Special Offers

Sort By:  
R60.38  Inc VAT
R89.90
R5,999.90  Inc VAT
R7,499.90
This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing / Making/ Prototyping etc ASAP.
R749.90  Inc VAT
R834.90
R699.90  Inc VAT
R785.90
R18.90  Inc VAT
R20.90
R199.90  Inc VAT
R229.90
R299.90  Inc VAT
R309.90
SD to SD Extension Cable 45cm (SD to SD ext)
Description:

This SD card to SD card extension cable is perfect for protecting your SD card port! The flat flex cable is 45cm long, so it's perfect for mounting your SD card separately for easy access.

SD to SD Extension Cable Features:

  • SD Card Male to SD Card Female
  • Flex Cable ~ 45cm
  • Supports SD Card Sizes: 16GB, 32GB 64GB 128GB
  • Supports SD/SDHC/SDXC Cards

What's in the box?:

1 x SD Extension Cable
R60.38  Inc VAT
R89.90
Creality Ender-3 S1 3D Printer (Ender-3 S1 printer)


The Creality Ender-3 S1 is an advanced 3D printer that features Creality’s Sprite dual-gear extruder for smooth, precise printing. Compatible with a variety of filaments, it also features automatic bed levelling, 32-bit silent motherboard, 4.3-inch ‘knob’ LCD screen, easy model removal and filament runout detection.

Sprite dual-gear extrusion

The Creality Ender-3 S1’s Sprite dual-gear direct extruder features two chrome steel gears. With a pushing force of up to 80N, it realizes smooth feeding and discharging of filaments without slipping. The Sprite extruder is lighter than other direct extruders, with less inertia and more precision, and works extremely well with flexible filaments such as TPU. 

CR Touch automatic bed leveling


The worry-free CR Touch 16-point automatic bed levelling technology saves users the trouble of manual levelling. Simple and easy to use, the intelligent levelling system can automatically compensate for the printing height of different points of the heat bed. 

Higher print precision

With a Z-axis dual-screw, Z-axis dual-motor design, the Ender-3 S1 works more smoothly and more synchronously to lower the possibility of lines and ridges on the sides of prints for improved printing quality. 

Low-noise operation, 4.3-inch knob screen

The new 32-bit silent motherboard runs at low decibel levels for more enjoyable printing. The 4.3-inch ‘knob’ LCD screen features a new UI interface for simpler interaction to experience operation by knob. It automatically shuts down when inactive for 5 minutes to save energy and for environment protection. 

Easy removal, various filaments, runout detection

The innovative removable PC spring steel print sheet makes it easier to remove models. The Ender-3 S1 is compatible with more filaments and can print PLA, TPU, PETG, ABS and more, and also features filament runout detection to avoid breakage and waste. 

What's in the box?

1 x Creality Ender-3 S1 3D Printer

Resources

Manual and software
R5,999.90  Inc VAT
R7,499.90
Raspberry Pi Zero 1 W Essentials Kit(WiFi) (zero1 W kit U2)
Get started with the Raspberry Pi with one of our pre-boxed kits for home, industry and education.


These kits are perfect for beginners that are just just getting exposed to the Raspberry Pi, Media enthusiasts looking to stream online content with Kodi, developers looking to exploit the many advantages of the RPI's GPIO pins and anybody looking to get some cool goodies at a great price! They contain all of the essential items that you need to get up and running in no time.

Please Note: These kits are pre-boxed and cannot be modified at all, we do however keep stock on all of the individual items so if you have a special need simply feel free to browse through the rest of our product offerings and select the items that you'd like.

What's in the box?


Want to take your kit to the next level?

Turn your RPI into a Media Centre
Grab yourself a remote control, install LibreELEC or OSMC when setting up your RPI and you'll be streaming in no time. You can even add a wireless keyboard, mouse or other similar controllers

Want a cheap eco-friendly PC
Grab a Keyboard and Mouse, select Raspbian when setting up your RPI and you'll be browsing the web, sending emails, editing spreadsheets and watching videos just like you're used to with a desktop/laptop.

We know you love retro gaming!
RetroPie allows you to turn your Raspberry Pi into a retro-gaming machine  Check out our Arcade section, whether you just want a retro control or a mini DIY arcade cabinet we have what you're looking for.

