from one place.The USB Charger is durable and lightweight and works great at home or at the office. This is a must-have travel companion to charge all your power-hungry devices.

Specifications:

Brand: Bakeey
Model: XBX-09L
USB Port: 10 USB
Plug: EU
Product Weight: 170g
Dimensions: 112mm x 68mm x 26mm
Colour: White

Technical Parameters:

Total Power: 50W
Output: 5V 10A(in total shared between ports)

Package  Includes:

1 x 10 USB Ports Charger
R624.90  Inc VAT
Uninterruptible Power Supply UPS HAT (B) for Raspberry Pi, 5V Output, up to 5A Current, Pogo Pins Connector (WS UPS for Pi )
Description:

  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B / 4B, etc.
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards
  • Batteries warning indicators, easy to check if the battery is connected correctly
  • Comes with development resources and manual


Specifications:

OUTPUT VOLTAGE5VCHARGER8.4V 2A
CONTROL BUSI2CDIMENSIONS56 × 85mm
BATTERY SUPPORT2x 18650 Li batteries(NOT included)MOUNTING HOLE SIZE3.0mm



What's in the box ?

1 x UPS Hat (B)
1 x 8.4v Battery Charger 
1 x Acrylic protection panel
1 x Screws pack 

  • The 18650 batteries are NOT included
  • Please note that the battery length SHOULD be less than 67mm, some batteries with protection plate in the market are NOT supported, learn more.


Resources and Services :

WIKI: UPS_HAT_(B)

















(** Raspberry Pi, Cables are for reference ONLY, the Raspberry Pi, cables and Fan HAT are NOT included.)






R419.90  Inc VAT
PiJuice HAT - A Portable Power Platform For Every Raspberry Pi (PiJuice HAT)
Description:

As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it was self-powered and portable. Introducing PiJuice! A fully uninterruptible power supply that will always keep your Raspberry Pi powered.

Our revolutionary PiAnywhere technology contained in every PiJuice HAT - is the best way to take your Pi off the grid! The real time clock (RTC) on board will let your Pi know what time it is even with no power input or internet connection. Alongside this is an integrated microcontroller (MCU) chip which will manage soft shut down functionality and a true low power deep sleep state and intelligent startup.

You will be able to always keep track of the charge levels and other info with the two built-in tri-coloured RGB LEDs, trigger events and scripts with the three programmable buttons and since the PiJuice will use up to just five of your GPIO pins (just power and I2C), the rest are free to diversify your project. The stacking header allows you to continue to use your existing HATs and add-ons with PiJuice.

Keep your Raspberry Pi running with solar, wind and other renewable power.

Ultimate integrated power is one thing but what if we could make the Raspberry Pi renewably powered too? Solar, wind, thermoelectric and other renewable power is free, clean, and green and we're proud to have developed an affordable and efficient renewable power solution for the Raspberry Pi! PiJuice is self-monitoring and, like a space satellite, can become a completely autonomous system. Use the PiJuice as part of an autonomous camera system, weather stations, off-grid desktops, and so many other great outdoor projects. View and buy the solar panels separately.

PiJuice Video

https://youtu.be/ESVaLw51YL8

PiJuice Features:

  • Onboard 1820 mAh off the shelf Lipo / LiIon battery for ~4 to 6 hours in constant use! (with support for larger Lipo Battery of 5000 or 10,000 mAH to last up to 24 hrs )
  • A Full Uninterrupted / Uninterruptable Power Supply solution.
  • Designed for the Raspberry Pi boards A , B , 2B, 3B, 3B and Pi4 but also compatible with Raspberry Pi Zero v1.3 and Raspberry Pi Zero Wireless.
  • Integrated Real Time Clock
  • Onboard intelligent on/off switch
  • Low power deep-sleep state with wake on interrupt/calendar event
  • Programmable multi-colored RGB led (x2) and buttons (x3) with super simple user-configurable options
  • Hardware watchdog timer to keep your Raspberry Pi on and working in mission-critical remote applications
  • Our revolutionary PiAnywhere technology ? the best way to take your Pi off the grid!
  • Full power management API available to Raspberry Pi OS with auto shutdown capability when running low on batteries
  • Raspberry Pi HAT compatible layout, with onboard EEPROM for easy plug and play operation
  • Low profile design to fit inside lots of existing Raspberry Pi cases!
  • Enhanced graphical user interface (GUI) available for easy install (via APT)
  • Customisable scripts for enhanced flexibility and full report of battery status
  • All GPIOs available via stackable header for ease of expandability and connectivity
  • Charge via on-board micro USB or via the Raspberry Pi micro USB (or from onboard pin headers)
  • Batteries can be charged from different type of sources and voltages
  • Replace the battery without downtime. Compatible with any single cell LiPo or LiIon battery
  • Fully CE and FCC tested design. Battery safety tested also.

Technical Information

  • The EEPROM can be disabled and its I2C address changed for increased compatibility with other boards
  • BP7X battery - original battery from Motorola Droid 2 (A955) - 1820mAh battery
  • Microcontroller is an ST Micro STM32F030CCT6 ARM Cortex-M0, 48MHz, F64KB, R8KB, I2C, SPI, USART, 2.4-3.6V
  • Charge IC - BQ24160RGET Charger IC Lithium-Ion/Polymer, 2.5A, 4.2-10V
  • Fuel gauge IC - LC709203FQH-01TWG Battery Fuel Gauge, 1-Cell Li-ion, 2.8%
  • EEPROM - CAT24C32WI-GT3 EEPROM, I2C, 32KBIT, 400KHZ, 1V7-5V5
  • Optional spring pin - Mil-Max 0929-7-15-20-77-14-11-0
  • Compatible with any 4 pin battery on board that can be used with 00-9155-004-742-006 battery contacts from AVX including the BP7X, BP6X, and any compatible batteries including the 1600mAh and 2300mAh ones from CameronSino (CS-MOA853SL and CS-MOA855XL)
  • There is an on board 4 pin screw terminal block for larger off board batteries. Any single cell LiPo / LiIon is compatible. However, you use your own sourced battery at your own risk. We HIGHLY RECOMMEND using a battery with an internal protection circuit and a NTC (temp sensor)
  • Optional header for offboard button - connected to same output as SW1
  • 6 pin breakout header - with two GPIO from the ARM Cortex-M0, Vsys, 5v0, 3v3, GND connections
  • Header for optional off board solar panel / wind turbine etc.
  • Optional RF Shield attachment - Harwin S02-20150300 (can also double as an inexpensive heatsink)
  • Input voltage range - 4.2V 10V
  • Output voltage - 3.3V and 5V
  • Output amperage - maximum current at 5V gpio is 2.5A and at VSYS output 2.1A, but also this depends heavily on battery capacity. For BP7X have measured around 1.1A at 5V GPIO and around 1.6A at VSYS output. Obviously, this also depends heavily on the current draw demanded by the Raspberry Pi/device itself. To achieve a maximum of 2.5A it will need battery over 3500mAh.
  • Boxed weight - 96g
  • Boxed dimensions - 12.2 x 10.8 x 3.5 cm
  • Unboxed weight - 57g
  • Unboxed dimensions - 6.5 x 5.6 x 2 cm

PiJuice HAT box contains

  • 1 x PiJuice HAT
  • 1 x Battery and battery surround
  • 1 x PiJuice guide
  • 4 x Mounting posts attached to PiJuice
  • 8 x Mounting screws (4 are already assembled to the board)
  • 1 x Pogo pin
  • 3 x Stickers

Software & Resources

R869.90  Inc VAT
Per Page      1 - 12 of 12
  • 1