Did somebody say Robotics?
We've got some cool beginner's items in our robotic section

Our Kits come with the latest version of Raspberry Pi OS pre-installed, While we will certainly try our best to assist with any software related questions we cannot offer any kind of official support on community driven, open source, or non-PiShop produced proprietary software.
NOOBS, Raspbian, RetroPie, LibreELEC and OSMC are all examples of open-source software, please visit the developer's respective websites for more info.

A whole bunch of other really cool technical info can be found here.

Where do I start?.........Getting Started with Raspberry Pi


This brilliant Starter Kit is a perfect starting point to get you up and running with your RPI Zero so you can get Playing / Making/ Prototyping etc ASAP.
R749.90  Inc VAT
R834.90
EDU:BIT Training & Project Kit for micro:bit (micro:bit not included) (Edu:bit excl microb)
This beginner-friendly micro:bit kit is specially designed to encourage kids to explore STEAM and learn coding.

You can easily program EDU:BIT using open-sourced Microsoft MakeCode Editor. Just add EDU:BIT MakeCode Extension and you’re good to go. If you’re a beginner, you can start with the block programming mode; simply drag, drop and snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on MakeCode Editor for text-based programming.

New to coding? Don’t worry. This kit comes with a booklet covering 10+1 hands-on coding lessons, which have been creatively structured to introduce programming basics in a fun and engaging manner. Each chapter features a classic childhood game such as Rock Paper Scissors, Snakes and Ladders, Twister, and Simon Says. Follow the step-by-step guide to build the games and then have fun playing with your friends! *Game accessories are provided in this kit.



At the end of each chapter, there is a challenge which requires you to apply what you’ve learned to build a useful application for your classroom. Give it a try and if you’re stuck, we’re always here to help you. You can go to our online Resource Hub for sample codes and extra resources.

SPECIAL FEATURES

Start having fun with EDU:BIT right out of the box. Start coding right away and see your board lights up and plays melody with the press of a button. No wiring required when used as a training kit. 

Cannot control servo motor and play music at the same time on your micro:bit? Servo motor refuses to move correctly? Worry no more! EDU:BIT takes care of these issues with its dedicated controller and power supply. It can even support up to 3 servo motors and 2 DC motors to actuate any creative projects you will build.

Each feature and its associated micro:bit IO pin is clearly labeled on the board for easy reference. In addition, indicator LEDs are built in on EDU:BIT to ease troubleshooting for both digital and analog IO pins. 

Ready to build your own projects? You can break off the modules on EDU:BIT board for more flexibility in your project design. Plug-and-play cables are provided for you to connect the broken off Bits to the main board. 

Features







EDU:BIT Specifications


  • 1x Piezo buzzer with audio jack
  • 1x Sound sensor
  • 1x Potentiometer
  • 1x IR sensor
  • 4x Programmable RGB LEDs 
  • 3x Big LEDs (traffic light module - red, yellow green)
  • 2x Push buttons 
  • 3x ports for servo motors
  • 2x ports for DC motors
  • 1x port for I2C Interface (3.3V)
  • Dimension:  157.50 mm x 124.50 mm x 19.00 mm

What's in the box?


1 x EDU:BIT board 
1 x BBC micro:bit board  This kit DOES NOT include micro:bit board.
1 x Step-by-step Guide Book
1 x USB power and data cable
2 x Game maps 
2 x Game accessories
7 x Grove cables
1 x Servo motor
1 x DC motor
1 x Pulley wheel
1 x Fan blade

Resources

R769.90  Inc VAT
R799.90
Deburring Tool for 3D Print Post Processing with blade set (3D Deburring Tool Set)
A deburring tool is another essential 3D printing tool because it helps with cutting extra material from your 3D prints. This tool is used with functional 3D prints which have holes. The section which sits directly on the build plate usually has a small amount of elephant’s foot and a deburring tool is the best solution for removing internal skirts and burrs from rough edges around circular holes. It’s a really cheap tool, so there’s no reason not to get one for a better 3D print result :)

This Deburring Tool includes a 360 rotational handle with a stainless steel blade that has the optimal profile for deburring 3D-printed plastic parts. If you buy with a blade set, you will get an extra 10pcs blade

 

Note: To change the blade and open the top cover, you need to press the button in the red circle.



Features

  • Sharp & Durable Material - The blades are made of HSS high-speed steel. You could deburr pipes and assorted machined parts such as PVC or ABS pipes, Soft Metal (Aluminum, Copper), and Wood
  • Rotary Blades & Comfortable Handle - Rotary blade is specifically designed for cross holes, deep holes, straight edges, and curved edges. Plus, the aluminum alloy handle makes it easy to finish your cutting
  • Greatest Hand Deburring Tool - It is a nice little tool for a lathe. It is quicker than a grinder and can get into tight angles. So every craftsman is worth having a deburring tool set
  • Wide Application - Suitable for home use, plumbing applications or as a professional workshop tool.

 

Specifications

Burr Handle
    • Material: Plastic
    • Color: Blue
    • Size: 125mm x 22mm
    • Weight: 26.3g

 

Blade
    • Material: M2 High-Speed Steel (HSS)
    • Hardness: 63RC
    • Blade Including Angle: 40 degree
    • Blade Lenght: 46mm
    • Blade Diameter: 3.2mm
    • Weight: 2.6g



What's in the box?

1 x Deburring tool
10 x blades

Replacement blades are available

Resources

How to use and reviews from My Tech Fun
You might also like this 3D printable case to keep all your blades safe.

R199.90  Inc VAT
R219.90
ElecFreaks micro:bit Smart Home Kit (without micro:bit) (micro:bit smart home)

Note: This kit comes without micro:bit, please get it separately here


Smart Fan

Check out this video using this smart home kit, this is Smart Fan

Smart Home Kit is a product about smart home projects base on micro:bit. We have selected components commonly used at home as TMP36 temperature sensor, sound sensor, crash sensor, servo, motor. You can build a scene like a windowsill, wardrobe and fish tank, create yourself smart sweet home and programming to intelligently driving them using micro:bit. The smart home is what makes life more practical and playing with it is what makes life more interesting.

Voice Activated Light


Here is a video by Cytron: Voice Activated Light using this kit in Bahasa Malaysia with English Subtitles:

 

Features

  • Plug and use connection
  • Rich tutorial cases
  • Connect limitless creativity with different sensors

What's in the box?

1 x 3V sensor:bit
1 x Crystal Battery Box - 2 x AAA
1 x Crash E-Blocks
1 x TMP36 temperature sensor E-blocks
1 x Rainbow LED E-blocks
1 x Simulation noise sensor E-blocks
1 x Light sensor E-blocks
1 x Soil Moisture sensor E-blocks
1 x Relay E-blocks
1 x DC Motor E-blocks
1 x 180º Servo E-blocks
1 x Submersible pump E-blocks
1 x Screw Driver
1 x Micro-B USB Cable
1 x OLED Display
1 x Smart Home kit manual book

R1,199.90  Inc VAT
R1,699.90
UNO R3 Compatible (CH340) Beginner Kit (Uno Starter kit RFID)

Note: This is the beginner kit for Arduino UNO R3 lovers. It comes with everything (except computer) that you need to learn Arduino :)

This kit comes with Arduino UNO compatible board, UNO R3 Compatible with CH340. As most shields and libraries are based on UNO, it is the best board to learn the Arduino ecosystem. It is fully compatible with the original Arduino UNO R3 (except for USB to UART chip - CH340), so all shields, examples, sketches for Arduino UNO R3 is applicable on this board.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently support Mac OS X, Windows, and Linux).

Now, with this comprehensive beginner kit which includes the famous UNO R3 compatible as the main controller. All the applications and projects you want can be done with this set.

This kit is suitable for:

  • Engineering students: Controller and Electronics are a must-have topic in all engineering courses, Electronics, Mechanical, or even Civil Engineering. This kit is perfect for you to understand the basics of controller, electronics, sensors, actuator, and programming.
  • Teachers: Perfect for student-teacher projects, for example in RBT (Reka Bentuk Teknologi)
  • Electronic enthusiasts: Kickstart your next project utilizing all the components in this kit.
  • Robot Builders: All the sensors and actuators are suitable in robotics.
  • Software Engineers: Arduino will be an excellent platform for establishing interfaces on the computer to receive data from the outside world and for communication applications.

Features

  • Comes with UNO R3 Compatible (CH340) board
  • Pack in a two layers plastic case, suitable for long usage and tidy storage
  • Includes various type of sensors, and actuators (motors, LEDs, buzzer)
  • Perfect for learning Arduino ecosystem, electronics, and programming
  • You only need a computer to get started
  • Power everything from your USB port which is needed for program loading in any case.

What's in the box?

1 x UNO R3 CH340 (Arduino UNO R3 compatible) board
1 x USB Type B Cable, to power and program loading into UNO R3 CH340 board, 40cm length
1 x 30 pcs Jumper Cable Male to Male
1 x 10 ways Dupont Male to Female wire
1 x Large Size Breadboard, 830 holes
1 x Four segments 7 Segment Display
1 x Single 7 Segment Display
1 x 8 x 8 Dot matrix module
1 x Parallel LCD 16 * 2 Character
1 x UNL2003 Driver board
5 x 5mm Red LED
5 x 5mm Green LED
5 x 5mm Yellow LED
1 x 28BJJ Unipolar Stepper Motor
1 x SG90 Servo Motor
1 x 9V Battery Clip Arduino Compatible
5 x 220R Resistor
5 x 10K Resistor
5 x 1K Resistor
1 x 10K potentiometer/variable resistor
1 x Male Header 1 x 40, for solder 2x16 Character LCD
1 x Active Buzzer
1 x Passive Buzzer
4 x Yellow Cap Push Button
1 x LM35 Temperature sensor
1 x Tilt sensor
1 x Flame sensor
1 x Water sensor
2 x 5mm LDR
1 x IR sensor (LED shape)
1 x Infrared Remote Control Receiver
1 x IR Remote (battery CR2025 is included)
1 x 74HC595N IC, Serial to Parallel IC for Output pin expansion
1 x 4 x 4 Key button
1 X RFID RC522 Mifare Module
1 X RFID Mifare keychain
1 X RFID Mifare card
1 x Joystick module
1 x Sound module
1 x Relay module
1 x 9V battery snap to DC Barrel Jack (9V battery is NOT included)
1 x RTC module (coin cell battery is included)
1 x Small SMD parts case

Resources



R699.90  Inc VAT
R785.90
Mecer DC UPS-5200 Lithium Battery On-line UPS (DC 5200mAh UPS router)

Mecer UPS-5200 7.4V 5200MAh Lithium Battery Online UPS.
For WiFi Router and ONT.
With 2 way DC connector split, Autostart when plugged in.
Multi-colour indicator, Built-In Li-ion battery.

Technical Specifications

- Built-in Li-ion battery
- Microprocessor control guarantees high reliability
- Manual power off switch
- Auto start when plugged in
- Multi-color indicator
- Overload, short-circuit, over-charge, and over-discharge protection

Dimensions(LxWxH) mm

160 x 194 x 75 mm

What's in the box?

1 x Mecer DC UPS-5200 Lithium Battery On-line UPS
1 x Power Cord
1 x Pack of six connector types

R862.50  Inc VAT
R999.90
Mini Screwdriver Set of 6 (mini screwdriver set(6))
Perfect for Electronics, Computers, Watch Repair, Jewelry Repair and Fixing Anything project related with Micro Screws

6 DIFFERENT SIZES / STYLES


  • 0-Point Phillips
  • 1-Point Phillips
  • 1.4mm Flathead
  • 2.0mm Flathead
  • 2.4mm Flathead
  • 3.0mm Flathead

What's in the box?

6 x mini screwdrivers
R18.90  Inc VAT
R20.90
Power Cable 3 Pin Plug to Kettle Cord / IEC C13 Plug 1 Meter (power IEC 1m cable black)
Product Overview

The IEC (C13) to South Africa mains cable, more commonly know as a kettle lead is used for powering a variety of electrical appliances such as desktop PC’s, monitors, scanners, printers, flat screen TV’s ,ceiling mounted projectors and a whole host of other equipment. The PVC connectors are moulded to provide a high quality cable which is perfect for home or office use.
 

What's in the box?

1 x power cord with plug
R34.90  Inc VAT
R46.90
Duracell 1.5V alkaline AAA battery - single (Duracell AAA single)
Engineered to deliver that kick off additional power, Plus Power batteries are available in size AA, AAA, C, D and 9V. Plus Power batteries provide reliable power for your everyday devices like motorized toys, flashlights, portable games consoles, remote controls, CD players, etc. and Duralock Power Preserve technology keeps them charged for up to 10 years in storage

Duracell Plus Power batteries – long lasting power guaranteed. These multi-purpose batteries are ideal for reliably powering everyday devices. Duracell Plus Power batteries give you the freedom to enjoy the use of your appliances by giving you a product you can rely on. The Duracell Plus Power batteries are best used when you are looking for reliable, long-lasting power in your every-day devices such as motorized toys, flashlights, portable games consoles, remote controls, CD players, etc. Duralock technology keeps unused Duracell batteries fresh and powered for up to 10 years in ambient storage.


Features

- Long-lasting power, guaranteed
- Duralock
- Leakage prevention
- Suitable for everyday devices
- Long-lasting power, guaranteed
- 1.5V Alkaline

What's in the box?

1 x AAA Duracell battery

R15.90  Inc VAT
R19.90
Duracell 1.5V alkaline AA battery - single (Duracell AA single)
Engineered to deliver that kick off additional power, Plus Power batteries are available in size AA, AAA, C, D and 9V. Plus Power batteries provide reliable power for your everyday devices like motorized toys, flashlights, portable games consoles, remote controls, CD players, etc. and Duralock Power Preserve technology keeps them charged for up to 10 years in storage

Duracell Plus Power batteries – long lasting power guaranteed. These multi-purpose batteries are ideal for reliably powering everyday devices. Duracell Plus Power batteries give you the freedom to enjoy the use of your appliances by giving you a product you can rely on. The Duracell Plus Power batteries are best used when you are looking for reliable, long-lasting power in your every-day devices such as motorized toys, flashlights, portable games consoles, remote controls, CD players, etc. Duralock technology keeps unused Duracell batteries fresh and powered for up to 10 years in ambient storage.


Features

  • Long-lasting power, guaranteed
  • Duralock
  • Leakage prevention
  • Suitable for everyday devices
  • Long-lasting power, guaranteed
  • 1.5V Alkaline


What's in the box?

1 x AA Duracell battery

R16.90  Inc VAT
R19.90
Eveready 1.5V powerplus Silver AA zinc battery - single (Eveready AA single)

Features

  • AA SIZE
  • ZINC BATTERY
  • POWERPLUS SILVER

What's in the box?

1 x AA Eveready battery

R9.90  Inc VAT
R10.90
Logitech M171 Wireless Mouse - Black (M171wirel mouse black)
Plug & Play Simplicity

M171 is ready when you are. Simply plug the receiver into a USB port on your device to start working in seconds. The small size and smooth cursor control make it great for tight workspaces and busy desks. Enjoy the world of wireless!

 ANY HAND, ANYWHERE

The compact, wireless M171 has a fully ambidextrous design that easily fits within your laptop bag, so you can get to work anywhere—whether you’re left- or right-handed.

 PLUG & PLAY WIRELESS

Up to 10 meters (Wireless range may vary based on user), environmental and computing conditions of wireless freedom with a strong, reliable USB receiver. That means no delays, no dropouts. M171 is compatible with Windows, macOS, Chrome OS and Linux and works instantly when you plug the USB receiver into your computer or laptop. Just seconds and you’re connected (Tested in Switzerland with 50 people (2022)).

 Easy Navigation, Smooth Control

Easy navigation thanks to a controlled line-by-line scrolling and optical tracking. The optical sensor gives you smooth and accurate cursor control on almost any surface. That means accurate mouse movements with no more annoying missed clicks.

Dimensions

Mouse

  •     Height: 97.7 mm
  •     Width: 61.5 mm
  •     Depth: 35.2 mm
  •     Weight (with batteries): 70.5 g

USB Receiver

  •     Height: 6.6 mm
  •     Width: 23.1 mm
  •     Depth: 18.7 mm
  •     Weight: 1.8 g

Technical Specifications

Sensor Technology

  •     Smooth optical tracking
  •     DPI (Min/Max): 1000±

Buttons

  •     Number of Buttons: 3 (Left/Right-click, Middle click)

Customization app

  •     Supported by Logi Options+ on Windows and macOS 1Available on Windows and macOS at logitech.com/optionsplus

Scrolling

  •     Line-by-line scrolling
  •     Scroll Wheel: Yes, 2D, optical

Battery

  •     Battery: 12 months 2Battery life may vary based on user and computing
  •     Battery Details: 1 x AA (included)

Connectivity

  •     Connection Type: 2.4 GHz wireless connection
  •     Wireless range: 10 m 3Wireless range may vary based on user, environmental and computing conditions.
  •     Connect / Power: Yes, on/off switch

What's in the box?

1 x Wireless Mouse
1 x USB receiver
1 x  AA battery (pre-installed)
User documentation

Resources

Logitech product page
R199.90  Inc VAT
R229.90
Pump Float Switch Water Level Controller Sensor (pump Float switch)
A float switch detects the level of a liquid in a tank or container. It floats on top of the liquid surface and acts as a mechanical switch as the liquid level goes up or down. They control devices like pumps (pump water in or out), valves (open or close inlet/outlets), or alarms to notify users.



Specifications

Shape: Triangle
Contacts: NO NC
Rated voltage: 250V(380V)
Rated current: 8A(4A)
Working temperature: 0℃<=water temperature<=65℃
Mechanical endurance: ≥100,000times
Electrical endurance:≥50,000times
Cable length: 45cm +15cm stripped
Environment: pool, water tank/dam
Control level difference > 40cm

Features

Easy to use, easy to install,
Safe, reliable, maintenance-free, non-toxic and environmentally friendly.

What's in the box?

1 x Float Switch Liquid Level Controller Sensor
R413.78  Inc VAT
R129.90
MOTION:BIT - Simplifying Motion Control with micro:bit including micro:bit and cable (MOTION:BIT kit)

Looking for a suitable micro:bit expansion board to build a robot with DC Motors and Servo Motors?

Introducing the new member to our family - MOTION:BIT.



 

This is a brainchild of makerspace.UTHMCytron Technologies, in collaboration with ISOBOT and Elvira Systems.













Program your MOTION:BIT with Microsoft MakeCode Editor graphical programming interface. Just install MOTION:BIT MakeCode Extension and you may start to code your projects. If you’re a beginner, you can start with the block programming mode; simply drag, drop & snap the coding blocks together. For more advanced users, you can easily switch into JavaScript or Python mode on MakeCode Editor for text-based programming.



Get your own MOTION:BIT and have fun building your special projects now!

Features







Board Layout


  • 11x GPIO Status LEDs
  • 11x GPIOs Breakout
  • 3x Maker Ports - general (JST-SH 4-Ways Connector)
  • 1x Maker Port - I2C
  • 1x I2C Breakout
  • 1x micro:bit Socket (vertical)
  • 4x Motor Terminals
  • 8x Motor Test Buttons
  • 8x Motor Status LEDs
  • 8x Servos Port
  • 2x RGB LEDs
  • 1x Ext. RGB LED
  • 6x 5V Supply
  • 1x 18650 Li-Ion Battery Holder
  • 1x On/Off Switch
  • 1x Ext. On/Off Switch
  • 1x Micro USB
  • 1x Power Input
  • 1x Power/Charge LED



What's in the box?

1 x MOTION:BIT
1 x Tiny Phillips Screwdriver
3 x Grove to JST-SH(qwiic) Cable
4 x Silicone Bumper
1 x  micro:bit V2.2
1 x USB micro B cable black


You might also need....

You'll find our battery selection here


R999.90  Inc VAT
R1,236.90
FreeNove Super Starter Kit for Raspberry Pi Pico WH(included) (FN Pico WH Starter Kit )
The Super Raspberry Pi Pico W Starter Kit is a comprehensive kit that includes LEDs, sensors, motors, remotes, and more. With a simple programming language, it's perfect for beginners and advanced users looking to explore the world of electronics and programming. Get creative and unleash your potential with the Super Raspberry Pi Pico W Starter Kit !

Features

  • 3 tutorials
    • MicroPython
    • C (Compatible with Arduino IDE)
    • Processing (Java))
  • 513-Page Detailed Tutorial - Comes with detailed tutorial including basic electronics knowledge. (Download needed, no paper tutorial.)
  • 177 Items - All parts needed to complete the projects in the tutorial. No soldering required.
  • 87 Projects - Each project has circuit diagrams and verified code with detailed explanations.

What's in the box?



Resources

Download tutorials here
R799.90  Inc VAT
R863.90
Raspberry Pi Approved MakerDisk microSD Card with RPi OS 32GB (Makerdisk 32GB)
Note: MakerDisk MicroSD cards (128GB, 64GB, 32GB) shipped from 11 Nov 2021 onwards are loaded with the latest Raspberry Pi OS - Bullseye (release date: 30th October 2021).

Note: The MakerDisk microSD card has been TESTED and APPROVED by the Raspberry Pi Foundation for use with Raspberry Pi Products.

 

Note: The MakerDisk microSD card comes Pre-loaded with Raspberry Pi OS and is ready to boot up on any Raspberry Pi computer. Please DO NOT format it if you intend to use it with the Raspberry Pi board.

We have also performed the writing and reading speed diagnosis and the results exceed the requirement needed for Class A1 and also the specifications by the Raspberry Pi Foundation. So we are confident to recommend this microSD to you :)

Note: There are 128GB, 64GB, and 32GB of capacity, please select your preferred memory size.

 

Features

  • Raspberry Pi Tested and Approved for use with Raspberry Pi Products
  • A microSD card from Makers to Makers!
  • Brand: MakerDisk
  • Capacity/Size: 128GB, 64GB or 32GB
    • 1GB = 1,000,000,000 bytes.
    • Actual usable capacity may be less, depending on the format. From Raspberry Pi OS, here is the capacity from file explorer, excluding the boot drive:
      • 128GB MakerDisk microSD: it is ~ 114.8GB
      • 64GB MakerDisk microSD: it is ~ 56.9GB
      • 32GB MakerDisk microSD: it is ~ 28.2GB
    • Check the capacity calculation from Wiki.
  • Pre-loaded with Raspberry Pi OS, it is ready to boot up on any Raspberry Pi board right out of the box!
    • 11 November 2021 onwards, the latest Raspberry Pi OS - Bullseye, 3.1GB, (release: 30th Oct 2021) is preloaded



The test results are better than Class A1 and Raspberry Pi Standards:

  • 32GB MicroSD:
      • Sequential Write: > 27MB/S (A1 Standard 10MB/S, Raspberry Pi Standard 12MB/S)
      • Random IOPS - Write: > 800 IOPS (A1 standard 500 IOPS, Raspberry Pi Standard 500 IOPS)
      • Random IOPS - Read: > 2700 IOPS (A1 standard 1500 IOPS, Raspberry Pi Standard 2000 IOPS)
      • Class 10, A1, U1, V10 microSD card


What's in the box?


1 x Makerdisk 32GB preloaded micro SD card

Resources

Latest image available from the Raspberry Pi Foundation Downloads

R168.90  Inc VAT
R214.39
Creality Resin Tool Kit (Resin Tool Kit)
Creality's Resin Tool Kit makes it easier for you to work with your resin printer and the models produced.

Contents of kit

Scraper - With the plastic scraper, you can easily remove your finished models from the print platform.
Brush - The small brush makes it easier for you to clean your models and tools.
PVC gloves - PVC gloves protect you from contact with resin and should therefore be used whenever you use 3D printing resins.
Stainless steel and silicone funnel - The two wide-diameter funnels make resin recycling easier for you.
Silicone pad - The silicone pad (405 x 305 mm) keeps your table clean for all resin work.

What's in the box?

1 x Creality Resin tool kit
R299.90  Inc VAT
R309.90
Acrylic open GPIO Case with fan, grill and flared heatsink for Raspberry Pi 3/4/5 (Pi345 open GPIO case)
Please Note: Raspberry Pi is not included

This DIY case requires assembly. You will need a small precision flathead screwdriver.

Features

  • Two-part Raspberry Pi case for Pi 3, Pi 4 and Pi 5.
  • Easy access to all Pi connectors
  • Open design to keep your Raspberry Pi cool
  • You can mount a HQ cam onto this case. See the hint at the end of the description.
 
What's in the box?

2 x DIY Acrylic Case layers
1 x 30mm fan
1 x 30mm fan grill
1 x processor heatsink
4 x 5mm standoffs
4 x 25mm standoffs
8 x M2.5x6 screws
4 x M3x16 screws
4 x M3 nuts
4 x rubber feet

As from 11/12/2023 we add a black heatsink (19x14x7) to this kit. You can now choose which heatsink fits your RPi processor best.

Case Assembly guide

1. Remove the acrylic protective film from the two plates
2. Install the standoffs first. Push the male part of the short standoffs through the RPi board mounting holes from the bottom upwards. Use the Female Female standoffs as nuts on the top of the RPi board. 
3. Mount the fan and fan grill on the top acrylic plate.
4. Mount the top and bottom acrylic plates using the eight M2.5x8 screws.
5. Connect your fan power cable to the GPIO port.


Hint

Why are there four extra holes on the bottom plate?

If you buy four 5mm standoffs with M2.5 nuts and M2.5x4 screws, you'll be able  to mount an HQ camera on the bottom plate of the case, on which you can then add a tripod.
R179.90  Inc VAT
R184.80
Per Page      141 - 160 of 234